07-15-2015, 03:19 PM | #1 |
Drives: 2010 SS, 2000 Pontiac Formula Join Date: Mar 2013
Location: Missouri
Posts: 509
|
325/40-18?
wondering will a 325/40-18 drag radial fir on our cars with no modification?
|
07-15-2015, 04:31 PM | #2 |
Drives: 2017 ZL1 A10 Join Date: Aug 2009
Location: Dubai
Posts: 1,250
|
I have them on my lowered ZL1 with no issues .
Ahmad
__________________
2017 ZL1 A10 SW (SOLD)
Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER. |
07-15-2015, 07:31 PM | #3 |
Drives: 2010 camaro with fast lane stage 2 Join Date: Apr 2011
Location: hagerstown
Posts: 705
|
Let's see a pic of that massive tire
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back |
07-15-2015, 07:55 PM | #4 |
Ben Rakers
|
what wheel and tire combo are you thinking of running?
__________________
2011 Camaro 2SS/RS K&N Blackhawk Cold air intake, Hawk Performance Ceramic pads, BAER drilled and slotted rotors, Side louver black faded inserts, Hurst Short Throw Shifter, BMR Trailing Arms, Elite Engineering Catch Can, MSD Spark Plug Wires, Texas Speed 1 7/8in Headers and cat back, High Flow Cats, 3 inch X-Pipe, Speed Dawg shift knob, Tuned by Nickey. And oh, its My first car.
https://www.youtube.com/channel/UC_L...5jF6EQEoKDNQ2g |
07-15-2015, 11:30 PM | #5 |
Drives: 2010 SS, 2000 Pontiac Formula Join Date: Mar 2013
Location: Missouri
Posts: 509
|
I'm just needing some radials quick for an event Saturday and found some local. They are bigger than what I was wanting to run but guess they will do in a pinch. 18x10 C6 wheels
|
07-16-2015, 02:17 AM | #6 |
Drives: 2017 ZL1 A10 Join Date: Aug 2009
Location: Dubai
Posts: 1,250
|
__________________
2017 ZL1 A10 SW (SOLD)
Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER. |
07-17-2015, 01:38 AM | #7 |
Drives: camaro Join Date: Jul 2015
Location: CA
Posts: 2
|
They are bigger than what I was wanting to run but guess they will do in a pinch. 18x10 C6 wheels
|
07-17-2015, 07:43 AM | #8 |
Drives: black Z28 Join Date: Apr 2013
Location: el mirage
Posts: 1,323
|
__________________
My family
1994 Z28 (mine) 2015 Camaro (wife's) 2015 Silverado (mine!) 54 Belair (wife's) 2004 silverado (daughters) |
07-22-2015, 05:04 PM | #9 |
Ben Rakers
|
which drag radials are those PHXLT1?
__________________
2011 Camaro 2SS/RS K&N Blackhawk Cold air intake, Hawk Performance Ceramic pads, BAER drilled and slotted rotors, Side louver black faded inserts, Hurst Short Throw Shifter, BMR Trailing Arms, Elite Engineering Catch Can, MSD Spark Plug Wires, Texas Speed 1 7/8in Headers and cat back, High Flow Cats, 3 inch X-Pipe, Speed Dawg shift knob, Tuned by Nickey. And oh, its My first car.
https://www.youtube.com/channel/UC_L...5jF6EQEoKDNQ2g |
07-23-2015, 07:45 AM | #10 |
"Black Ace"
Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008
Location: Ft. Lauderdale, FL
Posts: 1,352
|
__________________
2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009
Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq |
07-23-2015, 08:32 AM | #11 |
Drives: 2014 Camaro SS 1LE Join Date: Jul 2015
Location: Alabama
Posts: 21
|
|
07-23-2015, 11:10 AM | #12 |
Drives: 2010 camaro with fast lane stage 2 Join Date: Apr 2011
Location: hagerstown
Posts: 705
|
do u have a 3/4 rear shot to see how close the tires are
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back |
02-15-2018, 08:36 AM | #13 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
I'd like to see pics also
__________________
13 ZL1 A6
LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp |
|
|
|
|