07-14-2015, 04:56 AM | #1 |
|
Need air bag help ASAP.
I have a 2014 camaro ss. I ordered new racing seats and well they don't have air bags in them. How do I keep the air bag light off when I remove my factory seats?
If I need to order something where can I get it? If I can jump wires with a resistor what size/type of resistor and what wires? Pictures would be great
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
07-14-2015, 06:01 AM | #2 |
I.AM.
Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008
Location: NY
Posts: 2,638
|
I dont think the car will even start when those wire harnesses are unplugged, so you'll need to jump them somehow.
__________________
NY5thgen.com
|
07-14-2015, 10:19 AM | #4 |
|
I don't see anything on that site.
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
07-14-2015, 10:42 AM | #5 | |
Drives: 2010 Camaro LS-M6 67 Chevelle Wgn Join Date: May 2009
Location: .
Posts: 1,509
|
Quote:
http://www.camaro5.com/forums/showthread.php?t=277732
__________________
Free Trade is not Fair Trade
I am, we are INDIVISIBLE Invictus, By William Ernest Henley |
|
07-14-2015, 10:57 AM | #6 |
Drives: 2013 Camaro Dusk 2SS/6 Join Date: Sep 2013
Location: New Jersey
Posts: 1,586
|
the side seat airbag firing circuits are 2 wires. to turn off the light you need to bridge these wires with a 2 ohm resistor. DO SO AT YOUR OWN RISK.
|
07-14-2015, 11:12 AM | #7 |
Drives: 2013 1SS 1LE Black - Std Exhaust Join Date: Mar 2013
Location: Brunswick, GA
Posts: 3,622
|
So are the only air bag system compatible racing seats the stock Recaros?
|
07-14-2015, 05:29 PM | #8 |
Drives: 2015 Camaro SS Join Date: Jan 2015
Location: Seattle, WA
Posts: 191
|
That's not true, at least on my 2015 Camaro SS. There will just be a light on the dash and warning message.
__________________
|
07-14-2015, 06:16 PM | #9 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Just a heads up on switching up the seats. I read on another thread that the passenger side airbag is activated when the sensor inside the seat bottom is activated, usually when someone sits on it (I know that's how it is on my Silverado, not 100% sure on the camaro). If you jump the airbag sensor on the passenger side, that airbag is always going to be off so if you have a passenger and you get in an accident, the airbag on the passenger side will never deploy. Just another thing to think about. If your just replacing the driver's seat then no issues there.
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
07-15-2015, 02:42 AM | #10 |
|
I don't care about the passenger air bag. I just want the light and messages off.
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
07-15-2015, 06:25 AM | #11 |
I.AM.
Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008
Location: NY
Posts: 2,638
|
Weird, it must jave changed from the "older" ones.
__________________
NY5thgen.com
|
07-15-2015, 08:03 AM | #12 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
In that case, you're good to go with the driver's side. What seats did you buy? Make sure to post some pics when you have them installed.
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
07-17-2015, 11:56 AM | #13 |
|
I can't install them untill i figure out this air bag light.
__________________
MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs.
https://www.instagram.com/whoopa_ss/ |
07-17-2015, 04:54 PM | #14 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
The problem you'll have if you don't remove the fault, is none of the air bags will go off. So if you drive on the street, not a good idea. I was unlucky enough to pop my side curtains a few years ago. It is surprising how little information there is on this topic. I don't know if people just don't know, or not willing to share because of liability. Google for air bag simulators. Somebody made a device to fool the SIR/SDM in thinking the air bags were still in place. I've yet to hear whether that worked on the 5thG Camaro though.
__________________
|
|
|
|
|