Square Setup Decisions

[hworth18]

Originally Posted by AppleBomb

Who did you purchase you're setup from?

I bought the whole deal (wheels, tires, TPMS, lugs, locks) from Factory Reproductions shipped to my door and ready to put on.

[kcox2010]

Looking to ger new rims one inch lower I have 27540r20 on 20x9 40 offset square stance looking at 20x10 by 35 off set or 20x9 27 off set use the same tires any issue with either rim????

[Car Nation Videos]

You don’t have to reflash the ecu if you put bigger wheels on your Camaro.

[Norm Peterson]

Originally Posted by kcox2010

Looking to ger new rims one inch lower I have 27540r20 on 20x9 40 offset square stance looking at 20x10 by 35 off set or 20x9 27 off set use the same tires any issue with either rim????

Turn-in response will be 'crisper' and steering precision slightly better with the 10" wide wheels.

It's a lateral stiffness thing, not just visual. NVH on 10's rather than 9's may or may not be increased by enough to notice.


Norm

[kcox2010]

Originally Posted by Norm Peterson

Turn-in response will be 'crisper' and steering precision slightly better with the 10" wide wheels.

It's a lateral stiffness thing, not just visual. NVH on 10's rather than 9's may or may not be increased by enough to notice.


Norm

It one inch lowered / just want to make the offset fits and clears rotors on my Ss

[SSammy]

I’ve been running 20x10 +35, 275/40r20 all 4 corners, on BMR 1” drop springs since late 2019. No problem at all. Can’t speak to the 20x9 +27 setup.

[kcox2010]

Originally Posted by SSammy

I’ve been running 20x10 +35, 275/40r20 all 4 corners, on BMR 1” drop springs since late 2019. No problem at all. Can’t speak to the 20x9 +27 setup.

Ty very much I believe 20x9 would fit I just worried about 27 off set and clearing the caliper