04-06-2010, 04:34 PM | #1 |
Drives: "Sergeant" a 1LT/SIM/RS/CONN/BA/M6 Join Date: Feb 2010
Location: Montreal
Posts: 203
|
Camaro has 1400 km and it leaks oil!!! WTF
My car has to go into the dealer tommorow morning, found a few oil drops in my driveway.Looked underneath it and wouldnt you know oil around the rear part of engine......
WTF !!!!! *****update**** Dealer called ! Transmission output shaft seal failure, questioned my hurst install and asked if tranny had to be lowered i said hell no.. he said ok no prob. car will be out til next monday cause part unavailable , have to fed-ex it from the states.... And the story begins ................................................. Last edited by Ex-stang; 04-07-2010 at 02:35 PM. |
04-06-2010, 06:04 PM | #2 |
Drives: 2010 SSRS, Victory Red, 6 speed Join Date: Mar 2010
Location: Hollister, Ca
Posts: 70
|
Mine is going back to the dealer this week for an oil leak that appears to be coming out of the bell housing. The dealer attributed the leak to an aftermarket oil filter on the first visit, brought the car home and cleaned it up during the header install, drove if 10 miles and checked it the next day, it's leaking and not at the oil filter! I though I saw a TSA on C5 regarding rear seal leaks but I haven't been able to find it.
|
04-07-2010, 01:39 PM | #3 |
Drives: 2010 Cyber Grey Camaro SS (LS3) Join Date: Mar 2010
Location: Clarksville TN
Posts: 2,275
|
I have heard it leaks from numerous different places and no one can really seem to pin point it. So far from what I gathered it has "leaked" from :
Oil Pan (design) Oil Pan gasket Oil cooler Oil filter and/or housing This is sad news, as I have already ordered one, and im not looking foward to playing the guessing game with the dealership once I take ownership. :( |
04-07-2010, 02:32 PM | #4 |
Drives: "Sergeant" a 1LT/SIM/RS/CONN/BA/M6 Join Date: Feb 2010
Location: Montreal
Posts: 203
|
Dealer called !
Transmission output shaft seal failure, questioened my hurst install and asked if tranny had to be lowered i said hell no.. he said ok no prob. car will be out til next monday cause part unavailable , have to fed-ex it from the states.... And the story begins ................................................. |
04-07-2010, 03:10 PM | #5 |
|
Oil cooler leak here. She is still leaking waiting on parts. Dealer said drive it. If it blows I make them pay.
Last edited by Scott@Bjorn3D; 04-08-2010 at 01:01 AM. |
04-07-2010, 10:06 PM | #6 |
Drives: 2010 SSRS, Victory Red, 6 speed Join Date: Mar 2010
Location: Hollister, Ca
Posts: 70
|
Dropped the car off at the dealer this afternoon, hope to have some news tomorrow. Will keep all posted with their findings.
|
04-08-2010, 10:54 AM | #7 | |
Drives: Saturn Sky,Camaro1SS Join Date: Feb 2009
Location: St. Louis MO
Posts: 86
|
Quote:
|
|
04-08-2010, 07:11 PM | #8 |
Drives: 2010 SSRS, Victory Red, 6 speed Join Date: Mar 2010
Location: Hollister, Ca
Posts: 70
|
Dealer update - they have narrowed it down to either the oil pan or rear seal
and are hoping it's the rear seal as this is only a 4 hr job vs. 12hrs for the oil pan. Will pull the transmission tomorrow and advise. More news to follow |
04-08-2010, 07:16 PM | #9 | |
Account Suspended
Drives: 2010 GT500 Join Date: Jan 2010
Location: Chicago.
Posts: 166
|
Quote:
LOL its not gonna blow from an oil leak. My oil cooler was leaking and they fixed it, now a few months later its leaking again. Just like my gen 1 small blocks. |
|
04-09-2010, 03:43 AM | #10 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
I had a double wammy. Both the oil pan gasket and the oil cooler seal were bad. It looked to be minor seapage that spread out all over my oil pan. It was covered under warranty and fixed in a day. Haven't had any other problems since. I'm well over 15K miles on the od.
__________________
UNDER CONSTRUCTION......again......
|
04-09-2010, 11:34 AM | #11 |
Drives: 2010 SSRS, Victory Red, 6 speed Join Date: Mar 2010
Location: Hollister, Ca
Posts: 70
|
Just spoke to the dealer and the leak source has been identified at the oil pan. As they suspect porosity of the pan they are ordering a new pan from GM. Hopefully it will arrive by next Wednesday and I'll have my car back Friday. FYI.. They have to drop the engine (from the bottom) to replace the pan.:(
|
04-10-2010, 10:13 PM | #12 |
Mike and Debbie
Drives: 2014 Corvette Stingray 3LT Z51 Join Date: Mar 2010
Location: San Antonio TX
Posts: 865
|
I have been waiting over a week for a seal...pinion leak. Very slight more like weeping.
__________________
|
04-10-2010, 11:01 PM | #13 |
Drives: 2010 2SS Imperial Blue Join Date: Mar 2010
Location: Lindenhurst, NY
Posts: 216
|
I wasnt leaking oil, i was burning it as blue smoke out the back exhaust. they replaced all the lifters as per a GM bulliten for L99 motors, book said it was 18 hour job for lifters.
__________________
2010 2SS IBM L99 6A, Janetty Tune, Dynatech headers and cats, Flowmaster exaust, SLP underdive pulley, CAI inc. CAI, MSD wires, LED's -taillights, side markers, knight rider, interior, Chevy emblem, rear plate
|
04-12-2010, 09:24 PM | #14 |
|
What does that mean exactly? The oil goes through the pan???
__________________
Black 2SS ordered 1/4/2010, received 2/19/2010
|
|
|
|
|