09-29-2015, 01:40 PM | #1 |
Drives: 2013 ZL1 Join Date: Oct 2014
Location: Blaine, MN
Posts: 552
|
JDP 850hp Package for your OEM Parts
Not sure if I should post this here or classifieds.. will try here first.
Due to my recent divorce I am being forced to sell my car. Only I want to switch it back to stock first. I do have most if not all the OEM parts, I am just not mechanically inclined nor have the time to do it myself. So I am offering up all my parts (prefer a package deal) to anyone who may want a killer deal and can do the work. I prefer someone within 300 miles on Minneapolis but would be willing to work something out if needed for anyone truly serious. Again, you would get my parts at a great deal and I would need your stock parts for any part I do not already have. You would need to handle the labor. All my parts are flawless and only a few thousand miles on them. Black OEM 10 spoke wheels are also up for grabs. They have the F1s with 6500 miles on em. I am not selling individual parts just yet to see if anyone wants the package deal. Parts list is as follows: Engine\Performance Roto-fab CAI (Carbon fiber dipped) Roto-fab Fuse cover (Carbon fiber dipped) Roto-fab Strut bar (Carbon fiber dipped) Roto-fab Engine cover (Carbon fiber dipped) Roto-fab oil cap (Carbon fiber dipped) Roto-Fab Big Gulp Roto-Fab Windsheld Washer reservoir relocation kit Roto-Fab Misc engine bay pieces (Carbon fiber dipped) Fore 400/400 Dual fuel pump setup D3 Performance heat exchanger D3 Performance SC reservoir Metco 2.50" supercharger pulley with hub and solid isolator Metco 100mm dual bearing supercharger idler pulley JDP Spec 1050 Billet Stage III Positive Displacement 3-bolt camshaft JDP Motorsports 3-bolt cam conversion kit KOOKS 1-7/8" long tube headers (catless) Injector Dynamics ID-1000 injectors VMAX 87mm CNC ported throttle body ATI damper with 10% overdriven pulley and balancer bolt Lingenfelter 160 degree thermostat Goodyear 8-Rib gatorback Belt Yank 2800 Multi Disk TQ Converter Elite Engineering E2 catch can w/Black AN fittings & Black nylon braided line kit Katech C5-R timing chain Brian Tooley Racing LSx .660" lift platinum valve spring kit with titanium retainers Comp Cams LSx trunion Upgrade and trend 1-Piece pushrods GM gaskets and seals - front cover gasket/seal, water pump gaskets, balancer bolt Melling LS series oil pump NGK TR7IX Iridium IX Plugs Exterior CF hood wrap CF bowties CF taillight bezels Tinted side markers Tinted tails Rock guards Spec springs ZL1 valve stem caps Misc Palmer Dashlogic
__________________
|
09-29-2015, 01:56 PM | #2 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
I would be interested in the carbon fiber strut bar and fuse box cover if you decide to part that out. I already have the other stuff. Just pm me and let me know how much when you do. Thanks
Last edited by Bigtime53; 09-29-2015 at 01:56 PM. Reason: add |
09-29-2015, 03:28 PM | #3 |
Drives: 2012 ZL1 Join Date: Feb 2014
Location: Tracy, CA
Posts: 533
|
I'd be interested in the CAI but I don't want to get rid of my stock stuff...
__________________
Current car: 2012 ZL1 - "Venom" - *RIP*
Previous car: 2011 2SS - "NCC-1701-A" Previous car: 2010 2SS - "NCC-1701" (Stolen & Stripped)*RIP* |
09-29-2015, 04:33 PM | #4 |
Drives: 2013 ZL1 Convertible Join Date: Oct 2013
Location: Valrico, FL
Posts: 515
|
I'd be interested in all the parts that make up the E85 conversion (injectors, fuel pump, controller, lines etc.) Shoot me a PM of the parts and pricing please.
__________________
2013 ZL1 Auto Convertible - BRM
Best: 10.829@127.15 FI Interchiller, Roto-Fab CAI, Big Gulp & Res, 9.1/2.5 Pulleys, PB&S, DeatschWerks 1500cc, Fore triple pump, Pfadt LT's, RD HX, MT DR's New times to come with E85 2016 2SS Auto - Hyper Blue Metallic Roto-Fab CAI Last edited by 97ChameleonTA; 09-29-2015 at 04:46 PM. |
09-29-2015, 04:44 PM | #5 |
Drives: 2013 ZL1 Join Date: Jan 2015
Location: Orlando
Posts: 936
|
I might be interested. How much do you want for it? PM or post please
__________________
2013 A6 ZL1
|
09-29-2015, 05:44 PM | #6 |
Drives: ZL-1 Join Date: Oct 2014
Location: dallas
Posts: 2
|
I would be interested in the KOOKS 1-7/8" headers, both Metco pulleys, belt, Roto-Fab Big Gulp and Roto-Fab w/w reservoir relocation kit. PM me pricing and picture please.
|
09-29-2015, 06:58 PM | #7 |
Drives: '12 Camaro ZL1, '16 Silverado Z71 Join Date: Mar 2012
Location: Blaine, MN
Posts: 846
|
Tough break man.
I don't need all the parts, but may be interested in the package for the right price. PM me what you're thinking. GLWS - tough time to sell in MN... |
09-29-2015, 07:09 PM | #8 |
Drives: 2013 ZL1 Join Date: Oct 2014
Location: Blaine, MN
Posts: 552
|
Thx guys. Replied to PMs. I would also be interested in selling the car as is if the offer was right. I still need to do some research and determine a price though if I went that route.
__________________
|
09-29-2015, 07:53 PM | #9 |
Z-BEAST
Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013
Location: Oregon City, OR
Posts: 1,470
|
That really blows buddy!
|
09-30-2015, 10:48 AM | #10 |
Drives: 19 Z06 Join Date: Nov 2011
Location: Oakville Ont.
Posts: 1,427
|
I feel for you, too bad you gotta do this
__________________
Gone but not forgotten:
1974 Corvette Stingray 454 1986 Z28 2009 Mustang GT convertible 2012 45th 2SS Vert 2013 ZL1 M6 2014 Zl1 M6 2014 GT500 2016 Challenger Hellcat M6 www.youtube.com/c/garageking |
09-30-2015, 01:09 PM | #11 |
Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2014
Location: Mitchell, SD
Posts: 115
|
Interested in the Black OEM 10 spoke wheels. PM me!!
|
10-05-2015, 09:40 PM | #12 |
Drives: 2013 ZL1 A6 Join Date: Oct 2014
Location: Midland, Texas
Posts: 19
|
"Black OEM 10 spoke wheels are also up for grabs. They have the F1s with 6500 miles on em"
Interested. Please send PM. -Travis |
10-06-2015, 01:26 PM | #13 |
Drives: 2013 Camaro ZL1- Silver Ice Join Date: Aug 2013
Location: Springfield IL
Posts: 86
|
Big Gulp and WW bottle relocation kit if you end up parting out... Sorry for the conditions...
|
|
|
|
|