09-12-2017, 12:34 PM | #29 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
I am glad this thread woke back up. I am currently looking to upgrade to 6 piston calipers up front and need to start getting some part numbers and pricing. Saved a lot of searching!!
|
09-13-2017, 07:14 AM | #30 |
Drives: 2SS 1LE Silver w/Recaro NPP Join Date: Feb 2014
Location: Chester county, PA
Posts: 139
|
Here is one of the black calipers
__________________
-BtrBimmer
'14 2SS 1LE NPP Recaros |
09-14-2017, 06:09 AM | #31 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
is that the Vette black caliper?? That is EXACTLY what I am looking for, that is nice. May I inquire to where you purchased that? Rock Auto? Amazon? Summit?
As far as the backing plate, is there a straight swap out or is everyone modifying the SS one? |
09-14-2017, 08:47 AM | #32 |
Drives: 2SS 1LE Silver w/Recaro NPP Join Date: Feb 2014
Location: Chester county, PA
Posts: 139
|
Yes, its a 2017 Z06 Caliper.
I purchased one caliper at Summit and the other on Amazon, specifically looking for parts in stock, in an effort to get everything quickly. On my 1LE, I believe the backing plate is not an issue. It looks like it will clear.
__________________
-BtrBimmer
'14 2SS 1LE NPP Recaros |
09-15-2017, 07:48 AM | #33 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
Thanks. Can't wait to see it on your car. I am still hunting down what I need (and like you.. IN STOCK), along with prices.
|
09-15-2017, 03:44 PM | #34 |
Drives: 2SS 1LE Silver w/Recaro NPP Join Date: Feb 2014
Location: Chester county, PA
Posts: 139
|
__________________
-BtrBimmer
'14 2SS 1LE NPP Recaros |
09-15-2017, 05:23 PM | #35 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Thats a smoking deal!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-18-2017, 12:33 PM | #36 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
it is, and I think they are gone. Ugh.
|
09-18-2017, 09:14 PM | #37 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
I posted a set of Brembo pads from the corvette forum like new 150. You might get lucky and find a set of calipers there too.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-22-2018, 10:53 AM | #38 |
Drives: 2014 IOM SS RS Join Date: Nov 2011
Location: kennewick,wa
Posts: 26
|
I know that is thread is a year old since the last post, but I am just curious if the rear ZO6 calipers is interchangeable with the ZL1 rear?
|
07-25-2018, 02:25 PM | #39 |
Drives: 2015 Camaro SS 2SS Green Flash Join Date: Nov 2015
Location: Where the Army sends me
Posts: 205
|
I’m looking forward to doing this soon
|
07-26-2018, 11:29 PM | #40 | |
Drives: black Join Date: Mar 2017
Location: indy
Posts: 31
|
Quote:
the Z06 rear brakes will work..looks like. Can’t say 100% someone needs to try it. |
|
07-27-2018, 08:56 PM | #41 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
ZL1 and SS and CTS-V are the same 4 piston caliper and its not out of the realm of possibility that the Vette aren't the same 4 piston caliper. They will all have different PNs due to colors and scripts.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-11-2018, 08:33 PM | #42 |
Drives: 2015 2SS Summit White Join Date: Oct 2017
Location: Mitten State
Posts: 161
|
I could be wrong, but aren't the z06 rear calipers bigger? yes they are 4 pistons but I'm pretty sure they are physically bigger in size.
|
|
|
|
|