GPI Stroker Dyno Graphs Added! - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rhino79 · 07-22-2017, 10:03 AM

Was nice to see ya again! Lemme know how that 60 roll went on way to airport....

Mydivorcegift · 07-22-2017, 10:53 AM

Quote:

Originally Posted by Rhino79

Was nice to see ya again! Lemme know how that 60 roll went on way to airport....

Ha Sonata didn't stand a chance.

About as much of a chance as I stood against the trooper that instant on'd me on the way home

It was good to see you too brother. About to post graphs and details. Feel free to chime in.

And thanks again for all your hard work!

Mydivorcegift · 07-22-2017, 10:57 AM

So back home. First off I have to say this set up seems like a better driver than before.

So we ditched the VVT and went with a 3 bolt cam. Cam specs? Bigger than the SS4 lol. In addition Aaron thought it would be a good idea to add the Sniper intake since we had planned to spin it higher.

LOL.

Here is the first graph showing the sniper intake. Decent power but terrible torque for a stroker motor. Sucks too because that sniper sure was pretty under the hood.

Mydivorcegift · 07-22-2017, 11:00 AM

So Aaron calls me and tells me it's a dud. And they are going to port my intake which already had the rod mod done. Here is the dyno sheet. Essentially the same HP but 40 more ft/lbs of torque. This was a back to back comparison.

Mydivorcegift · 07-22-2017, 11:02 AM

My car is not a dyno queen thanks to the big heavy wheels and tires out back and the ZL1 diff but this fall I plan to run a low to mid 10 and that should take care of that lol.

Thanks again to everyone at GPI for your hard work and even more standing behind your work!

jc615 · 07-22-2017, 12:08 PM

So the sniper killed your tq but held higher hp longer before dropping off

Rhino79 · 07-22-2017, 02:04 PM

Yeah that short runner was just too much compromise in the middle, and not enough gain/extended rev range in our opinion. There certainly are situations it will shine, but a 3800 plus lb car that won't see over 7000-7200 isn't the place for it.

I didn't anticipate as much loss in tq but I'd have been fine with it if we were up 40 hp. However that was not the case!!!

And yes it did look awesome. Lmao.

Bo White · 07-22-2017, 02:26 PM

Yeah a supermodel sure looks good but if shes not good to ya you gotta kick her to the curb....

Mydivorcegift · 07-22-2017, 11:50 PM

I confess...

I was in Mexico tonight and ran a 15 Viper from 30-110. Think he was shocked. Had him by a car.

christianchevell · 07-23-2017, 12:56 PM

LOL yes the torque is inline with my own beast makes it nice hey....LOL

Hard Parker · 07-23-2017, 04:22 PM

I wonder how that intake would work on a TT build

Rhino79 · 07-23-2017, 09:49 PM

The intake would be ok on boost.

Mydivorcegift · 07-24-2017, 10:28 AM

Quote:

Originally Posted by Hard Parker

I wonder how that intake would work on a TT build

There's an AGP car on here that has it and makes 1000rwhp. Don't know how much of that is attributed to the intake though lol.

Hard Parker · 07-24-2017, 10:32 AM

I really like it lol

Sent from my iPhone using Tapatalk

07-22-2017, 10:57 AM	#59
Mydivorcegift Future Mopar Owner Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012 Location: TN Posts: 2,373	So back home. First off I have to say this set up seems like a better driver than before. So we ditched the VVT and went with a 3 bolt cam. Cam specs? Bigger than the SS4 lol. In addition Aaron thought it would be a good idea to add the Sniper intake since we had planned to spin it higher. LOL. Here is the first graph showing the sniper intake. Decent power but terrible torque for a stroker motor. Sucks too because that sniper sure was pretty under the hood. __________________ 2005 GTO-IBM-A4-Sold 2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody

07-22-2017, 11:00 AM	#60
Mydivorcegift Future Mopar Owner Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012 Location: TN Posts: 2,373	So Aaron calls me and tells me it's a dud. And they are going to port my intake which already had the rod mod done. Here is the dyno sheet. Essentially the same HP but 40 more ft/lbs of torque. This was a back to back comparison. __________________ 2005 GTO-IBM-A4-Sold 2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody

07-22-2017, 11:02 AM	#61
Mydivorcegift Future Mopar Owner Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012 Location: TN Posts: 2,373	My car is not a dyno queen thanks to the big heavy wheels and tires out back and the ZL1 diff but this fall I plan to run a low to mid 10 and that should take care of that lol. Thanks again to everyone at GPI for your hard work and even more standing behind your work! __________________ 2005 GTO-IBM-A4-Sold 2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody

07-22-2017, 02:26 PM	#64
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,019	Yeah a supermodel sure looks good but if shes not good to ya you gotta kick her to the curb.... __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

07-22-2017, 11:50 PM	#65
Mydivorcegift Future Mopar Owner Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012 Location: TN Posts: 2,373	I confess... I was in Mexico tonight and ran a 15 Viper from 30-110. Think he was shocked. Had him by a car. __________________ 2005 GTO-IBM-A4-Sold 2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody

07-22-2017, 10:03 AM	#57
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	Was nice to see ya again! Lemme know how that 60 roll went on way to airport....

07-22-2017, 12:08 PM	#62
jc615 Account Suspended Drives: Camaro and Sierra Join Date: Jul 2012 Location: Virginia Posts: 795	So the sniper killed your tq but held higher hp longer before dropping off

07-22-2017, 02:04 PM	#63
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	Yeah that short runner was just too much compromise in the middle, and not enough gain/extended rev range in our opinion. There certainly are situations it will shine, but a 3800 plus lb car that won't see over 7000-7200 isn't the place for it. I didn't anticipate as much loss in tq but I'd have been fine with it if we were up 40 hp. However that was not the case!!! And yes it did look awesome. Lmao.

07-23-2017, 12:56 PM	#66
christianchevell old school chevy rodder Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012 Location: Oregon Posts: 5,587 View My Garage	LOL yes the torque is inline with my own beast makes it nice hey....LOL __________________ 2021 Wild Cherry ZL1 A10, Sunroof, Data, Carbon, Nav, RotoFab Dry CAI, Elite x2, Borla ATK, Driveshaft shop

07-23-2017, 04:22 PM	#67
Hard Parker OMWTFYB Drives: ZL1 Join Date: Sep 2011 Location: Phoenix Posts: 1,523	I wonder how that intake would work on a TT build __________________ 2017 Camaro 1LE Nightfall Gray Metallic RIP ☠️☠️☠️ 2017 Camaro ZL1 Black Exposed CF\|Sunroof\|6 Speed Click HERE to follow my build!! Click HERE to follow me on Instagram #savethemanuals

07-23-2017, 09:49 PM	#68
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	The intake would be ok on boost.

07-24-2017, 10:32 AM	#70
Hard Parker OMWTFYB Drives: ZL1 Join Date: Sep 2011 Location: Phoenix Posts: 1,523	I really like it lol Sent from my iPhone using Tapatalk __________________ 2017 Camaro 1LE Nightfall Gray Metallic RIP ☠️☠️☠️ 2017 Camaro ZL1 Black Exposed CF\|Sunroof\|6 Speed Click HERE to follow my build!! Click HERE to follow me on Instagram #savethemanuals