06-17-2011, 09:22 AM | #1 |
car enthusiasts
|
Hard to start?
So my LS3 powered 2010 Camaro is having an issue, its starting hard. Here is the info on the problem
1. Car is cold and I have to go someplace- it starts fine 2. Car starts hard after I have driven it to another location and yes the car is warm. I have to let the car crank over twice as long (sometimes longer) as when it was cold 3. Last time it was in the shop I had them check number #7 plug because it was a dark color and gummy. (I had pulled the plugs to put on my shorty headers) What do you think?
__________________
|
06-17-2011, 09:54 AM | #2 |
I noticed over time a little bit of this...
Cold starts are perfect, then after I go somewhere for just a little bit, and when I restart and crank, it hesitates slightly,kinda like it wants to die... but still starts... I dont know if its me, or something but switched a tune and seems to happen less or not at all ?!
__________________
- 2013 Black ZL1 - A6 - Lingenfelter/Cordes Stage 2.5 packages E85 - FORE Fuel System - Kooks LTHs - Magnaflow Cans - Rotofab CAI/Big Gulp/Coolant Tank - Savini 3pc Forged - Underhood Dress Up (ACC & Drake & Moroso) - Hurst Shifter Kit - Custom Audio w/ JL Audio Sub/Amp/Stealthbox - Hand Polished Brace - Oracle Ghost Sidemarkers - LEDs everywhere - 624/617 on E85 & 545/548 on 91 (Sept 2015) - 693rwhp (Dec 15)
|
|
06-17-2011, 02:09 PM | #3 |
Account Suspended
|
check and watch your fuel pressure ...... I have personally seen it actually rise when key is cycled off . Then after initial attempt to start it drops back down and fires up......Dont know why...still figuring that part out
|
06-21-2011, 08:57 PM | #4 |
Account Suspended
Drives: 2006 Z06 Join Date: Oct 2010
Location: St. Louis, MO
Posts: 145
|
What's done to the car?
|
06-22-2011, 04:48 AM | #5 |
car enthusiasts
|
????
Well here is a thread that I started back in 09. It just know started to get bad again. It was never bad enough to take in till now.
http://www.camaro5.com/forums/showthread.php?t=46987 That was before I did anything to the car. I have put on these things since it started. drop in filter- K&N shorty headers -DT catback -flowmaster skipshift bypass tint- I don't think its that hurst shifter -I really don't think its that gas- 863 gals (give or take) not that either That is all that has been done to the car, other than maint and driving
__________________
|
06-22-2011, 05:11 AM | #6 |
Drives: 2010 Camaro 2SS LS3, 92 Camaro RS Join Date: Dec 2009
Location: Miami
Posts: 531
|
Please keep us posted on this.
|
10-25-2011, 07:05 AM | #7 |
car enthusiasts
|
going to the dealer for the second time with this problem, they found nothing the first time?????
__________________
|
10-26-2011, 01:53 AM | #8 |
|
Ive seen fuel pumps do this alot when they get weak.
|
10-27-2011, 04:50 AM | #9 |
car enthusiasts
|
Ok, here is an update to this problem. The dealer still can't find anything and told me to use tier-1 gas. It did it again this morning on the way into work, but they can't seem to get it to do it when they have the car.
I have been starting cars for 30 years now and I think I have it down, they said there is nothing wrong????? A few other people that have read this and I have talked to say its a leaky injector, I did pull plug #7 a year ago and found black gue on it and replaced it (the dealer did). The rest of the plugs were pulled and they are fine (med grey). here is a link to my first post in 09, I just found it. Sorry for the repost http://www.camaro5.com/forums/showthread.php?t=46987
__________________
|
11-08-2011, 04:11 PM | #10 |
car enthusiasts
|
?????
Well here is another update; I can only tell you what they did. The reasons for it still is with the dealer/tech.
1. Battery replaced- they had a reading that should have been around 12-14 volts and it was only 8.9. I think it was for the ECM???? 2. All the injectors- when being replaced they found a small amount of gas that had leaked out. I don't know where the leak was. The car didn't act up the morning after for the 1st thru the 3rd test drive; they were thinking it was fixed. That afternoon another drive around the block said otherwise when they parked it and tried to restart it. The car started hard like it has been doing for the last two years, I will say the dealer is keeping me updated. The dealer is Hampton Chevrolet, Hampton VA.
__________________
|
11-08-2011, 04:31 PM | #11 |
雪の玉
Drives: '22 Z71 RST Silverado Join Date: Feb 2011
Location: South
Posts: 3,415
|
Well at least it's happening for them, so they can't say nothing's wrong anymore.
|
11-24-2011, 07:06 AM | #12 |
Account Suspended
Drives: 2006 twin turbo Corvette Z06 Join Date: Nov 2011
Location: St. Louis, MO
Posts: 114
|
Are you tip starting the car, or holding the key until it fires? These cars use tip start meaning you can just flick the key forward and let go, and it will crank until it fires up on its own. You don't have to manually keep the starter engaged anymore. I've found they start a lot better when you tip start them. I assume keeping the key forward puts extra electrical drain on the system while cranking.
|
12-12-2011, 06:49 AM | #13 |
car enthusiasts
|
Update----- GM is sending someone down to look into it. They still don't know what is going on. The dealer has done a good job with keeping me notified with everything that is going on. I have the car now and its still doing the same, I will know more sometime in the near future.
__________________
|
05-05-2013, 01:07 PM | #14 |
Any resolution to this problem? My 2010 CAMARO built in April 2009 has the same problem.
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Remote Start doesn't seem to work | pennor | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 28 | 01-21-2018 10:30 PM |
Remote Start on Manual Transmission | Dentyneice | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 51 | 02-11-2015 01:56 PM |
Is there any actual proof whether hard or soft breakin better? | jackka | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 46 | 07-22-2010 03:26 PM |
Rough Engine Start After Tune? | Tanner | Tuning / Diagnostics -- engine and transmission | 9 | 10-08-2009 12:25 PM |