Traction control and Stabilitrak lights on - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Infidel67 · 11-09-2023, 09:33 AM

So after my Buddy and I changed out the lower control arms, trailing arms and adjustable toe rods plus front and rear sway bars, new catback exhaust, I had no lights coming on, everything was fine besides the steering wheel is in the 1 o'clock position while going straight, no vibration or any of the sorts, I got an alignment done on Monday and drove it home now my trac. and stabil. lights and another are coming on soon as I hit 30mph.

Got in touch with them they said they didn't do anything that causes that but it don't change the matter of fact that everything was OK before that?
they might hit a sensor or something I don't know, I asked for the sheet where they did the alignment and checked all wiring...nothing

IKILLEDSUPERMAN_ZL1 · 11-09-2023, 10:22 AM

I had the same issue this week. I was able to scan it and found out which one. I replaced it and got rid of all the lights.

gtstorey · 11-09-2023, 10:28 AM

Probably a problem with a wheel speed sensor. But that looks like a pretty crappy alignment. And next time you get an alignment you might want to use the aggressive street recommended here.
https://www.camaro5.com/forums/showp...4&postcount=13

Infidel67 · 11-09-2023, 12:36 PM

Quote:

Originally Posted by IKILLEDSUPERMAN_ZL1

I had the same issue this week. I was able to scan it and found out which one. I replaced it and got rid of all the lights.

I got no Codes showing, checked it with 2 scanners!

Infidel67 · 11-09-2023, 12:37 PM

Quote:

Originally Posted by gtstorey

Probably a problem with a wheel speed sensor. But that looks like a pretty crappy alignment. And next time you get an alignment you might want to use the aggressive street recommended here.
https://www.camaro5.com/forums/showp...4&postcount=13

Oh Man this is Gold, I really Appreciate it.

gtstorey · 11-09-2023, 12:43 PM

Quote:

Originally Posted by Detleg

I got no Codes showing, checked it with 2 scanners!

What level scanner are you checking it with? Needs to be something that can check all the modules, not just the ECM/P codes. I'm not sure which one stores the wheel speed sensor codes on our cars.

Infidel67 · 11-11-2023, 09:57 AM

Quote:

Originally Posted by gtstorey

What level scanner are you checking it with? Needs to be something that can check all the modules, not just the ECM/P codes. I'm not sure which one stores the wheel speed sensor codes on our cars.

Sorry for the late reply, I use Torque and OBD link
not really a Traditional Scanner.

gtstorey · 11-11-2023, 12:55 PM

You need to check and see what modules those read. I think some of the obd link stuff may read the other modules but some don’t.

Infidel67 · 11-13-2023, 07:53 AM

You know what, it went away just like it started

must be that new exhaust, hell I don't know but I got my appointment set for tomorrow with AX Performance to do the Alignment that you suggested.

Infidel67 · 11-14-2023, 09:17 PM

I just got my Alignment done again, towards the specs gtsorey gave me...the Guys are Pro's (AX Performance) something was wrong with my Lower control arm so the dialed it in as best as the could. see pics.
The best thing is, the just got a Brand New Dyno in they will start doing pretty soon, not one of these fat roller ones but 2 big square blocks that mounts to the wheels. Can't wait.

1JEWLDSSRS · 11-15-2023, 09:23 AM

Quote:

Originally Posted by Infidel67

I just got my Alignment done again, towards the specs gtsorey gave me...the Guys are Pro's (AX Performance) something was wrong with my Lower control arm so the dialed it in as best as the could. see pics.
The best thing is, the just got a Brand New Dyno in they will start doing pretty soon, not one of these fat roller ones but 2 big square blocks that mounts to the wheels. Can't wait.

I believe that's called a "hub dyno"..

Infidel67 · 11-15-2023, 10:19 AM

Quote:

Originally Posted by 1JEWLDSSRS

I believe that's called a "hub dyno"..

Yup, lol. I asked them "Hey who's gonna do the Tuning?" he said they will go to class ..... Oh boy

but they're real smart fellas.
they doing a lot of...cough cough Euro Trash

everyone got their Audi S8

1JEWLDSSRS · 11-15-2023, 03:11 PM

Quote:

Originally Posted by Infidel67

Yup, lol. I asked them "Hey who's gonna do the Tuning?" he said they will go to class ..... Oh boy

but they're real smart fellas.
they doing a lot of...cough cough Euro Trash

everyone got their Audi S8

OK then!! I don't think they will be tuning MY Camaro!! Unless they hired a guy that knows about the LS platform engines and it's characteristics and tuning..

11-09-2023, 09:33 AM	#1
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	Traction control and Stabilitrak lights on So after my Buddy and I changed out the lower control arms, trailing arms and adjustable toe rods plus front and rear sway bars, new catback exhaust, I had no lights coming on, everything was fine besides the steering wheel is in the 1 o'clock position while going straight, no vibration or any of the sorts, I got an alignment done on Monday and drove it home now my trac. and stabil. lights and another are coming on soon as I hit 30mph. Got in touch with them they said they didn't do anything that causes that but it don't change the matter of fact that everything was OK before that? they might hit a sensor or something I don't know, I asked for the sheet where they did the alignment and checked all wiring...nothing Attached Images __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-09-2023, 10:22 AM	#2
IKILLEDSUPERMAN_ZL1 Drives: 2011 Camaro SS Join Date: Jul 2017 Location: Wichita,KS Posts: 603	I had the same issue this week. I was able to scan it and found out which one. I replaced it and got rid of all the lights. __________________ 2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.

11-13-2023, 07:53 AM	#9
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	You know what, it went away just like it started must be that new exhaust, hell I don't know but I got my appointment set for tomorrow with AX Performance to do the Alignment that you suggested. __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-14-2023, 09:17 PM	#10
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	I just got my Alignment done again, towards the specs gtsorey gave me...the Guys are Pro's (AX Performance) something was wrong with my Lower control arm so the dialed it in as best as the could. see pics. The best thing is, the just got a Brand New Dyno in they will start doing pretty soon, not one of these fat roller ones but 2 big square blocks that mounts to the wheels. Can't wait. Attached Images __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-09-2023, 10:28 AM	#3
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,154	Probably a problem with a wheel speed sensor. But that looks like a pretty crappy alignment. And next time you get an alignment you might want to use the aggressive street recommended here. https://www.camaro5.com/forums/showp...4&postcount=13

11-11-2023, 12:55 PM	#8
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,154	You need to check and see what modules those read. I think some of the obd link stuff may read the other modules but some don’t.