Intake manifold

[13SSCamaro]

Originally Posted by 1JEWLDSSRS

Hey there, no track times yet as I wanted to put a few thousand miles on the build before I took her over to the track, but also it has been extremely hot over here and my track is in Orlando and it's hotter over there. But cooler weather is coming in the next couple of weeks so I plan on going over. I want to see if the car will run the low 11's like he said it would, just need to get a good 60ft time he said. The car is really quick and she gets it done really fast. She ran 12.68 with just the CAI, ported TB, LT's exhaust and tune at 365rwhp, and now I'm at 460rwhp with the cam and supporting mods. We'll see. And that 12.68 was on street tires.

I feel ya with that heat and humidity. I am down in St Lucie county, are you north or south of Orlando? Weather is supposed to get down to the 60's next week. I am thinking about trying my new set up at PBIR to see what it does.

[1JEWLDSSRS]

Originally Posted by 13SSCamaro

I feel ya with that heat and humidity. I am down in St Lucie county, are you north or south of Orlando? Weather is supposed to get down to the 60's next week. I am thinking about trying my new set up at PBIR to see what it does.

Hey there, I am 65 miles SE of Orlando on the east coast. Yea the shop that did my build is down there, Lashway Motorsports, Erik and his team did a great job for me! They just had a track rental day at PBIR and I was going to try to go, but just couldn't see 250 bucks to run all day, plus it was hot and didn't want to go. Had 2 car shows that weekend.

[1JEWLDSSRS]

Originally Posted by christianchevell

12.7 is about stock time BTW, so don't expect miracles. Long runners good for higher HP and shorter if done right build torque also, metal is what it is can heat soak but so can plastic …. Tires and a cam will of course lower your ET if you drive right.... and don't do one of a thousand things wrong like Bawk, Choke, Wheel hop the axle to death, Jump, etc....lol go in with the engine all hot and not ice the intake etc....theres a lot to drag racing right and that's why fun shows like the guys of the 405 on street outlaws are on showing the dialing in the suspension over and over the tuning of the car over and over, the replacing of the springs over and over...lol


I have been subscribed to hearing about the LOD intake since they first showed it and waited all through the Vararam debacle with their never made curved long runner they never made they supposedly had trouble getting a trade mark /patent for...while they could make the ones for COPO's etc.....

Said at one time to make them ls7 head capable maybe for the LOD alterations, good to see they are making different alterations for the design as they may be one of the only new things for real besides crappy no design sheet metal types that are devoid of real research much out there for cheap and do make it hard with the firewall...…..

As always talk is cheap...… GOOD LUCK and if nothing else it builds mass HP and looks great doing it....and the engine is more healthy for it making its torque that moves you.

And you have to take into account the corrections for the weather when it comes to ET... And heat sucks power big time and limits the engine big time ….. Give me colder denser air anytime......

Here ya go sir.

2SS RS Convertible6.2L V8RWD6M4.7 sec13.2 sec @ 109.5 mph16/24/---- mpgMotor Trend2SS RS Convertible6.2L V8RWD6M4.9 sec13.2 sec @ 109.2 mph16/24/---- mpgMotor Trend2SS RS Convertible6.2L V8RWD6M5.0 sec13.4 sec @ 109 mph16/24/20 mpgMotor Week2SS RS Convertible6.2L V8RWD6M4.8 sec13.1 sec @ 109.3 mph16/24/16.7 mpgRoad & TrackLS Coupe3.6L V6RWD6A6.1 sec14.5 sec @ 98.2 mph18/29/18.5 mpgMotor TrendSLP ZL1 Coupe7.0L Supercharger V8RWD6M3.2 sec11.1 sec @ 129 mph----/----/---- mpgMotor Week2010 Chevrolet Camaro

[christianchevell]

https://www.zeroto60times.com/

12.7 is about stock here at Woodburn race track but its just above sea level, some days nice and cooler also being Oregon.....
times vary according to mods and conditions so much....
2010 Callaway Camaro SC552
Compare Car
0-60 mph 3.9 | Quarter mile 12.0

