So....What Did you break??? - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RobRiot88 · 11-05-2010, 12:25 PM

haha my tail light bezel tab is epoxied. im telling you that shit saves lifes

masterwinning · 11-05-2010, 01:52 PM

So far nothing, and hopefully it stays that way.

SuperH · 11-07-2010, 10:24 PM

Quote:

Originally Posted by NFERGY 2011 RJT

SuperH ,do you have pics and where did you get the guards?

My dealer installed the edge guards. They are transparent stripes of plastic along the edges of the door.

Any place which will install Paint Protection Film can make edge guards. You cannot see them unless you look really closely.

stevegr8 · 12-10-2010, 12:40 AM

hey

for replacement you can visit www.autopartsway.ca and in future i would suggest you to buy part from AutopartsWay Very good prices, basically no duty and semi-reasonable shipping rates.

TXCammy · 12-10-2010, 06:14 AM

I haven't broken anything (knock on wood) but I keep getting nails and screws in my back tires!!! I had to have both rear tires repaired yesterday. One had a screw, the other had 2 nails. I've already had to replace one back tire because of a nail in the side wall. Not sure how thats happening...........

danhr · 12-10-2010, 06:43 AM

ring and pinion.

Silver2SSRS6spd · 12-10-2010, 07:06 AM

Strut tower shaft so far. It's a long story.

melody301 · 12-10-2010, 07:27 AM

Quote:

Originally Posted by KEEP RT

the (piggy) bank

v6sonoma · 12-10-2010, 07:52 AM

Quote:

Originally Posted by PAUL SS

My heart on November first when I put it away for the winter.

lol! Hang in there Paul. Perhaps us New Englanders should have a support group. "Hi my name is Jason and it's been 4 weeks since my last Camaro ride."

SSSoon · 12-10-2010, 06:24 PM

Quote:

Originally Posted by HDDAN

The little plastic cap on the console power outlet. Replaced on warranty. Curbrashed right rear. Sande it and clear coated over the sanding. With touch up. You can not notice it.

Hey, I need to fix up a set of four of polished aluminum factory rims that I bought off eBay for a reasonably good price (700$, including 4 stock Pirellis with the nibs still on). One has some scratches and one little gouge. I figured I could get someone to polish out some scratches but the guy I talked to on the phone said they can't do anything with polished aluminum. That doesn't sound right. What kind of wheel did you have sanded and clear coated? thanks!

SSSoon · 12-10-2010, 06:27 PM

Quote:

Originally Posted by SuperH

I have the door edge guards installed on mine. It's a thin, clear film which protects the paint, and takes the impact before the paint does.

My friend accidentally used it on his car. He opened my door, and it widely opened into his door. I was mad, but I didn't express it. I went to check and nothing happened to mine, so I got un-mad. He, however, suffered some serious damage from it.

It took a chip out of my edge guard, so I had a new one put on. My paint is 100% intact.

Where did you get the edge guards from? Link? Thanks!

G10 · 12-10-2010, 06:33 PM

Well... Some d bag broke my windshield. UGHHH... I hate that guy.

But the only thing I really did to her is when I was installing my spoiler I drilled through the plastic in the trunk leaving a hole. No biggie... but you hate to kill pristine.

She still looks like a friggin gem.

11-05-2010, 12:25 PM	#43
RobRiot88 Drives: 2010 SS 6m, black on black. Join Date: Jul 2010 Location: savannah Posts: 202	haha my tail light bezel tab is epoxied. im telling you that shit saves lifes __________________

12-10-2010, 06:43 AM	#48
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,023	ring and pinion. __________________ 2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph.

12-10-2010, 07:06 AM	#49
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	Strut tower shaft so far. It's a long story. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Break In Period?!?!?!	SimC33	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	87	07-07-2012 05:27 PM
How did you break your engine in?	DavidCigam	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	39	11-08-2010 07:07 PM
The BEST Break for a new car. "very long"	Darin Morgan	General Automotive + Other Cars Discussion	346	02-04-2010 06:49 PM
Who here did the OM Breakin vs Hard Break In?	TJ91	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	46	09-28-2009 09:46 AM
Break In	boricat	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	8	05-01-2009 01:51 PM

11-05-2010, 01:52 PM	#44
masterwinning Drives: 2013 Volt Join Date: Sep 2010 Location: Riverside Ohio Posts: 515	So far nothing, and hopefully it stays that way.

12-10-2010, 12:40 AM	#46
stevegr8 Drives: 2008 model Join Date: Dec 2010 Location: Los Angles Posts: 1	hey for replacement you can visit www.autopartsway.ca and in future i would suggest you to buy part from AutopartsWay Very good prices, basically no duty and semi-reasonable shipping rates.

12-10-2010, 06:14 AM	#47
TXCammy Drives: 2010 2SS/RS IBM/Beige/M6 Join Date: Jan 2010 Location: Groves, TX Posts: 225	I haven't broken anything (knock on wood) but I keep getting nails and screws in my back tires!!! I had to have both rear tires repaired yesterday. One had a screw, the other had 2 nails. I've already had to replace one back tire because of a nail in the side wall. Not sure how thats happening...........

12-10-2010, 06:33 PM	#54
G10 GForce Drives: 2010 Honolulu Blue 2LT M6 Join Date: Mar 2010 Location: San Francisco Posts: 595	Well... Some d bag broke my windshield. UGHHH... I hate that guy. But the only thing I really did to her is when I was installing my spoiler I drilled through the plastic in the trunk leaving a hole. No biggie... but you hate to kill pristine. She still looks like a friggin gem.