You are browsing camaro5 
 |
|
06-21-2013, 01:44 AM
|
#1 |
 
|
Tell me where this part goes.
Took my bumper off to rewire my fog lights, and while putting the bumper back on I found these pieces that I don't know where they go.
There's two of them. I looked online and i'm confused where they go exactly. Hopefully I don't have to take my bumper off again. Any help is appreciated. The part is #8 in the diagram
__________________
|
|
|
|
06-21-2013, 01:53 AM
|
#2 |
      
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
They are shims for he front edge of your facia. The edge that is under the hood and held on with push pins. Dont know which ones need them on your car. Usually I take note of them as I remove the facia. My wifes car has one to four depending on which pin. Mine has none. If it looks good then I wouldnt sweat it. If you decide to put them on all you need to do is remove the desired pin and put it between metal frame and plastic facia. Then reintall push pin.
|
|
|
|
|
06-21-2013, 01:55 AM
|
#3 |
|
ROAD COURSE JUNKIE
|
Yup what mp5 said. I took note of where mine were and put them back accordingly.
__________________
 |
|
|
|
|
06-21-2013, 05:27 PM
|
#4 |
|
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
Oh my. I made the mistake of not counting and taping shims together taking the front end off a car once. Once
I took the front end off four or five times that weekend. Good luck
__________________
 |
|
|
|
|
|
|
|
 |
| Tags |
| bumper, diy |
|
|
