time for me to play with the nGauge... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DSX Tuning · 08-17-2017, 08:48 AM

I'm hoping to make some unique things happen with this puppy. Lucky for me, I know a lot of information about CAN data on GM vehicles, so I'm hoping to work with Ferraro and e-Motion to amp up what this thing can do. I know a lot of people have complained about the lack of trans temp, which if they'll work with me, I can easily make it happen!

dreksnot · 08-17-2017, 10:06 AM

Do give a detailed "Dave Review" of this new fangled gadget.

DSX Tuning · 08-17-2017, 11:24 AM

It's nice, but it needs some things added. Hopefully I can get that taken care of.

2thousand2 · 08-17-2017, 12:33 PM

Looks like fun Dave, you da man!

*mlee* · 08-21-2017, 09:41 AM

Needs a good mount somewhere too. A-pillar pod or something.

DSX Tuning · 08-21-2017, 10:23 AM

The suction cup one makes it pretty simple and easy/quick to remove if you ever want it out of the vehicle. Unfortunately, it's hard to warrant the mold cost for a low volume item specific to a non-standard gauge fitment. :(

*mlee* · 08-21-2017, 10:33 AM

Quote:

Originally Posted by DSX Tuning

The suction cup one makes it pretty simple and easy/quick to remove if you ever want it out of the vehicle. Unfortunately, it's hard to warrant the mold cost for a low volume item specific to a non-standard gauge fitment. :(

I guess that "really" answers my question "is it standard gauge size"

Suction cup would work fine.

DSX Tuning · 08-21-2017, 11:38 AM

Quote:

Originally Posted by mlee

I guess that "really" answers my question "is it standard gauge size"

Suction cup would work fine.

$19 add on that's an option on my site.

*mlee* · 08-21-2017, 04:49 PM

Quote:

Originally Posted by DSX Tuning

$19 add on that's an option on my site.

How much is the gauge?

DSX Tuning · 08-21-2017, 11:35 PM

The nGauge is $449. Let me know if you want to order, and I'll set up a free shipping code.

ZX1truth · 08-26-2017, 02:50 PM

I just bought one from Jim Ferraro before I saw this thread. Great guy. Looking forward to see what tricks you come up with Dave????
I bought this air vent mount from member " ZL1 4 Me" here.

http://www.camaro5.com/forums/showth...ghlight=NGauge

DSX Tuning · 08-26-2017, 08:15 PM

Quote:

Originally Posted by ZX1truth

I just bought one from Jim Ferraro before I saw this thread. Great guy. Looking forward to see what tricks you come up with Dave????
I bought this air vent mount from member " ZL1 4 Me" here.

http://www.camaro5.com/forums/showth...ghlight=NGauge

A friend of mine sent me a vent assembly to basically do the same thing (3D print a mount).

Abrz_ · 12-23-2017, 08:45 PM

Quote:

Originally Posted by DSX Tuning

The nGauge is $449. Let me know if you want to order, and I'll set up a free shipping code.

Would you still do the free shipping? If so I'm interested in one with the mount

seishuku · 12-24-2017, 12:40 AM

Quote:

Originally Posted by DSX Tuning

I'm hoping to make some unique things happen with this puppy. Lucky for me, I know a lot of information about CAN data on GM vehicles, so I'm hoping to work with Ferraro and e-Motion to amp up what this thing can do. I know a lot of people have complained about the lack of trans temp, which if they'll work with me, I can easily make it happen!

https://docs.google.com/spreadsheets...AQdDM/htmlview

Though that's on the single wire CAN bus, I suppose this gauge is just going through the high speed bus at the OBD2 port.

08-17-2017, 08:48 AM	#1
DSX Tuning Drives: 2019 Corvette ZR1 Join Date: May 2017 Location: St. Louis, MO Posts: 313	time for me to play with the nGauge... I'm hoping to make some unique things happen with this puppy. Lucky for me, I know a lot of information about CAN data on GM vehicles, so I'm hoping to work with Ferraro and e-Motion to amp up what this thing can do. I know a lot of people have complained about the lack of trans temp, which if they'll work with me, I can easily make it happen!

08-17-2017, 10:06 AM	#2
dreksnot Served USN - Atomic Chimp Drives: 13 Camaro LSX434 TT M6, 21 ZLE A10 Join Date: Jul 2012 Location: Fort Collins, CO Posts: 1,603 View My Garage	Do give a detailed "Dave Review" of this new fangled gadget. __________________ In excess of 1,000WHP LSX434 \| AGP 65/65 TT \| BTR Equalizer Intake \| Trickflow 245cc cathedral \| BTR custom cam \| Cortex EBC \| n2mb WOT \| ID-1700x \| Brisk GR12S \| RPM Lv 7 TR6060 \| AGP's Triple 525LPH Fore Fuel \| Monster LT1-S Triple \| 4.11 DSS Proform 9", CF driveshaft, 1400hp axles \| Hurst Line Lock \| MGW Retro Short Throw w/old skool Hurst T-handle \| ADM solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Moreno camber/caster plates

08-21-2017, 09:41 AM	#5
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,497 View My Garage	Needs a good mount somewhere too. A-pillar pod or something. __________________

08-26-2017, 02:50 PM	#11
ZX1truth Drives: 2010 2SS/RS Join Date: May 2010 Location: USA Posts: 592	I just bought one from Jim Ferraro before I saw this thread. Great guy. Looking forward to see what tricks you come up with Dave???? I bought this air vent mount from member " ZL1 4 Me" here. http://www.camaro5.com/forums/showth...ghlight=NGauge __________________ LME built LSX427 w/t all Callies internals\| AGP 65/65 TT \| Holley Sniper Intake \| Brodix BR3/LME custom ported \| LME custom cam \| Pro EFI 112 ECU \| ID-1700x \| NGK BR7EF \| AGP's-Fore Triple Fuel pump \| Monster LT1-S Triple \| ZL1 3.23 diff, CF driveshaft, ZL1 axles \| Hurst Line Lock \| MGW Retro Short Throw \| Pfadt solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Ground Control camber/caster plates \| Accelerated Racing Solutions tuned\| God is too good! I don't deserve it, but I sure will accept it!!!

08-17-2017, 11:24 AM	#3
DSX Tuning Drives: 2019 Corvette ZR1 Join Date: May 2017 Location: St. Louis, MO Posts: 313	It's nice, but it needs some things added. Hopefully I can get that taken care of.

08-17-2017, 12:33 PM	#4
2thousand2 Drives: 1997 Camaro SS Join Date: Jan 2010 Location: STL Posts: 106	Looks like fun Dave, you da man!

08-21-2017, 10:23 AM	#6
DSX Tuning Drives: 2019 Corvette ZR1 Join Date: May 2017 Location: St. Louis, MO Posts: 313	The suction cup one makes it pretty simple and easy/quick to remove if you ever want it out of the vehicle. Unfortunately, it's hard to warrant the mold cost for a low volume item specific to a non-standard gauge fitment. :(

08-21-2017, 11:35 PM	#10
DSX Tuning Drives: 2019 Corvette ZR1 Join Date: May 2017 Location: St. Louis, MO Posts: 313	The nGauge is $449. Let me know if you want to order, and I'll set up a free shipping code.