06-24-2022, 01:36 PM | #15 | |
Drives: 2014 2SS/RS 1LE Join Date: Apr 2022
Location: Illinois - NW Chicago suburbs
Posts: 17
|
Quote:
I doubt there's any frame damage since the radiator (condenser?) wasn't even touched, but the bike did hit at the mounting point of the crash bar so i'm not sure how much energy it was able to absorb. the front bumper i assume comes with the fascia, all my lights seemed to still be functional so that's good especially since i have the RS package meaning to find replacement lights would be harder i presume. gonna have to get a loaner for now
__________________
Black 2014 2SS/RS 1LE Stock... for now NW Chicago Suburbs |
|
06-24-2022, 01:42 PM | #16 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Hood isn’t difficult at all as there are plenty of used ones available if you wanted to go that route (I would). Same with the bumper itself; however, the 1LE splitter is impossible to find, so that’s either aftermarket or paying a crazy amount for used. It will NOT come with the bumper as it’s a standard SS bumper.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
06-25-2022, 11:41 AM | #17 | |
Drives: 2014 2SS/RS 1LE Join Date: Apr 2022
Location: Illinois - NW Chicago suburbs
Posts: 17
|
Quote:
going with a used hood while it may be easier, i'm not sure how doable that is for the shop themselves to do. they're obviously going to want to go with a brand new hood so they can get the bill as high as possible. i gotta call them on monday; i found a bumper for sale about 4 hours from me. same color, the car had the RS package (i'm not sure if that changes anything cosmetically on the bumper). My hope is that they allow me to get that bumper and have them install it. Otherwise they said late july would be estimated arrival of bumper parts
__________________
Black 2014 2SS/RS 1LE Stock... for now NW Chicago Suburbs |
|
06-25-2022, 04:18 PM | #18 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
It’s your car - you determine what parts are used. If the shop won’t work with you then find another shop.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
06-25-2022, 06:41 PM | #19 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,435
|
^^^ This. If you can save some money on the cost of the parts, they should be good on that. A lot of shops use what they call LKQ, (like kind and quality) and they would be used parts off a donor car. Been there and seen that back when. Like demon stated, it's your car and you make the calls, not them.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
06-26-2022, 06:32 AM | #20 |
Drives: 2013 ZL1 Join Date: Sep 2021
Location: Virginia
Posts: 301
|
If you supply the parts and later on there is an issue its on you. If they supply the parts and there is an issue its on them. Something to think about when weighing your options.
|
06-26-2022, 11:55 AM | #21 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
After looking at the video again, I’d venture you could probably just fix it yourself. These bumpers and hoods go on and off so easy. From the looks of it, not much underneath looks touched. Here’s mine when I pulled the engine and transmission - you can see there’s not much there. If it were me, I’d source used bumper and hood that’s already “weathered” and matches the fenders and doors rather than having a shop paint and blend stuff. You’ll get all the insurance money for the body shop estimate, so pocket all the savings and buy some mods!
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
06-27-2022, 12:41 AM | #22 | |
Drives: 2014 2SS/RS 1LE Join Date: Apr 2022
Location: Illinois - NW Chicago suburbs
Posts: 17
|
Quote:
i've been able to find a bumper for sale, the hood is a little harder to find i don't think the headlights are damaged, but i know for a fact a good bit of the fascia in and out has been cracked. I picked up a piece of it off the road before they came and swept everything up. i found it in a diagram but can't seem to remember the number or name oh well it'd be a big decision to make, i'd just have to make sure that all the parts that broke i can get a replacement for. bumper is the biggest thing since i think i could get away with no hood for a bit, also since i've already found it i'd be 50% done. all the brackets and fascia and trim pieces though that's my worry that i'll miss some
__________________
Black 2014 2SS/RS 1LE Stock... for now NW Chicago Suburbs |
|
07-25-2022, 02:03 PM | #23 |
Drives: 2014 2SS/RS 1LE Join Date: Apr 2022
Location: Illinois - NW Chicago suburbs
Posts: 17
|
so it turned out to be nothing mechanical. when i got my new tires put on, it seems that a 1/4 oz. wheel weight found its way inside my RR tire. at low speeds it would fall off the tire inside and bounce off the barrel of the wheel, creating the noise i was hearing.
It led me to get a replacement kit for the rear drum brakes and upon removal of the wheel i could feel something bouncing around inside. Silver lining though is that i found out that my e brake wasn't adjusted properly as even the last click was barely enough to hold the camaro from rolling away. so i got that adjusted, now 4-5 clicks up and it's tight. anyways problem solved. now to eliminate the clutch chatter (maybe?), a/c clutch noise, alternator whine, driveline slack, and probably more. anyone have an acs cf 1le splitter i can buy?
__________________
Black 2014 2SS/RS 1LE Stock... for now NW Chicago Suburbs |
07-25-2022, 02:50 PM | #24 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,435
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|