09-13-2016, 06:58 AM | #1 |
Drives: 2013 Camaro SS 1LE Join Date: Oct 2014
Location: earth
Posts: 288
|
Meth injection with LSA supercharger
Im thinking about adding meth to my lsa conversion. im seeing 12psi with my 2.5 pulley @14* timing and thankfully no knock on 93 octane yet. but i would like the added octane/safety from using meth. ive done some searching around the web and it seems that spraying pre blower will ruin the rotors. or so they say. but i never found any actual evidence of this happening. so for you guys spraying pre blower, how long have you done it this way? any damage to blower?
also i tried to find setups after blower but couldnt find anything. does someone make the spacer for the lid that i can use to spray meth? |
09-13-2016, 07:24 AM | #2 |
Drives: 2013 ZL1 Join Date: Jan 2015
Location: Orlando
Posts: 936
|
While methonal is corrosive it should not be sitting on your rotors. Inject it at the elbow pre throttle body like has been done for years.
__________________
2013 A6 ZL1
|
09-15-2016, 08:10 AM | #3 |
Drives: 2011 Camaro SS2RS, 1970 Camaro SS Join Date: Aug 2015
Location: Milwaukee, WI
Posts: 168
|
Let me know what you decide. I'm at the exact same spot as you. Meth is the next step for me as well
Sent from my SM-G935R4 using Tapatalk |
10-06-2016, 10:01 AM | #4 |
Drives: 2013 Camaro SS 1LE Join Date: Oct 2014
Location: earth
Posts: 288
|
got this setup done,ill try to post pics later. it was a DIY setup from another post on this board. but i ended up changing out the nozzle to snow 625ml instead of the mc master carr. didnt like mist size. boost went from 12 to 13psi. i pulled 4% fuel and still a little rich. at 16* timing. dont think i want to go any further on it. its plenty on the street. mix is 50/50.
|
|
|
|
|