08-26-2020, 02:38 PM | #1 |
I know it was a mustang!
|
BBK Varirune Axle Back install issue...
Hi gang. Anyone installed one of these? I purchased from Phastek for my 2010 SS Coupe. Driver side fit nice. Pass side is missing alignment with hole in rear valance by 4"!!!
Also, notice the hangars on the inlet pipe aren't symmetric AT ALL! BBK not much help, nor Phastek. I need a DIYer or a shop that's installed one to help, please!
__________________
2012 ZL1
2010 2SS/RS: Order # NJNJZJ: 2SS/RS, Blk/Blk, MT, Sunroof. 1100 = Preliminary Order: 10/28/08 0000 = Order accidentally deleted by dealer: 3/??/09 1100 = Preliminary re-order: 3/??+1/09 3000 = Accepted By Production Control: 5/21/09 3300 = Scheduled For Production: 6/2/09 3400 = Broadcast: 6/4/09 3800 = Produced: 6/17/09 6000 = Delivered To Customer: 7/1/09 R.I.P. = Totaled on 4th day driven in rain: 10/16/20 |
09-11-2020, 07:24 AM | #2 |
I know it was a mustang!
|
Some visited, none commented, but here's the end result. BBK offered me $100 to take the pipes to a local shop and have them bent. It worked. American Muffler said one pipe needed 10 degrees more bend. I sent the receipt and BBK offered me $175! $100 for the work and $75 for my trouble. Nice job, thanks!
__________________
2012 ZL1
2010 2SS/RS: Order # NJNJZJ: 2SS/RS, Blk/Blk, MT, Sunroof. 1100 = Preliminary Order: 10/28/08 0000 = Order accidentally deleted by dealer: 3/??/09 1100 = Preliminary re-order: 3/??+1/09 3000 = Accepted By Production Control: 5/21/09 3300 = Scheduled For Production: 6/2/09 3400 = Broadcast: 6/4/09 3800 = Produced: 6/17/09 6000 = Delivered To Customer: 7/1/09 R.I.P. = Totaled on 4th day driven in rain: 10/16/20 |
|
|
|
|