08-17-2018, 11:44 AM | #29 |
Drives: 2010 SS/RS LS3 M6 Join Date: Apr 2011
Location: Kansas
Posts: 693
|
Are you running stock front tires or 17" skinnies, if skinnies pulling through the box is ok, if stock tires you could be carrying water from the fronts and wetting the track some and your rears are picking it up on your launch.
|
09-12-2018, 08:23 PM | #30 |
Ponies are for girls
|
I just recently got a 2015 RS. Only mod i can see is exhaust, because pipes are all mandrel bends. Not sure GM did that. And it's loud for an LFX V6.
I'm going to be taking it to the track Friday. I live in Tucson where it's over 100* everyday, and running Good Year Eagle Sport tires on 20" rims. My question: Should I still look to do a burn out, or due to the heat will tires and track be sticky enough? *Last time I was at a track, I was racing a 2004 Grand Prix in Seattle.
__________________
H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro
|
09-12-2018, 08:26 PM | #31 |
Drives: 2012 ZL1 Join Date: Jul 2017
Location: Southeast Minnesota
Posts: 118
|
If you aren't on drag radials go around the water box and just chirp the tires to clean them off.
__________________
~ 2012 ZL1 - DynaTech 1 7/8" Headers - ID 1050 Injectors - E85 - DSX Aux Pump -
22.5% Crank Pulley - Roto-Fab CAI w/ Big Gulp- CJ/Jannetty Tuned ~ PB ET 10.54 |
09-12-2018, 08:27 PM | #32 |
Ponies are for girls
|
thanks.
__________________
H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro
|
09-12-2018, 08:27 PM | #33 |
Drives: 2012 ZL1 Join Date: Jul 2017
Location: Southeast Minnesota
Posts: 118
|
Also, my issue was that my tires were bad already. Replaced them and I'm at 1.5x 60s.
__________________
~ 2012 ZL1 - DynaTech 1 7/8" Headers - ID 1050 Injectors - E85 - DSX Aux Pump -
22.5% Crank Pulley - Roto-Fab CAI w/ Big Gulp- CJ/Jannetty Tuned ~ PB ET 10.54 |
09-12-2018, 08:33 PM | #34 |
Ponies are for girls
|
This engine (LFX) throws me off. I'm totally out of my game on this car. Can't put headers on it, can't upgrade intake manifold. Not much out there for it. I can get CAI, throttle body upgrade. Nobody makes a procharger for it, can't upgrade ignition coils even.
__________________
H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro
|
09-13-2018, 08:22 AM | #35 |
Drives: 2012 ZL1 Join Date: Jul 2017
Location: Southeast Minnesota
Posts: 118
|
Time for a turbo.
__________________
~ 2012 ZL1 - DynaTech 1 7/8" Headers - ID 1050 Injectors - E85 - DSX Aux Pump -
22.5% Crank Pulley - Roto-Fab CAI w/ Big Gulp- CJ/Jannetty Tuned ~ PB ET 10.54 |
|
|
|
|