07-05-2018, 09:47 AM | #1 |
Drives: 2017 Chevy Sonic RS 1.4T Join Date: Sep 2017
Location: Riverview, Florida
Posts: 327
|
Brake cooling ducts and intake scoop
Anybody craft their own intake scoop AND brake ducts? If so where? Could fog lights be modified to be the brake cooling ducts and the intake scoop in the grille?
Derrian
__________________
2015 Camaro RS/SS SIM LS3- Sold
2017 Sonic Mosaic Black RS 1.4T |
07-05-2018, 12:10 PM | #2 |
Fish Poop Aficionado
|
I have also been thinking of using the fog light holes as brake ducts. I’ll be working on something when I get access to a 3D printer at UGA next month. I’d be interested to see if anyone else has already done this.
__________________
|
07-06-2018, 09:20 AM | #3 |
Drives: '11 LS3 Join Date: May 2011
Location: So Cal
Posts: 41
|
|
07-06-2018, 09:33 AM | #4 |
Drives: '11 LS3 Join Date: May 2011
Location: So Cal
Posts: 41
|
|
07-06-2018, 10:08 PM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Theres a reason you shouldnt run them from fog light holes something about clean vs dirty air coming in through them, best to run them from under the car or outer lower grill section.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|