No throttle peddle control

[lnsper]

Weird issue
2010 SS 417ci
When I put the car in drive and try to power break the car the gas peddle is dead and wont do any thing. The car will rev up in P R N with the break pushed just fine and it will drive just fine. If I use the line lock it will work fine also. I have tried shutting off tcc and tried pulling fuse 40 and 43 the only thing that seems to work is to unplug the connector on the brake peddle under the dash
Anyone ever have this happen?

[Cristjw]

Do you get both lights on the dash when you turn off TCS? Hold down the TCS button until both lights turn on, about 7 excruciating seconds.

[lnsper]

Cristjw both lights come on and it has no effect

[WEISHAAR37]

Originally Posted by lnsper

Cristjw both lights come on and it has no effect

if the car is tuned then there is a chance your tuner Disabled the Brake TQ Management table where it turns off with the traction control button. this a common mistake i find when retuning cars for customers. if you have a way to read the tune file out of the car and email it to me id be happy to take a look through it.

Ben
Gwatney Performance Innovation