12-22-2018, 11:07 PM | #1 |
Drives: Red 2010 SS Join Date: Dec 2018
Location: Harrison Arkansas
Posts: 5
|
Color code placement for upstream O2 sensor connector
Hey guys i need some help here, i bought a 2010 camaro from a kid who was bracket racing it at our local track in Springfield Misouri. Brought it home and found a bunch of issues. Got most worked out but when i drove 500 miles round trip to KC for a dyno tune I found out my 2 front/ upstream O2 sensors didnt work. Got hom and found out they were not on the car. Somone cut off the pigtails/connectors from the harness and was running the rears only. The car has 1 7/8 headers, cam, cold air and all the supporting mods......supposedly. Big question is does any one have the color code pin placement for the pig tails. I found the 4 wires for each side taped off but dont know the pin placement for the new pigtails........any help would be appreciated.
|
12-23-2018, 12:43 AM | #2 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
hope this helps
Blue wire to pin-B White wire to pin-A Black wires to pins-D,E |
12-23-2018, 01:27 AM | #3 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
found this while looking to solve my own o2 sensor issues https://www.camaro5.com/forums/showthread.php?t=256493
|
12-23-2018, 10:08 AM | #4 |
Drives: Red 2010 SS Join Date: Dec 2018
Location: Harrison Arkansas
Posts: 5
|
codiath, the picture of the pigtail you posted is from the actual O2 sensor i believe. I need pics of the engine harness side. I also found the link you posted for the harness but cant find the same for the bank 2 sensor 1 side. Thanks for your help. If by chance you have pictures of your pig tails in the engine compartment bnak 1 sensor 1 and bank 2 sensor 1 from the back side where i can see the colors that would be a big help. Thanks again.
|
12-23-2018, 11:17 PM | #5 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
I hope you were able to get your issue all sorted out, but if not here is what I found using my car as reference. Bank 1 sensor 1 is driver side pre cat if I am correct, and bank 2 sensor 1 is passenger side pre cat. I might have missed a tracer but this should be enough info to get you wired up. I appears the only difference, side to side, is there is a grey wire in pin E on B1S1 and it is a green in pin E on B2S1.
bank 1 sensor 1 tan-pin A purple/white-pin B pink/black-pin D grey-pin E bank 2 sensor 1 tan-pin A purple-pin B pink/black-pin D green-pin E Last edited by Codiath; 12-23-2018 at 11:21 PM. Reason: formatting |
12-24-2018, 12:40 AM | #6 |
Drives: Red 2010 SS Join Date: Dec 2018
Location: Harrison Arkansas
Posts: 5
|
Perfect, thanks you, your b2s1 wires are the same as mine but the b1s1 i have a light green/wh for pin e. Im hoping the difference in color code is the year, mine is a 2010.
|
12-24-2018, 12:41 AM | #7 |
Drives: Red 2010 SS Join Date: Dec 2018
Location: Harrison Arkansas
Posts: 5
|
Looks like i'll be doing some soldering on Christmas Eve!! Thanks again
|
12-24-2018, 12:47 AM | #8 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
No problem, have fun and good luck. Merry Christmas eve.
|
12-24-2018, 12:54 AM | #9 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
Pics just for further clarification
B1S1 B2S1
|
12-24-2018, 01:36 PM | #10 |
Drives: Red 2010 SS Join Date: Dec 2018
Location: Harrison Arkansas
Posts: 5
|
Thanksagain for the pics, those are exactly what i was needing.
|
|
|
|
|