What RPM does the TVS 1900 spin at for the ZL1? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KaBoom1701 · 01-16-2016, 07:24 PM

Quote:

Originally Posted by EvilZL1

Thanks everyone I noticed it does kick in but will not be heard until higher rpms and speeds. I hate that its so quiet

RotoFab CAI will solve that issue

Emvici · 01-17-2016, 10:27 AM

23000 is the max number you want to avoid going over. I have a 2.55 upper pulley only, and I am getting 15 lbs of boost. There is a thread on this forum that speaks about adjusting the butterfly that controls the boost blow-by. Before I did the adjustment for the butterfly, I only had about 12 lbs of boost. It only took me around 10 minutes to do the adjustment myself. I saw an amazing power gain. My point is who really needs to spin the supercharger faster, when you can get 15 lbs of boost through a simple adjustment and a moderate pulley?. Don't risk damaging your supercharger, find the thread I am talking about and get the free boost that you are losing from the poor factory setting.

mrvenicess · 01-18-2016, 06:42 AM

I spin my blower over 26,000 rpm!

jessrayo · 01-18-2016, 09:40 AM

Quote:

Originally Posted by mrvenicess

I spin my blower over 26,000 rpm!

The 1.9 is an amazing little blower! You can't do this with the 2.3's. Forget trying to spin a whipple or Ken Bell that fast.

EvilZL1 · 01-19-2016, 01:08 AM

I was thinking about buying the adjustment tool. Cant imagine what what extra boost feel like

ZL1Kid_AL · 01-19-2016, 03:04 PM

I was not aware of a tool being out there. Post a link?

HDRDTD · 01-19-2016, 03:52 PM

Quote:

Originally Posted by ZL1Kid_AL

I was not aware of a tool being out there. Post a link?

Lingenfelter sells it for $12.95:

http://www.lingenfelter.com/mm5/merc...8#.VP3IiSI5BhE

ABADZL1 · 01-20-2016, 12:33 AM

Quote:

Originally Posted by EvilZL1

When does the supercharger kick in for you guys? Is it instant or at a certain RPM range? Im noticing hellcats and whipple superchargers seem to kick in instant they hit the pedal. I dont notice my supercharger whine and kicking in until 3-4 gear. During rolls, It doesnt kick in instantly it seems to be only once a certain RPM is reached

I will look at your tune and see if your power enrichment delay was tweaked

EvilZL1 · 01-20-2016, 12:35 AM

Quote:

Originally Posted by ABADZL1

I will look at your tune and see if your power enrichment delay was tweaked

No it's not its on there. I guess because I'm never able to hear it or pay attention to the gauges I couldn't tell. I would hear it whine late in videos but recently I put my GoPro on the hood and recorded take offs of just light acceleration and heard it and watched the gauges.

Sent from Wayne's Manor

ABADZL1 · 01-20-2016, 12:39 AM

No its not its n there? What that mean?

Sent from my C811 4G using Tapatalk

01-19-2016, 01:08 AM	#33
EvilZL1 Snake Eater Drives: 2012 AGM ZL1 Join Date: Oct 2011 Location: TN Posts: 2,737	I was thinking about buying the adjustment tool. Cant imagine what what extra boost feel like __________________ Build Thread: http://www.camaro5.com/forums/showth...95#post8351295 Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/

01-19-2016, 03:04 PM	#34
ZL1Kid_AL Drives: 2014 ZL1- Summit White M6 Join Date: Aug 2014 Location: Thornton, Colorado Posts: 462	I was not aware of a tool being out there. Post a link? __________________ 750whp @ 13psi Garage Built on Jack Stands.. 850++ 100 shot of sauce

01-20-2016, 12:39 AM	#38
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,670 View My Garage	No its not its n there? What that mean? Sent from my C811 4G using Tapatalk __________________ GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs

01-17-2016, 10:27 AM	#30
Emvici Drives: 2014 ZL1 White Convertible Join Date: Aug 2013 Location: St Pete Fl Posts: 682	23000 is the max number you want to avoid going over. I have a 2.55 upper pulley only, and I am getting 15 lbs of boost. There is a thread on this forum that speaks about adjusting the butterfly that controls the boost blow-by. Before I did the adjustment for the butterfly, I only had about 12 lbs of boost. It only took me around 10 minutes to do the adjustment myself. I saw an amazing power gain. My point is who really needs to spin the supercharger faster, when you can get 15 lbs of boost through a simple adjustment and a moderate pulley?. Don't risk damaging your supercharger, find the thread I am talking about and get the free boost that you are losing from the poor factory setting.

01-18-2016, 06:42 AM	#31
mrvenicess Drives: 2013 CRT ZL1 auto Join Date: May 2010 Location: Venice Fl Posts: 1,443 View My Garage	I spin my blower over 26,000 rpm!