06-10-2018, 12:40 PM | #1 |
ACS T3S ports installed!!! (finished)
Hello C5,
I'm about to tackle the install of these bumper ports on my 2010 RJT. I'm really excited to get started however I was wondering if anybody that has installed them has any tips or tricks for the install. Thank you! Update!!!!! I finished the install, everything went great. I just took my time and measured over and over until I felt good enough to start cutting.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. Last edited by joseph.lord344; 06-13-2018 at 10:38 AM. Reason: updated the thread |
|
06-12-2018, 05:30 AM | #2 |
So I got started on doing the install. I'm taking my time and I have measured quite a few times. Seems that the ports outline that I will be cutting is symmetrical on both sides which gives me the green light to go ahead and start cutting.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
06-13-2018, 10:39 AM | #3 |
does anybody know which DRL kit would be best? I'm kind of thinking of running the eagle t3. where its three LED pods on the side of each port.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
06-13-2018, 12:37 PM | #4 |
Instagram: Sangstah
|
That came out amazing! Braver man than me doing those cuts, what did you use to cut?
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
06-13-2018, 12:58 PM | #5 |
It took a lot of guts for me to make the cuts. Lol. But I just used a dremel with a cut off wheel. And then the dremel sanding bits to fine trim. Once I made the first cut the rest was super easy.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
06-13-2018, 01:53 PM | #6 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Nice! That turned out great.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
06-13-2018, 02:33 PM | #7 |
Thank you!! I just need to order the fog light kit now to finish it all up.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
06-13-2018, 06:56 PM | #8 |
|
Nice work! Looks good!
__________________
|
06-13-2018, 07:17 PM | #9 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
I like it ...well done!!
|
06-14-2018, 06:04 AM | #10 |
Thank you very much i can’t wait to get fog lights to finish it off
Thank you!! I really appreciate it.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
06-14-2018, 06:52 AM | #11 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
gorgeous work
|
06-14-2018, 10:08 AM | #12 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
They should come from the factory like this on the SS
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-14-2018, 02:37 PM | #13 |
Thank you. I really appreciate it.
I agree!! This or the T2 ports should come stock.
__________________
2010 Camaro SS/RS RJT
Muffler Delete, Skip Shift Eliminator, Billet "Camaro" Reservoir Caps. Ported TB, Ported Intake Manifold, Stainless Power 1 7/8" with offroad pipes, MGW Short Shifter, Procharger P1SC-1 HO kit, Mighty Mouse Catch Can. |
|
|
|
|
|