08-24-2021, 07:36 PM | #1 |
Drives: 2013 2SS RS Join Date: Aug 2021
Location: Dallas NC
Posts: 4
|
Purchased ZL1 rims for my 2013 2SS RS
Anyone know what's up with these recesses around the back side of the hub of the OEM ZL1 rim where the studs pass through. My SS rims do not have this.
I've been told this is a production thing. Holding the rotors on the rims during assembly? Also, I'm looking at installing a 275/40/20 on the front 10" rim and a 315/35/20 on the rear 11" rim. Any one had fitment problems. I expect to have to tie wrap the e stop cable in the rear. |
08-24-2021, 07:39 PM | #2 |
Drives: 2013 2SS RS Join Date: Aug 2021
Location: Dallas NC
Posts: 4
|
Also, do I need new lug nuts or will the SS lug nuts work. They seem a little short, like they may bottom out?
|
08-25-2021, 08:42 AM | #3 |
Drives: 2011 Camaro SS LS3 Join Date: Oct 2020
Location: Clemson, SC
Posts: 68
|
While I cannot speak on whether the lug nuts will fit, I run a 20/40/275 and have plenty of room to not worry. The front as far as I know can fit up to a 275 without rubbing often and with the rear being somewhere in the 300s. I don't know how much power you push out of the wheels but I run a 275 all the way around so that I can rotate the tires to get more life out of them. I do not have problems with traction currently, even took it up the tail of the dragon and it did pretty well.
|
08-25-2021, 09:48 AM | #4 |
Account Suspended
Drives: 2014 camaro SS Join Date: Jan 2019
Location: nj
Posts: 268
|
here is a pic of the back of my ZL1 wheel new out of the box. I am running 285/35 and 305/35 with no issues.
|
08-25-2021, 11:28 AM | #5 |
Drives: 2013 2SS RS Join Date: Aug 2021
Location: Dallas NC
Posts: 4
|
Thank you all, this is great info and helps.yes
|
08-25-2021, 12:11 PM | #6 |
Drives: 2011 2SS/RS LS3 Join Date: Apr 2017
Location: Dallas
Posts: 482
|
Yes lug nuts will fit. I did the same when I put 2013 OEM ZL1 rims on my 11 SSRS.
My suspension was stock so I don’t have the ebrake problem. Simple bolt on and lug exchange.
__________________
GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD
|
|
|
|
|