03-25-2020, 02:31 PM | #1 |
Drives: 2013 Chev Camaro LT2 RS Join Date: Dec 2019
Location: Green Bay WI
Posts: 31
|
Water methanol injection system question.
I am installing a new water methanol injection system and I am wondering if it is better to have the spray nozzle mounted closer to the air filter or the throttle body and why?
|
03-25-2020, 03:18 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
I'm half way. Cause that is where the instructions said to put them.
|
03-25-2020, 09:01 PM | #3 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,048
|
Devils own suggest 6” away from throttle body.
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
03-26-2020, 06:38 PM | #4 |
Drives: 2013 Chev Camaro LT2 RS Join Date: Dec 2019
Location: Green Bay WI
Posts: 31
|
Ok, thanks for the info! I'm super excited to see what this will do for my intake temps.
|
03-30-2021, 08:20 PM | #5 |
Drives: Gen5LFXfi Join Date: Feb 2021
Location: Wa
Posts: 13
|
do you guys have any results from the meth install? I was hoping to find a little more info for choosing brands and particular systems for the LFX
|
|
|
|
|