07-23-2011, 06:57 PM | #71 |
Drives: 2010 Camaro SS Bumblebee edition. Join Date: Oct 2010
Location: Oklahoma USA
Posts: 74
|
From a vinyl/ sign shop called Fast Signs
__________________
AUTOBOTS!! ROLL OUT!!
|
07-23-2011, 07:16 PM | #72 |
Drives: Soon to be ZL1 Join Date: Jun 2011
Location: BAF, Afghanistan / Huntsville, Ar
Posts: 292
|
Dude, very nice doors. I am looking up ideas to do on my Camaro. This looks awesome. I am def showing the wife this tomorrow.
__________________
USMC Veteran, Sergeant of Marines, 0481 Red Patch.
|
07-23-2011, 08:08 PM | #73 |
Drives: 2010 Camaro SS Bumblebee edition. Join Date: Oct 2010
Location: Oklahoma USA
Posts: 74
|
Tail lights finished. took about two hours. first a layer of frosted vinyl, then black vinyl with the Autobots logo cut out. Was very tricky on the outer lights as they have a much more curved surface to them. BUt with a hairdryer and a bit of stretching i managed to get them smooth enough. A few creases and odd minute bubbles but looks good.
__________________
AUTOBOTS!! ROLL OUT!!
|
07-24-2011, 07:40 AM | #74 |
Switchin' n Twitchin'
Drives: 2011 Camaro Join Date: Nov 2010
Location: Chula Vista, CA (Eastlake)
Posts: 3,145
|
Ok man, you move FAST!!! Wasn't expecting the taillights to be done that fast! Good job man!
|
07-24-2011, 10:27 AM | #75 |
Drives: 2010 Black 2SS RS A6 Inferno Join Date: Nov 2009
Location: Maryland
Posts: 1,160
|
__________________
[SIGPIC][/SIGPIC]2010 Camaro Black 2SS/RS A6 Inferno Interior Polished Rims, Sunroof
Born 11/19/09 mods: 20% tints Borla Atak cat-bak Roto-Fab intake amber footwell, dome, and trunk lighting(AAC) Decepticon Gas door Led Taillights (technostalgia) |
08-13-2011, 02:04 PM | #76 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
where did you get the autobot font?
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
08-13-2011, 04:30 PM | #77 |
Paul
|
Here is where I found some.
http://www.physics.ohio-state.edu/~sstoneb/tf/fonts/ Dafont.com is great but I have not found them there yet.
__________________
|
08-13-2011, 05:54 PM | #78 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
ok cool thx ya I use dafont but they didnt have anything
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
08-15-2011, 01:12 AM | #79 |
R. L.
Drives: 2011 Black 2SS Join Date: May 2011
Location: Dallas, TX
Posts: 63
|
Do you know if something like this is possible with a decepticon theme? or just the camaro lettering on the door sill?
|
08-15-2011, 01:24 AM | #80 |
Anderson B.
Drives: 2011 Chevy Camaro 2SS RS Join Date: Mar 2011
Location: San Diego, CA
Posts: 576
|
Man, that is insane!! Looks rly good! Great job!
__________________
2011 IOM SS/RS
|
08-15-2011, 09:39 AM | #81 |
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
Outstanding work on those door panels.....looks good.
Ivan Last edited by Ivan @ Southwest Speed; 11-20-2011 at 08:14 PM. |
08-15-2011, 11:45 AM | #82 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
My car that I am working on is a decepticon theme with JL Audio, so when I get mine done I will post some pics.
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
08-16-2011, 07:34 PM | #83 |
eeeeeeeeee
Drives: 2010 Black 2SS/RS LS3 Join Date: Sep 2009
Location: Barrie, ON
Posts: 151
|
Bravo!
__________________
|
08-18-2011, 10:27 AM | #84 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
I tried this with changing it a little, did ok for the removing the paint, but I did not want it frosted I wanted the lettering black, so stupid me I was not thinking and removed the vinyl outline sticker, and sprayed 3 light coats of taillight tint on it to make it darker but still be able to show light through, needless to say it didnt work that well it looks good but the black seeped through the silver paint and now shows through so it looks bad, I am fixing it tonight but DO NOT PAINT OVER.
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EXTERIOR & PHYSICAL | Milk 1027 | Wiki | 5 | 09-15-2010 03:40 PM |
PHASTEK Performance RK Sport Carbon Fiber OE Style Hood | Sean@Phastek | Exterior Parts & Accessories | 4 | 01-29-2010 02:45 PM |
2010 Camaro, first round of mods RS (old school) style headlight covers... | 6LITEREATER | Cosmetics and Lighting Modification Discussions | 13 | 08-08-2009 06:34 PM |
Me vs 05 style gt | 7CAMARO7 | Chevy Camaro vs... | 4 | 07-11-2009 03:31 AM |
GM Style pre-Detroit show event to feature cars and stars | KILLER74Z28 | 5th Gen Camaro SS LS LT General Discussions | 19 | 03-29-2008 12:01 PM |