11-03-2015, 04:04 PM | #1 |
Drives: 2014 ZL1 Join Date: Apr 2014
Location: San Diego, CA
Posts: 86
|
Stains on rotor hats
Well....Out of pure laziness I decided to start cleaning my wheels with Meguair's Wheel Cleaner the last few washes and noticed what looks like water spots on the rotor hats.
Mostly the staining is on my front rotor hats but I have a little on the rears too. Any suggestions for removing these stains? Looks awful when the car is nice and clean (which it isn't now lol) and I have these crusty looking rotor hats peeking out behind the wheels. Thanks everyone
__________________
2014 Ashen Grey Metallic ZL1
|
11-03-2015, 04:23 PM | #2 |
Drives: 2014 ZL1 Join Date: Oct 2015
Location: Colorado
Posts: 56
|
I'd be more concerned about the wheels. Did the Meguair's cleaner do that bubbling on the wheels?
|
11-03-2015, 04:57 PM | #3 | |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
Quote:
I'd say you need to go out and perform on hard braking and that should clean off your rotors.....
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
|
11-03-2015, 11:27 PM | #4 |
Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2015
Location: Dubai
Posts: 77
|
Yeah the wheel looks fine, they are just water drops...
I think the OP is refering to the inner round piece, not the actual rotor? I mean the darker colored piece, there are water marks between the nuts, etc.
__________________
'15 ZL1 - Bright Yellow
Elite 2G Catch Can , Roto-Fab CAI |
11-03-2015, 11:50 PM | #5 |
Go fast, please.
|
Yeah, the center part of the 2 piece rotor in the front has some staining on it on mine too. I was just going to take them off and paint them or get them powdercoated with my rims.
|
11-04-2015, 09:53 AM | #6 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
My solution is much more exciting....
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
11-04-2015, 11:22 AM | #7 |
Perma Grinning
Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012
Location: Schaumburg, IL
Posts: 452
|
That's why I never use any product on my wheels that I would not use on the paint of my car.
The center hat of the ZL1 front rotor is anodized aluminum, the cleaner etched it.
__________________
Our Garage:
2018 Traverse High Country, 2017 Tom Henry Racing ZL1 Convertible, 2016 Silverado High Country HD, 2014 Camaro SS Convertible, 2012 Tom Henry Racing ZL1, 2002 Berger SS Phase II, 2001 Camaro SS Convertible, 1997 Hendrick Motorsports 30th Anniversary LT4 SS, 1992 Camaro RS Z03 25th . . . |
11-04-2015, 01:15 PM | #8 |
Drives: 2014 ZL1 Join Date: Apr 2014
Location: San Diego, CA
Posts: 86
|
Yep, that's what I'm referring too.
__________________
2014 Ashen Grey Metallic ZL1
|
11-04-2015, 01:17 PM | #9 |
Drives: 2014 ZL1 Join Date: Apr 2014
Location: San Diego, CA
Posts: 86
|
It's just a little rain and a dirty ass wheel!
__________________
2014 Ashen Grey Metallic ZL1
|
11-04-2015, 01:38 PM | #10 |
Drives: 2014 ZL1 Join Date: Apr 2014
Location: San Diego, CA
Posts: 86
|
Gotta be a way to clean these without refinishing. I mean, as much I love this car, and I hate saying this, but these aren't over the top trick rotors on an exotic. These are upgraded brakes on an assembly line built Camaro. Surely there's a fix
__________________
2014 Ashen Grey Metallic ZL1
|
11-04-2015, 06:35 PM | #11 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
I was having similar issues. I pulled my rotors off, cleaned and repainted them. I also did the calipers red.
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
11-04-2015, 06:41 PM | #12 |
Drives: Love the one you're with Join Date: Sep 2009
Location: Downtown Charlie Brown
Posts: 11,850
|
He said "rotor hat". Lol
My buddy is a rotor hat. Sorry, I doubt most people will notice. |
11-04-2015, 07:16 PM | #13 | |
Drives: 2014 Blue Ray Metalic ZL1 Join Date: Jul 2015
Location: North Western Washington
Posts: 11
|
Quote:
Thanks in advance. With painted surfaces, polish will remove water spots. Cleaner wax may do it.
__________________
2014 ZL1, MN6, Blueray Metallic, Recaros and Roto-Fab CAI
|
|
11-05-2015, 11:15 AM | #14 |
Drives: 18 ZL1 A10 Join Date: Nov 2008
Location: South East, FL
Posts: 3,024
|
Try some vinegar maybe its just water spots, that's why I always use car soap to clean my wheels. What really bothers me is that the front Hats are black and the rear Hats are silver!!
-bobby
__________________
2017 ZL1 M6 Bog City, 2013 ZL1 M6, 2010 2SS M6
ZL1::J-E-T-S JETS JETS JETS |
|
|
Thread Tools | |
|
|