You are browsing camaro5 
 |
|
06-19-2015, 06:09 AM
|
#1 |
 
Drives: 2013 Camaro SS 1LE Join Date: Oct 2014
Location: earth
Posts: 288
|
Eboost street rpm signal
Where do I get the rpm signal for eboost street controller? Thanks
|
|
|
|
06-22-2015, 08:56 AM
|
#2 |
|
Drives: 2013 Camaro SS 1LE Join Date: Oct 2014
Location: earth
Posts: 288
|
I'm going to start install later today. Does anyone know? Or do I need tach adapter?
|
|
|
|
|
06-23-2015, 06:55 AM
|
#3 |
   Drives: it changes Join Date: Nov 2010
Location: Norn Iron
Posts: 1,126
|
What do the instructions say ?
If there is no wire from the ecu to dash for the rev counter, then any 1 of the ignition coil trigger wires from ecu to each coil should work fine, but the first option would be best ( if dash receives all it's info via CAN then there will be no such wire ) |
|
|
|
|
06-23-2015, 11:31 AM
|
#4 |
Drives: 09 G8 GT Join Date: Jun 2011
Location: New Castle, Delaware
Posts: 127
|
You'll need an AutoMeter tach adapter, part#9117. They also make a plug and play LS coil harness, part#2189. Let me know if you need them, I can get them cheap.
|
|
|
|
|
02-16-2016, 03:33 PM
|
#5 |
 Drives: Camaro Join Date: Sep 2011
Location: San Juan
Posts: 25
|
What about getting the data from pin 48 C1??
|
|
|
|
|
|
|
|
 |
|
|
