Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 05-26-2018, 07:51 AM   #715
Stay Marine
Still love daily drivin'
 
Stay Marine's Avatar
 
Drives: Built '10 IBM 2SS; '15 Black Z/28
Join Date: May 2009
Location: Fort Worth TX
Posts: 759
L99 upgrades

My wife and I have had our camaros since 09, and she didnt want to mess with it until now.
At 80k miles, we took my 1 7/8s headers and HFC and put on her L99, with CAI intake and Borla cat back.

We pulled 384hp amd 400tq after the tune.

Lost a little grunt in first gear initially, but 3d and 4th gear came alive, as well as 3k to 5k range.
__________________
Stay Marine is offline   Reply With Quote
Old 06-20-2018, 11:48 PM   #716
Mr2Hard2See
Instagram: Mr2Hard2See
 
Mr2Hard2See's Avatar
 
Drives: 2011 2SS/ RS
Join Date: Apr 2018
Location: SF Bay Area
Posts: 691
Quote:
Originally Posted by Stay Marine View Post
My wife and I have had our camaros since 09, and she didnt want to mess with it until now.
At 80k miles, we took my 1 7/8s headers and HFC and put on her L99, with CAI intake and Borla cat back.

We pulled 384hp amd 400tq after the tune.

Lost a little grunt in first gear initially, but 3d and 4th gear came alive, as well as 3k to 5k range.
Was that with mail order tune?
__________________
YOUTUBE CHANNEL: Mr2Hard2See
LSA blower BTR stg 2 cam 227/242
BTR dual springs pushrods lifters retainers etc
Che bronze trunnion Ls3 timing/valley cover
Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers
Mr2Hard2See is offline   Reply With Quote
Old 06-26-2018, 10:50 AM   #717
Jetscv25
 
Jetscv25's Avatar
 
Drives: 2011 Camaro SS L99
Join Date: Jun 2018
Location: Nashville
Posts: 27
L99 to LS3 conversion BTR stage two cam,ARH,CAI

My car is a 2011 Camaro L99!! It put down 318 RWHP before any work. I have done ARH long tunes, Cold Air Inductions CAI, Circle D Torque converter 3200 single disk!!! I am now putting down 437 RWHP. I still wanted more so I installed Eaton Detriot Truetrac and GM 3.91 Gear’s!!!! This made this car move out of the hole well. I am now deciding between three supercharger and Flex fuel senor with the bigger injectors and fuel pump set up. The three supercharger sim looking at is both TVS2330 and Heartbeat Magnuson and the Whipple!!!! I have the stock axleback and the car makes a great tone. This allows you to hear the motor. https://youtu.be/dBH3EZz6DYg https://youtu.be/NHjenE_yxOM
Attached Images
  

Last edited by Jetscv25; 06-26-2018 at 11:47 AM.
Jetscv25 is offline   Reply With Quote
Old 06-26-2018, 10:55 AM   #718
hou30guy

 
Drives: 2011 convertible 2ss/rs
Join Date: Sep 2015
Location: Houston
Posts: 971
If u made 437 someone dyno is ummm, i did cam, headers, cai, and dod delete and if i remember right it was around 420

Sent from my SM-N950U using Tapatalk
hou30guy is offline   Reply With Quote
Old 06-26-2018, 11:42 AM   #719
Jetscv25
 
Jetscv25's Avatar
 
Drives: 2011 Camaro SS L99
Join Date: Jun 2018
Location: Nashville
Posts: 27
The Dyno was mainline Dynolog 2500 hp Hub dyno and lab grade widebands
Jetscv25 is offline   Reply With Quote
Old 06-26-2018, 11:48 AM   #720
krisprz2010camaross

 
krisprz2010camaross's Avatar
 
Drives: 2010 Camaro 2ss/Rs Transformers
Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
Quote:
Originally Posted by Jetscv25 View Post
The Dyno was mainline Dynolog 2500 hp Hub dyno and lab grade widebands


Oh ok that makes more sense now. Hub dynos show greater numbers compared to dynojet and especially mustang dynos haha
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage
LS3 conversion
Vararam intake(tune model)
Kooks LT headers & cats delete
Corsa ZL1 3" exhaust
RedBarn Racing Tune
CMS Stage 3 Cam
AFR CNC ported heads
MSD Spark plug wires
LNC-2000 Launch controller
NGK TR6 Spark Plugs
1le strut tower brace-TPIS spacers
Nick Williams 102mm throttle body
Fast lsxr 102 intake manifold
Slp 25% UDP
Katech Tensioner Pulley
Circle D 3600-3700 multi disk Stall
GM 3.91 gears
DDS carbon fiber driveshaft
ZL1 fuel pump & injectors
Flex fuel sensor(91/E85)
https://wheelwell.com/kris-perez
krisprz2010camaross is offline   Reply With Quote
Old 06-26-2018, 02:26 PM   #721
Jetscv25
 
Jetscv25's Avatar
 
Drives: 2011 Camaro SS L99
Join Date: Jun 2018
Location: Nashville
Posts: 27
I should have over 600 HP when I strap the supercharger on and do the flex fuel sensor to run E-85 or 93 pump! That 3.91 gear gets the car up and moving for sure! https://youtu.be/Ovo_Zd5JLxk
Jetscv25 is offline   Reply With Quote
Old 06-26-2018, 02:46 PM   #722
hou30guy

