03-22-2023, 11:06 AM | #1 |
Rear BMR suspension parts
BMR Trailing Arms TCA026R
BMR Control Arms TCA028R BMR Heavy-Duty Rear Toe Rods TR002R BMR Trailing Arm Bushing Kits BK006 Red in color. All parts, but the bushing kit are used for about 4k miles. The bushing kit is new, and never installed. Holes were drilled into the control arms, for the mag ride height sensors, as the holes are not there from BMR. There are two holes in the driver side arm, as the first hole was not in a good location. All parts were purchased from Summit. Can provide proof of purchase if needed. Parts were previously on a '14 ZL1. I really don't want to break up the set. $450 for all, shipped. I'm not on here that often, may be easier to reach me at TopDawg_43@hotmail.com if I do not promptly respond. Last edited by TopDawg_43; 03-22-2023 at 02:37 PM. |
|
03-22-2023, 12:21 PM | #2 |
Drives: 2010 2SS RS Join Date: Mar 2017
Location: Arkansas
Posts: 57
|
Any photos? Interested but would like to see where the holes are located.
Thanks! |
03-22-2023, 12:43 PM | #3 |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 838
|
Where are you in North Carolina? Might be able to save you the effort of shipping.
Were you running Airlift 3H? IS that why the holes were drilled? Thanks, Brian |
03-22-2023, 02:29 PM | #4 |
I thought I had pics of the parts removed, but I do not. I'll have to take some when I get home.
Here are a couple of pics of the parts still on the car. The green arrow is pointing to the rod that had to be attached to the control arm. I'll get pics of the other side of the control arms as well. |
|
03-22-2023, 02:31 PM | #5 | |
Quote:
No, not running an Airlift. The car has factory mag ride suspension. Without it, the car would throw a suspension code. |
||
03-22-2023, 02:40 PM | #6 |
03-22-2023, 04:15 PM | #7 | |
Drives: 15 Camaro 2SS M6 Join Date: Jan 2020
Location: BC
Posts: 732
|
Quote:
what happened to $450 shipped? |
|
03-22-2023, 04:24 PM | #8 |
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,013
|
He's saying the parts he is selling for $450 were $820 new...
|
03-22-2023, 04:25 PM | #9 |
Drives: 2013 ZL1 Join Date: Nov 2015
Location: Northeast
Posts: 72
|
.
|
03-22-2023, 08:37 PM | #10 |
03-22-2023, 09:44 PM | #11 |
Here you can see the holes in each control arm.
|
|
03-23-2023, 06:19 AM | #12 |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 838
|
Sent you a PM
|
03-23-2023, 11:40 AM | #13 |
Pics as requested. You can see all 3 holes that were drilled.
|
|
03-23-2023, 11:47 AM | #14 |
SOLD!!!!
|
|
|
|
|
|