How much ya bench? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kyle.Gilmour · 06-29-2010, 07:43 PM

the Kenny Bell BAP is a great insurance mod... wish i had that on my last motor!

Git r done Legend... and that is a great number.. X HP has a stingy dyno... so you can rest assured that number is pretty solid

wbt · 06-29-2010, 08:04 PM

Quote:

Originally Posted by Legend

Well, back from the dyno and pulled 514 hp and 490 tq.

Did not swap to the smaller pulley as it was running lean at the top (6K and above) with it on there. Put the stock pulley back on and ran 11.6 A/F all the way across the board!

Mods are: TVS2300, Roto-Fab CAI, Kooks 1 7/8 LTs, 160 degree t-stat, MagnaFlow Street Series Cat-Back and tuned by Xtreme HP in Dallas.

Great guys to deal with too...they took their time, gave me a safe and reliable Camaro to romp around with! They certianly could have handed me the car back with the smaller pulley since it was good up to 6K but they told me what it was running and suggested I go back to the stock pulley. Good folks!! Thanks Extreme HP!

firefighter1 · 06-29-2010, 08:16 PM

Quote:

Originally Posted by Kyle.Gilmour

the Kenny Bell BAP is a great insurance mod... wish i had that on my last motor!

Git r done Legend... and that is a great number.. X HP has a stingy dyno... so you can rest assured that number is pretty solid

Kyle how's your car running, You have gotten it back correct???

2010SLVRBULIT · 06-29-2010, 08:22 PM

Quote:

Originally Posted by Fishdadddy

Don't know yet. But, I am working on 12 ounce curls as I type this.

ha, gotcha beat..by 28 ounces..

..

..:(..

ThunderSS · 07-03-2010, 08:53 AM

510 RWHP..
Stroked/Forged 416 Cid

Kyle.Gilmour · 07-06-2010, 10:30 AM

Quote:

Originally Posted by firefighter1

Kyle how's your car running, You have gotten it back correct???

I got it back.. i was loading my clubs and luggage in the trunk as it was coming off the dyno.. headed straight north to Michigan.

It up here in the cooler weather its prolly putting down 690 at the tires. not anywhere near where it should be. more wrenching and tuning needed.

BaylorCamaro · 07-06-2010, 10:46 AM

Anyone in the Kemah area know somewhere close that offers a dyno? All I know are places on the northside of Houston..

ThunderSS · 07-09-2010, 06:44 AM

Quote:

Originally Posted by BaylorAirForce

Anyone in the Kemah area know somewhere close that offers a dyno? All I know are places on the northside of Houston..

G-Force Motorsports.
They are located in Pearland, and are a sponsor on here.

SkunkJunk420 · 01-20-2015, 02:16 PM

revived

2013 2SS LS3, cai, headers, NPP exhaust... 425rwhp

How much ya bench?

ps: the saying is from an old snl skit

BullF-16 · 01-20-2015, 06:07 PM

1281/1133 and about 375 or so

*SSE 4 2SS* · 01-20-2015, 09:28 PM

^^^^^^^ that's sick for a daily driver...

I'll let you know in a couple months... But if not well north of 1800 rwhp I'll be disappointed...

BullF-16 · 01-21-2015, 02:48 PM

Quote:

Originally Posted by SSE 4 2SS

^^^^^^^ that's sick for a daily driver...

I'll let you know in a couple months... But if not well north of 1800 rwhp I'll be disappointed...

I haven't had the boost leash set to 25 psi since i drove it away after the setup. It is downright violent/dangerous with my tire setup.

I dont even turn on the CO2 bottle anymore, this give me 6 psi on the boost and that's still about 700 or so.

These 67s with my big A/R and meth are insane so far

Been waiting for you to get Brandi back together. If you dont blow the record out of the water in Oct.........

Are you gonna be ready for March?

*SSE 4 2SS* · 01-21-2015, 08:19 PM

Quote:

Originally Posted by BullF-16

I haven't had the boost leash set to 25 psi since i drove it away after the setup. It is downright violent/dangerous with my tire setup.

I dont even turn on the CO2 bottle anymore, this give me 6 psi on the boost and that's still about 700 or so.

These 67s with my big A/R and meth are insane so far

Been waiting for you to get Brandi back together. If you dont blow the record out of the water in Oct.........

Are you gonna be ready for March?

That's the million dollar question... If we are it looks like I'll be doing this on street tires... Though I called a guy in Florida today that is trying to get enough 315/40/19 Hoosiers on demand that Hoosier will make a run of them... I ordered four if he can get them made...

jc615 · 01-22-2015, 09:57 AM

470/430...feel like a 4 banger in here with numbers posted above

06-29-2010, 07:43 PM	#29
Kyle.Gilmour Charter Circle Member Drives: 427 LSX- with TWINS Join Date: Jan 2007 Location: Back in Michigan!! Do miss ATX and my Tejas friends Posts: 2,745 View My Garage	the Kenny Bell BAP is a great insurance mod... wish i had that on my last motor! Git r done Legend... and that is a great number.. X HP has a stingy dyno... so you can rest assured that number is pretty solid __________________

07-03-2010, 08:53 AM	#33
ThunderSS Drives: 2010 CGM 2SS/RS Join Date: Jul 2009 Location: East of Houston Posts: 804 View My Garage	510 RWHP.. Stroked/Forged 416 Cid __________________ 2010 Camaro SS/RS HKE Forged 416 CID http://www.fquick.com/ThunderZ28 510 HP/485 Ft. Lbs

07-06-2010, 10:46 AM	#35
BaylorCamaro Track > 1/4 Mile Drives: 2016 C7 Z51 Join Date: Sep 2009 Location: League City, TX Posts: 6,072 View My Garage	Anyone in the Kemah area know somewhere close that offers a dyno? All I know are places on the northside of Houston.. __________________ Automotive YouTube Channel / Texas World Speedway / MSR Houston

01-20-2015, 06:07 PM	#38
BullF-16 USAF retired! Thank God! Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011 Location: North Texas Posts: 2,799	1281/1133 and about 375 or so __________________ HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads Last edited by BullF-16; 01-21-2015 at 02:43 PM.

01-20-2015, 09:28 PM	#39
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,491	^^^^^^^ that's sick for a daily driver... I'll let you know in a couple months... But if not well north of 1800 rwhp I'll be disappointed... __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

01-20-2015, 02:16 PM	#37
SkunkJunk420 Drives: camaros Join Date: May 2010 Location: Austin, TX Posts: 851 View My Garage	revived 2013 2SS LS3, cai, headers, NPP exhaust... 425rwhp How much ya bench? ps: the saying is from an old snl skit

01-22-2015, 09:57 AM	#42
jc615 Account Suspended Drives: Camaro and Sierra Join Date: Jul 2012 Location: Virginia Posts: 795	470/430...feel like a 4 banger in here with numbers posted above

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro park bench available anywhere	cybercoaster	5th Gen Camaro SS LS LT General Discussions	7	05-03-2010 04:57 PM
Guide to Bench Racing	DGthe3	Chevy Camaro vs...	27	02-03-2010 06:31 PM
Delivery date in work bench?	aberg	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	18	05-17-2009 09:33 AM
Work Bench/ Auto book...I'm so confused!!!!	65Elco	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	04-07-2009 09:17 PM
Got my work bench how do i check it?	Croy	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	03-19-2009 06:58 PM