2010 Chevrolet Camaro V6 (Manual)
0-60 mph 5.8 | Quarter mile 14.4

2010 Chevrolet Camaro SLP ZL575
0-60 mph 3.7 | Quarter mile 11.6

2010 Chevrolet Camaro SS
Compare Car
0-60 mph 4.6 | Quarter mile 13.0

2010 Hennessey Chevrolet Camaro HPE700
Compare Car
0-60 mph 3.5 | Quarter mile 11.2

2010 Chevrolet Camaro V6
Compare Car
0-60 mph 6.0 | Quarter mile 14.6

2010 Chevrolet Camaro Hurst Performance Series 4
0-60 mph 4.1 | Quarter mile 12.3

2010 Chevrolet Camaro SS (Lingenfelter)
Compare Car
0-60 mph 3.9 | Quarter mile 12.2

2011 Chevrolet Camaro SLP ZL1
Compare Car
0-60 mph 3.1 | Quarter mile 11.0

2011 Chevrolet Camaro SS
Compare Car
0-60 mph 4.6 | Quarter mile 13.1

2011 Chevrolet Camaro SS Convertible
Compare Car
0-60 mph 4.8 | Quarter mile 13.2

2012 SLP Chevrolet Camaro Convertible ZL1
0-60 mph 4.1 | Quarter mile 12.1

2012 Chevrolet Camaro ZL1
Compare Car
0-60 mph 3.9 | Quarter mile 12.1

2013 Chevrolet Camaro SS
Compare Car
0-60 mph 4.4 | Quarter mile 12.8

2013 Chevrolet Camaro Convertible SS
Compare Car
0-60 mph 4.5 | Quarter mile 13.0

2013 Chevrolet Camaro Convertible ZL1
Compare Car
0-60 mph 4.0 | Quarter mile 12.3

2013 Chevrolet Camaro Hot Wheels Edition
Compare Car
0-60 mph 4.4 | Quarter mile 12.7

2014 Chevrolet Camaro ZL1
Compare Car
0-60 mph 3.9 | Quarter mile 12.2

2014 Callaway Camaro SC562
Compare Car
0-60 mph 4.1 | Quarter mile 12.2

2014 Callaway Camaro SC582
Compare Car
0-60 mph 3.9 | Quarter mile 11.9

2014 Callaway Camaro SC652
Compare Car
0-60 mph 3.7 | Quarter mile 11.5

2014 Chevrolet Camaro Z28
Compare Car
0-60 mph 4.0 | Quarter mile 12.3

2015 Chevrolet Camaro SS 1LE
Compare Car
0-60 mph 4.3 | Quarter mile 12.7

2016 Chevrolet Camaro SS
Compare Car
0-60 mph 3.9 | Quarter mile 12.3

2016 Chevrolet Camaro SS (Manual)
Compare Car
0-60 mph 4.0 | Quarter mile 12.4

2016 Chevrolet Camaro V6
Compare Car
0-60 mph 5.2 | Quarter mile 13.8

2016 Chevrolet Camaro 2.0T
Compare Car
0-60 mph 5.3 | Quarter mile 14.0

2016 Chevrolet Camaro SS Convertible (Manual)
Compare Car
0-60 mph 4.1 | Quarter mile 12.5

2016 Chevrolet Camaro SS Convertible
Compare Car
0-60 mph 4.0 | Quarter mile 12.4

2016 Chevrolet Camaro ZL1
Compare Car
0-60 mph 3.4 | Quarter mile 11.4

2017 Chevrolet Camaro V6 (Manual)
Compare Car
0-60 mph 5.0 | Quarter mile 13.7

2017 Chevrolet Camaro ZL1 Convertible
Compare Car
0-60 mph 3.5 | Quarter mile 11.6

2018 Chevrolet Camaro ZL1 1LE (Manual)
Compare Car
0-60 mph 3.5 | Quarter mile 11.7

2018 Chevrolet Camaro SS Coupe (Manual)
Compare Car
0-60 mph 4.0 | Quarter mile 12.4



So this is fairly accurate with some modified in the mix and if copied from the site things don't align right...... But has always been kind of the standard site for good times and matches what with fairly good air and altitude the Camaro should perform too...…. Heat kills...…….
2019 Chevrolet Camaro
0-60 To Be Released
Chevrolet Caprice 0 to 60 MPH and Quarter Mile Times

[1JEWLDSSRS]

Well guys, back to what this thread was supposed to be all about, the LOD Speedworks X1 intake, I made my purchase and just have to wait til they get one in the raw aluminum finish, unpainted. I plan on having it paint matched to my RJT car color, my paint guy does really great work and has painted a couple whipple's and Maggies and they look great. Sooooo just gotta wait now, patiently. And that's going to be tough. lol. Stay tuned, more to come. Thanks LOD !!

