1,000 HP Extreme Duty Rear Axles and CV Joints Package - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SpohnPerformance · 10-07-2009, 09:29 AM

1,000 HP Extreme Duty Rear Axles and CV Joints Package

These Extreme-Duty axles for the 2010+ Chevrolet Camaro SS are designed to handle up to 1,000 HP! Using chrome moly center bars, 108mm Porsche style CV's and bolt on chrome moly inner and outer stubs, these are a direct bolt on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, they use different diameter chrome moly axle bars on each side which will eliminate wheel hop. Wheel hop at launch can be extremely damaging to the drivetrain and makes getting traction very difficult.

The factory Camaro axles are made with different diameter axle bars, but the spline diameter is the same on both sides and the large diameter axle bar tapers down to a spline that is half the diameter. This transition creates a weak point on the axle bar that cannot withstand increased horsepower. Our axles are made with 1-1/8” & 1-3/8” diameter bars that are splined on the full diameter of the bar, without being tapered down so drastically and creating a weak point (see the photo that shows our extreme duty axles: stock axle bar on left and extreme-duty axle bar on right).

These axles and CV joints are priced as a complete set and have a 1 year warranty.

For more information and online ordering click here.

1320junkie · 10-07-2009, 09:32 AM

Good stuff

klove · 10-07-2009, 09:58 AM

i guess this just means i need a 1000HP

Crowley · 10-07-2009, 10:17 AM

Very nice !!! I would have felt a lot more confident had I had these last week .. LOL

Crowley

SpohnPerformance · 10-07-2009, 10:31 AM

I know this is a big ticket item. We could do a Group Buy if there is interest. We would need 5 or more orders and we could knock 10% off the price.

Thanks,
Steve

formaxboxers · 10-11-2009, 08:11 PM

How much are we talking? Went to the website and couldn't find anything for the 2010's.

Merc · 10-11-2009, 11:10 PM

So how many HP can the stock center section handle?

SpohnPerformance · 10-12-2009, 07:43 AM

Quote:

Originally Posted by formaxboxers

How much are we talking? Went to the website and couldn't find anything for the 2010's.

http://www.spohn.net/shop/2010-Chevr...et-Camaro.html

600hp-lpe · 10-17-2009, 07:48 AM

Quote:

Originally Posted by SpohnPerformance

I know this is a big ticket item. We could do a Group Buy if there is interest. We would need 5 or more orders and we could knock 10% off the price.

Thanks,
Steve

I'd be interested in the group buy.

Speed74SS · 10-17-2009, 05:37 PM

I would be interested as well.

SpohnPerformance · 10-18-2009, 04:47 PM

Quote:

Originally Posted by Speed74SS

I would be interested as well.

We have two, just need three more and we can get this going. When we get five I'll post up a coupon code you can enter when checking out to give you the discount.

Thanks,
Steve

Speed74SS · 10-18-2009, 07:49 PM

Sounds great!! Let's go boys - I know there's more out there that need these axles...

the rich dude · 10-18-2009, 09:00 PM

are these axles staggered in size to help reduce wheel hop?

5th Gen SS · 10-18-2009, 09:05 PM

Count me in for a set. I will be pushing those numbers next Feb/March. First SEMA then phase 2.

10-07-2009, 09:29 AM	#1
SpohnPerformance Drives: 2010 Camaro SS/RS Join Date: Mar 2009 Location: Myerstown, PA Posts: 26	1,000 HP Extreme Duty Rear Axles and CV Joints Package 1,000 HP Extreme Duty Rear Axles and CV Joints Package These Extreme-Duty axles for the 2010+ Chevrolet Camaro SS are designed to handle up to 1,000 HP! Using chrome moly center bars, 108mm Porsche style CV's and bolt on chrome moly inner and outer stubs, these are a direct bolt on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, they use different diameter chrome moly axle bars on each side which will eliminate wheel hop. Wheel hop at launch can be extremely damaging to the drivetrain and makes getting traction very difficult. The factory Camaro axles are made with different diameter axle bars, but the spline diameter is the same on both sides and the large diameter axle bar tapers down to a spline that is half the diameter. This transition creates a weak point on the axle bar that cannot withstand increased horsepower. Our axles are made with 1-1/8” & 1-3/8” diameter bars that are splined on the full diameter of the bar, without being tapered down so drastically and creating a weak point (see the photo that shows our extreme duty axles: stock axle bar on left and extreme-duty axle bar on right). These axles and CV joints are priced as a complete set and have a 1 year warranty. For more information and online ordering click here. Last edited by SpohnPerformance; 10-14-2009 at 11:07 AM.

10-07-2009, 10:17 AM	#4
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	Very nice !!! I would have felt a lot more confident had I had these last week .. LOL Crowley __________________

10-11-2009, 08:11 PM	#6
formaxboxers Drives: Red Jewel Tintcoat 2SS/RS Join Date: Sep 2009 Location: Oklahoma Posts: 485	How much are we talking? Went to the website and couldn't find anything for the 2010's. __________________ 2010 Red Jewel Tintcoat 2SS/RS, Black Rally Stripes, Black Interior, M6, Sunroof, 20" Polished Wheels, Solo Mach-X Cat Back Exhaust, Blacked Out Bowties Got screwed by original dealer in Eufuala, Oklahoma on November 3, 2009. Found new one at Paddock Chevrolet and drove 2400 miles roundtrip to pick her up in Buffalo, New York on Nov. 5, 2009.

10-17-2009, 05:37 PM	#10
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	I would be interested as well. __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

10-18-2009, 07:49 PM	#12
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Sounds great!! Let's go boys - I know there's more out there that need these axles... __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

10-07-2009, 09:32 AM	#2
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	Good stuff

10-07-2009, 09:58 AM	#3
klove Drives: black 2SS RS Join Date: Jun 2009 Location: Enterprise, AL Posts: 151 View My Garage	i guess this just means i need a 1000HP

10-07-2009, 10:31 AM	#5
SpohnPerformance Drives: 2010 Camaro SS/RS Join Date: Mar 2009 Location: Myerstown, PA Posts: 26	I know this is a big ticket item. We could do a Group Buy if there is interest. We would need 5 or more orders and we could knock 10% off the price. Thanks, Steve

10-11-2009, 11:10 PM	#7
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,291	So how many HP can the stock center section handle?

10-18-2009, 09:00 PM	#13
the rich dude Drives: Getting 2010 Camaro Join Date: Jul 2008 Location: Vancouver Posts: 1,149	are these axles staggered in size to help reduce wheel hop?

10-18-2009, 09:05 PM	#14
5th Gen SS Drives: 2010 2SS/RS M6 IOM and Black/IOM Join Date: Jul 2009 Location: Phoenix Posts: 152	Count me in for a set. I will be pushing those numbers next Feb/March. First SEMA then phase 2.