Need volunteers for exhaust samples Thursday night...

[John Deere Racer]

Do you need a LG motorsports set up?

I have the full exhaust
Best sounding exhaust out ther!!!!

[camaros and vettes]

Originally Posted by PQ

Where did you put your switch? I put mine here.

Attachment 399320

under the seat

[camaros and vettes]

Originally Posted by PQ

Yup. I just didn't like the way it mounted. I discovered a problem that they had to go back and fix. Leave it to me. hahahaha

When you activated the front seat to lift up it bent the plastic mounting plate. The car they designed it on had the mounting point fully lowered so it would mount just fine. But they never knew that that point rotated up if you lifted the knee portion of the seat. I helped them to figure out a fix. Basically cut the upper portion of the plate off. The plates they ship now are a little different.

But I still wanted a place I could push the buttons without moving or bending.

it was my car that they used

[PQ]

Originally Posted by luckynuts

If you're still looking for cars I have a cammed LS3, Dynatech 1 7/8" LT's , high flow cats, Flowmaster American Thunder 3" exhaust

Added.

Originally Posted by Mantis RS

I plan to be there Thursday night. I don't mind throwing my car in the mix. I'm running a v6 with ARK N-II exhaust (4.5" slant tips) and a Cold Air Inductions CAI.

Originally Posted by John Deere Racer

Do you need a LG motorsports set up?

I have the full exhaust
Best sounding exhaust out ther!!!!

Originally Posted by camaros and vettes

it was my car that they used

You didn't have the knee part of the front of the seat elevated. lol

If you lift it you'll notice a cracking sound as the plastic bends. Won't really mess anything up but could brake the mounting plate.

[GMteSSted]

Can't believe there's not an MBRP system....so I will if still room:
TSP 1 7/8 Coated Headers, No-Cats, MBRP Stainless 3" catback

[PQ]

Yup There is room. Added.

I'll go through and organize it in the days to come.

We'll figure out where we will be in the lot and direct these cars there as they return from the cruise.

[myold88]

Originally Posted by PQ

Yup There is room. Added.

I'll go through and organize it in the days to come.

We'll figure out where we will be in the lot and direct these cars there as they return from the cruise.

If we have the room- How about parked in a big circle: backed in.

[fastfreddie]

Originally Posted by myold88

If we have the room- How about parked in a big circle: backed in.

[IDEALG]

are cammed cars with custom exhaust allowed

[Awesome_SS]

I'll play.
2R Maxx Cam, Stainless Works Headers(Long), Corsa Exhaust

[PQ]

Originally Posted by myold88

If we have the room- How about parked in a big circle: backed in.

I'll get there Wed morning and see what it looks like. With the expected turn out parking might be limited. Maybe not, I'll check it out then.

Originally Posted by IDEALG

are cammed cars with custom exhaust allowed

As long as it could be had by a potential buyer.

Or hell, even if not.

Originally Posted by Awesome_SS

I'll play.
2R Maxx Cam, Stainless Works Headers(Long), Corsa Exhaust

[KnightRiderSS]

I made a landscaped 8x11 with large type that has my set up on it that I can put on my windshield

[luckynuts]

Don't want any part of the great V6 vs V8 debate but if the intent is to help someone plan their mods maybe the V6's and V8's should be parked together? Make it easier for someone to check the set-up that applies to them. Just a thought.............

[RickRay]

I'm in for this....

2LT/RS Auto /Solo HFC/Solo Mach X-LLT J-Pipe/JBA Headers Shorty/CAI -Airaid V2/PowerAid TB Spacer / VMAX TB /