[lazerlemonta]

Originally Posted by 1JEWLDSSRS

Well guys, back to what this thread was supposed to be all about, the LOD Speedworks X1 intake, I made my purchase and just have to wait til they get one in the raw aluminum finish, unpainted. I plan on having it paint matched to my RJT car color, my paint guy does really great work and has painted a couple whipple's and Maggies and they look great. Sooooo just gotta wait now, patiently. And that's going to be tough. lol. Stay tuned, more to come. Thanks LOD !!

Congrats!!! That is going to be a nice looking intake. I’d like to see the lod speedworks highlighted with an alternate color you have working in the scheme. I got a red one coming I’m debating to let it show through the hood and seal it up or just build a cowl over it...... but the red with my jet stream blue is screaming for 2 white pin stripes to make it patriotic. I’ll have to see how this all plays out myself. 11/6 is coming up quick!

[christianchevell]

Yup I liked the red one also.....

[ZEN357]

The intake sitting on top of your engine in whatever you own, Camaro or Vette would look intimidating as H311!!!!! LOL!!!!

[1JEWLDSSRS]

Originally Posted by lazerlemonta

Congrats!!! That is going to be a nice looking intake. I’d like to see the lod speedworks highlighted with an alternate color you have working in the scheme. I got a red one coming I’m debating to let it show through the hood and seal it up or just build a cowl over it...... but the red with my jet stream blue is screaming for 2 white pin stripes to make it patriotic. I’ll have to see how this all plays out myself. 11/6 is coming up quick!

Thanks! Yea I think it is going to look nice too. It is going to be RJT, the main body, and the lettering is going to be silver ice metallic to go with the polished billet items I have and mirrored stainless. The runners are also going to be silver ice metallic as well, or gloss black. Maybe the entire intake just RJT except the lettering, silver ice. Got plenty of time to think about what I want.

[mrimpala02]

Surprised I haven't seen one of these in a boosted application yet. I met with Raf last year, great guy, and seriously thought about pulling the trigger. But I ended up spending my annual mod budget on upgrading my fuel system and suspension.

Not sure I can afford much more gains on my TT SBE before I blowing it up LOL!. But once I pull the trigger to build my iron 427 I will definitely put one of these on it.

Wondering if there's an advantage going with cathedral ports over the square ports heads?

[1JEWLDSSRS]

Originally Posted by ZEN357

The intake sitting on top of your engine in whatever you own, Camaro or Vette would look intimidating as H311!!!!! LOL!!!!

OH YEA !! lol, that's another reason I bought it, the WOW factor, no body around here has anything like it and most folks are afraid to mod their Camaros! My car gets a lot of attention at the shows as it is, so this intake will really make them ask, is that stock ?

[l.o.d_yankee]

Originally Posted by 1JEWLDSSRS

OH YEA !! lol, that's another reason I bought it, the WOW factor, no body around here has anything like it and most folks are afraid to mod their Camaros! My car gets a lot of attention at the shows as it is, so this intake will really make them ask, is that stock ?

Nope it just fits that well

[1JEWLDSSRS]

Originally Posted by l.o.d_yankee

Nope it just fits that well

lol yes sir!! Can't wait to get this baby on my engine !! Every time I stop somewhere people come over and ask about the car, the sound of the Outlaw exhaust and the big ass cam I'm running and just the awesome way it looks! Then I pop the hood because they ask about the engine, they flip out when they see it and all the custom stuff! Crazy. Just wait til I have the intake on there, they will really freak out! It's just what they do when the see something awesome! And nobody has one yet..

[lazerlemonta]

LOOK WHAT JUST SHOWED UP TODAY!!! We have our work "
cut out" for us this weekend. I am off work Friday through Wednesday. Heading up Friday to get this beast fitted and cut my hood and hopefully do some street tuning. I am going to try and get on a dyno Monday but that is still up in the air. Lets hope all goes well and mother nature cooperates for 11/6!!!!