You are browsing camaro5 
 |
|
07-12-2019, 03:07 PM
|
#1 |
|
Virgil - Satan's Camaro
|
Powered Passenger Seat
Taking a shot in the dark here.
I bought a powered passenger seat, (I believe out of a 2012 SS) as a replacement for the non-powered seat in my 2010 SS. I'm trying to avoid the unknown as much as possible here, does anyone know if the seat will be plug 'n play? I found a thread where a non-powered seat was converted into a powered one, but I didn't see any modifications to the car-side, only to the seat itself. If anyone has this kind of specific knowledge on the body harness wiring and could answer this I'd appreciate! R/ Virgil
__________________
- Virgil2010
|
|
|
|
07-13-2019, 07:57 AM
|
#2 |
|
RIP Betsy ( Vitara )
Drives: '11 SGM 1LT/RS Join Date: Oct 2012
Location: Ottawa, Ontario
Posts: 1,178
   |
Plug and play for 2011.
2010 will have airbag codes.
__________________
 First retrofitted 2014 mylink. |
|
|
|
|
07-25-2019, 07:05 PM
|
#3 |
   
Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010
Location: Global Citizen
Posts: 1,243
|
I put a set of the 2014 1LE Recaro seats in my 2010. Driver seat fully PNP. Passenger seat had to add a pin to the harness and re-wire the new wire, can't remember the details, but you can probably find several threads with the details as at least 3 or 4 other guys have done it too.
Try this: https://www.camaro5.com/forums/showt...=Recaro&page=2
__________________
Meh
Last edited by My 5th; 07-25-2019 at 07:07 PM. Reason: add link |
|
|
|
|
|
|
|
 |
|
|