 
Drives: 2011 convertible 2ss/rs
Join Date: Sep 2015
Location: Houston
Posts: 971
https://youtu.be/wqc5snH17is


Red convertibles ayeee

Sent from my SM-N950U using Tapatalk
hou30guy is offline   Reply With Quote
Old 06-26-2018, 02:52 PM   #723
hou30guy

 
Drives: 2011 convertible 2ss/rs
Join Date: Sep 2015
Location: Houston
Posts: 971
That sc whine tho

https://youtu.be/B8ABxCkGGGk

Sent from my SM-N950U using Tapatalk
hou30guy is offline   Reply With Quote
Old 08-24-2018, 09:27 PM   #724
WS86
 
Drives: 2010 1SS 1.2VVT TSP Cam DOD delete
Join Date: Aug 2018
Location: canada
Posts: 7
Texas speed 1.2 VVT cam, 1 3/4in long tubes with high flow cats, Cold Air Inductions intake & corsa catback.
Attached Images
  
WS86 is offline   Reply With Quote
Old 09-03-2018, 08:29 PM   #725
Kylejames83
 
Kylejames83's Avatar
 
Drives: 2011 camaro 2SS
Join Date: Apr 2017
Location: Wichita kansas
Posts: 134
After dealing with remote tuning short falls, had to take it dyno and put down 428 horsepower and around 380 torque. I thought it would be a bit more. TSP VVT 2.2, CAI cold air, tsp 1 3/4 headers, magnaflow exhaust, 3.91 gears
Kylejames83 is offline   Reply With Quote
Old 09-03-2018, 09:01 PM   #726
pyroguy
Started#gottalovethatblue
 
pyroguy's Avatar
 
Drives: ABM #831
Join Date: Apr 2013
Location: TN
Posts: 6,901
Quote:
Originally Posted by Kylejames83 View Post
After dealing with remote tuning short falls, had to take it dyno and put down 428 horsepower and around 380 torque. I thought it would be a bit more. TSP VVT 2.2, CAI cold air, tsp 1 3/4 headers, magnaflow exhaust, 3.91 gears
Good to know about what to expect. I’ve been looking at this cam and while I have 1 7/8” headers, it’s nice to have a ballpark number if I don’t get the heads worked on since they’ll be off anyway.

Do you have any sound clips? I’d love to hear it idle and roar!
__________________
'10 Camaro 2SS/RS | Aqua Blue #831 of 3,903 | Silver Stripes
Check out my build thread
pyroguy is offline   Reply With Quote
Old 09-03-2018, 09:30 PM   #727
PostNup
CAR-DASHIAN
 
Drives: 2015 Ashen Gray Metallic 2SS/RS L99
Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 540
I'm going with a custom grind vvt cam in a couple of months. Gonna have the heads milled while they are off... its only $150 and should raise the compression up to 10.8-11.0:1. Cheap horsepower since they are going to be off. Will post the dyno when done.

Rest of gear going in will be BTR dual springs, trunnions, ls7 lifters, hardened rods, melling oil pump, c5r timing chain.
__________________
PERFORMANCE: ColdAirInductions CAI, ADM Race Scoop, Cordes Performance Racing Ported TB/IM/Custom VVT Cam, WFO Milled Heads, Stainless Power 1 7/8" LT/3" HFCs, JBA 3" Comp. Cat-Back, Taylor 10.4mm Plug Wires, Tim King Performance Stage 3 6L80, Circle D Billet 3600 Stall, Nic D ECM/TCM Tune, - 458rwhp/413rwtq (prior to PIM), Forgestar F14 (F)18" / (R)17" Rims.

SUSPENSION: Z/28 Rear UCA Bushings, Carlyle Racing LCA/TA, BMR Adj. Toe Rods/Xtreme Anti-Roll Bar, Justice Pete Castor Locks/Radius Rod Inserts, Pegasus Billet Rear Cradle Bushings, Mickey Thompson Street SS II 305/45/17 tires.
PostNup is offline   Reply With Quote
Old 09-03-2018, 09:49 PM   #728
KB85
Banned
 
Drives: Camaro
Join Date: Aug 2018
Location: Ohio
Posts: 54
Quote:
Originally Posted by Kylejames83 View Post
After dealing with remote tuning short falls, had to take it dyno and put down 428 horsepower and around 380 torque. I thought it would be a bit more. TSP VVT 2.2, CAI cold air, tsp 1 3/4 headers, magnaflow exhaust, 3.91 gears
That’s right where I was with tsp vvt2 cam
KB85 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
L99 Love Mod4SS 5th Gen Camaro SS LS LT General Discussions 95 02-14-2015 07:51 PM
Dyno Dynamics AWD Dyno @ Hennessey Performance Hennessey Performance USA - Texas 0 08-08-2009 10:03 AM
LS3 Tune Only Results .. Also stock LS3 vs. L99 dyno graph LPFSTheFett Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 5 08-05-2009 07:04 AM
Tuning LS3 vs L99 Evilangel Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 17 10-30-2008 10:22 AM
L99 engine specifications Tran Wiki 0 10-19-2008 11:40 AM


All times are GMT -5. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.