Fs on3 turbo kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

supergt99 · 08-18-2015, 08:44 AM

Has 3000 miles on it. Upgraded to 7875 turbo. Selling turbo kit only no fuel system.(will include snow meth kit)Kit is still on car can hear run if your in the area. Asking 2000+ shipping. Also looking for lt headers with mid pipe. Cam kit. Decided to go motor only before I break it.

mkent · 08-19-2015, 10:06 AM

What is the manufacture and size of the turbos? Does this require stock LS3 manifolds and down pipes or is that all included? Sorry, I don't know much about this kit.

supergt99 · 08-19-2015, 09:34 PM

Will be easier to link to the site . It's this kit but with their 78mm turbo. Need passenger side manifold stock. http://www.on3performance.com/shop/2...-turbo-system/

supergt99 · 08-21-2015, 11:22 AM

CamaroCracka · 08-21-2015, 01:53 PM

How much boost did it generate on your car?

Is that the turbo with the 76mm exhaust wheel?

supergt99 · 08-21-2015, 10:17 PM

Yea 76mm wheel. I had it set to 11 but was dropping to 8. I installed eboost street and since then it's been a solid 10 psi.

mkent · 08-23-2015, 10:45 AM

Quote:

Originally Posted by supergt99

Will be easier to link to the site . It's this kit but with their 78mm turbo. Need passenger side manifold stock. http://www.on3performance.com/shop/2...-turbo-system/

Ah, I missed that it was a single turbo. I have a 427 in my 5th gen and will need more than 1 turbo to keep compressor efficiency up. It looks like a nice single kit. I saw On3's Mustang at the track a few years ago and it was quite impressive to say the least, so while their kits may be entry level pricing, it looks like a smart and effective way of getting the job done.

supergt99 · 08-23-2015, 08:40 PM

Sold

08-18-2015, 08:44 AM	#1
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	Fs on3 turbo kit Has 3000 miles on it. Upgraded to 7875 turbo. Selling turbo kit only no fuel system.(will include snow meth kit)Kit is still on car can hear run if your in the area. Asking 2000+ shipping. Also looking for lt headers with mid pipe. Cam kit. Decided to go motor only before I break it.

08-21-2015, 01:53 PM	#5
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,736	How much boost did it generate on your car? Is that the turbo with the 76mm exhaust wheel? __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

08-19-2015, 10:06 AM	#2
mkent Drives: 2010 Camaro SS Join Date: May 2013 Location: Rochester Hills, MI Posts: 9	What is the manufacture and size of the turbos? Does this require stock LS3 manifolds and down pipes or is that all included? Sorry, I don't know much about this kit.

08-19-2015, 09:34 PM	#3
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	Will be easier to link to the site . It's this kit but with their 78mm turbo. Need passenger side manifold stock. http://www.on3performance.com/shop/2...-turbo-system/

08-21-2015, 11:22 AM	#4
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288

08-21-2015, 10:17 PM	#6
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	Yea 76mm wheel. I had it set to 11 but was dropping to 8. I installed eboost street and since then it's been a solid 10 psi.

08-23-2015, 08:40 PM	#8
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	Sold