08-11-2013, 03:46 PM | #1 |
THE architect.
Drives: 2SS/RS M6 Join Date: Mar 2009
Location: Suwanee, GA/Seeley Lake, MT
Posts: 837
|
Pfadt ZL stage 2 installed...now clunking
I installed the Pfadt ZL stage 2 kit yesterday morning. Easy work and the results are awesome. Need to clean it up and take non-phone camera pics to give it justice.... but I've got a strange clunking/rattling on uneven road surfaces. On flat roads its silent, on hitting a lip or any sudden grade change with left/right hitting simultaneously its quiet. I'm pretty sure its up front but everything is tight. Could it be endlinks? I dunno...
__________________
#34122 EMPTIED, AT YARD ON 8/26/09; Delivered 9/07/09
MODS: Borla ATAK Cat-Back GFX (#140378), 35% Ceramic all-around, CAI, Inc. Intake w/ Scoop, Hurst Short Throw, Heritage Grille, GM Dove Tail, Laser Interceptor Triple v8.9, Passport Max, Pfadt ZL Stage 2 |
08-11-2013, 04:02 PM | #2 | |
Drives: none (yet) Join Date: Jul 2012
Location: The Villages, FL
Posts: 1,131
|
Quote:
|
|
08-11-2013, 04:29 PM | #3 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
Oh and I intend to eat the whole bag if it takes that long, got a problem with that.
|
08-11-2013, 05:13 PM | #4 |
THE architect.
Drives: 2SS/RS M6 Join Date: Mar 2009
Location: Suwanee, GA/Seeley Lake, MT
Posts: 837
|
Everything should be tightened up...not many things to be disconnected, either... now I can't get the jack under it though may need some 2x4s to drive onto and then pull the front tires off again and quadruple check. Frustrated.
__________________
#34122 EMPTIED, AT YARD ON 8/26/09; Delivered 9/07/09
MODS: Borla ATAK Cat-Back GFX (#140378), 35% Ceramic all-around, CAI, Inc. Intake w/ Scoop, Hurst Short Throw, Heritage Grille, GM Dove Tail, Laser Interceptor Triple v8.9, Passport Max, Pfadt ZL Stage 2 |
08-12-2013, 09:16 AM | #5 |
THE architect.
Drives: 2SS/RS M6 Join Date: Mar 2009
Location: Suwanee, GA/Seeley Lake, MT
Posts: 837
|
okay- went to bed, thought about it and here's my question of the morning... should this be seated completely against the strut housing? (i remember it being so before)
__________________
#34122 EMPTIED, AT YARD ON 8/26/09; Delivered 9/07/09
MODS: Borla ATAK Cat-Back GFX (#140378), 35% Ceramic all-around, CAI, Inc. Intake w/ Scoop, Hurst Short Throw, Heritage Grille, GM Dove Tail, Laser Interceptor Triple v8.9, Passport Max, Pfadt ZL Stage 2 |
08-12-2013, 12:35 PM | #6 |
THE architect.
Drives: 2SS/RS M6 Join Date: Mar 2009
Location: Suwanee, GA/Seeley Lake, MT
Posts: 837
|
RESOLVED.
Lower front endlinks had loosened up and the joints were popping threads. Gotta thank Rob over at Pfadt for the quick assistance!
__________________
#34122 EMPTIED, AT YARD ON 8/26/09; Delivered 9/07/09
MODS: Borla ATAK Cat-Back GFX (#140378), 35% Ceramic all-around, CAI, Inc. Intake w/ Scoop, Hurst Short Throw, Heritage Grille, GM Dove Tail, Laser Interceptor Triple v8.9, Passport Max, Pfadt ZL Stage 2 |
08-12-2013, 01:05 PM | #7 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
|
|
|
|
|