Remodeling...whatcha think? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroDIYking · 03-25-2013, 10:22 PM

Aded trunk blackout kit, added rear camaro letter and black side lettering (thanks to Emblem Pros!), powdercoated the wheels, painted the center caps black, did muffler delete on top of dynomax catback exhaust, painted bowtie, added red grille lighting, added white grille lighting (2 seperate switches), added red footwell lighting, added red trunk lighting, added LED to the dome, fog lights and license plate lights, tinted the tail lights and sidemarkers, added red engine bay lighting

Soon to come: DRL harness, sound system, darker tinted windows, hood spears, painted engine cover, ALOT of painted interior parts, painted door an dash trim (keeping ABL) and switching all dash and radio LEDs.
I'm gonna be pretty busy

CamaroDIYking · 03-25-2013, 10:24 PM

Here's more

CamaroDIYking · 03-25-2013, 10:25 PM

Sorry guys. Idk why the first picture is sideways

midnighter · 03-25-2013, 10:26 PM

It looks great. Nice job.

CamaroDIYking · 03-25-2013, 10:30 PM

Thanks! I just need to figure out how to paint...my expertise is electrical and wiring lol

POWERMAN · 03-25-2013, 11:33 PM

That 'Camaro' on the back really isnt doing it for me..but its different I'll admit.

Love the Black/white contrast you got going on...wonder how it looks with a black roof..and a blacked out rear diffuser..

Liam · 03-26-2013, 01:56 AM

Looks great! Just my opinion, but I think if the ground effects and the rear diffuser were black it would really give it great contrast and stand out, but still look very clean.

jackyl22 · 03-26-2013, 05:56 AM

Looks great be careful not to do too much. Can get a little to busy but def need to black out the roof for sure. This will give a nice aggressive look.

jackyl22 · 03-26-2013, 05:58 AM

Oh also agree diffuser should be black along with splitter and rockers.

nester7929 · 03-26-2013, 06:09 AM

Looks good. My only advice is to go easy on painting the interior; less is more in many cases. Especially if you're not familiar with painting.

CamaroDIYking · 03-26-2013, 06:40 AM

Thanks for the feedback guys. The only thing is, I don't want to have to deal with going through with painting alot of stuff as this is my daily driver .

nyrfan · 03-26-2013, 06:55 AM

Car looks good! I'm just not a fan when people put the big Camaro lettering on their cars (windshield, rear, etc.) but that just me.

biggerisbetter · 03-26-2013, 07:56 AM

loks great and in this case i like the camaro lettering

Secret Squirrel · 03-26-2013, 07:57 AM

Very nice!

03-25-2013, 10:22 PM	#1
CamaroDIYking Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013 Location: Georgia Posts: 229	Remodeling...whatcha think? Aded trunk blackout kit, added rear camaro letter and black side lettering (thanks to Emblem Pros!), powdercoated the wheels, painted the center caps black, did muffler delete on top of dynomax catback exhaust, painted bowtie, added red grille lighting, added white grille lighting (2 seperate switches), added red footwell lighting, added red trunk lighting, added LED to the dome, fog lights and license plate lights, tinted the tail lights and sidemarkers, added red engine bay lighting Soon to come: DRL harness, sound system, darker tinted windows, hood spears, painted engine cover, ALOT of painted interior parts, painted door an dash trim (keeping ABL) and switching all dash and radio LEDs. I'm gonna be pretty busy Attached Images __________________ 2010 2SS/RS- every option possible in 2010 Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.

03-25-2013, 10:24 PM	#2
CamaroDIYking Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013 Location: Georgia Posts: 229	Here's more Attached Images __________________ 2010 2SS/RS- every option possible in 2010 Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.

03-25-2013, 10:25 PM	#3
CamaroDIYking Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013 Location: Georgia Posts: 229	Sorry guys. Idk why the first picture is sideways __________________ 2010 2SS/RS- every option possible in 2010 Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.

03-25-2013, 10:30 PM	#5
CamaroDIYking Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013 Location: Georgia Posts: 229	Thanks! I just need to figure out how to paint...my expertise is electrical and wiring lol __________________ 2010 2SS/RS- every option possible in 2010 Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.

03-26-2013, 05:56 AM	#8
jackyl22 Jackyl Drives: 2012 Inferno Orange 2SS/RS Join Date: Apr 2012 Location: Ft Lauderdale, FL Posts: 167	Looks great be careful not to do too much. Can get a little to busy but def need to black out the roof for sure. This will give a nice aggressive look. __________________ Maggie TVS2300, Texas Speed CAM, CAI Intake, Stainless Works Long Tube Headers No Cats, Stainless Works Retro Cat Back Exhaust, BMR Strut Tower Brace, BMR Lowering Springs, BMR Trailing Arms, BMR Toe Rods, BMR Subframe Bushings, BMR Differential Bushings, BMR Front & Rear Sway Bars with End Links, 3.91 Gears, Moroso Catch Can..... To be Continued

03-25-2013, 10:26 PM	#4
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,906	It looks great. Nice job.

03-25-2013, 11:33 PM	#6
POWERMAN Drives: '13 Charger Sxt+ Join Date: Mar 2013 Location: Canada Posts: 321	That 'Camaro' on the back really isnt doing it for me..but its different I'll admit. Love the Black/white contrast you got going on...wonder how it looks with a black roof..and a blacked out rear diffuser..

03-26-2013, 01:56 AM	#7
Liam Tampa Bay Camaros Drives: 2016 Camaro 2SS, Hyper Blue Join Date: Jan 2013 Location: New Port Richey, Florida Posts: 253 View My Garage	Looks great! Just my opinion, but I think if the ground effects and the rear diffuser were black it would really give it great contrast and stand out, but still look very clean.

03-26-2013, 05:58 AM	#9
jackyl22 Jackyl Drives: 2012 Inferno Orange 2SS/RS Join Date: Apr 2012 Location: Ft Lauderdale, FL Posts: 167	Oh also agree diffuser should be black along with splitter and rockers. __________________ Maggie TVS2300, Texas Speed CAM, CAI Intake, Stainless Works Long Tube Headers No Cats, Stainless Works Retro Cat Back Exhaust, BMR Strut Tower Brace, BMR Lowering Springs, BMR Trailing Arms, BMR Toe Rods, BMR Subframe Bushings, BMR Differential Bushings, BMR Front & Rear Sway Bars with End Links, 3.91 Gears, Moroso Catch Can..... To be Continued

03-26-2013, 06:09 AM	#10
nester7929 Rice Harvester Drives: 2014 Bright Yellow 2SS/RS Join Date: May 2008 Location: Plainview, TX Posts: 1,449	Looks good. My only advice is to go easy on painting the interior; less is more in many cases. Especially if you're not familiar with painting.

03-26-2013, 06:40 AM	#11
CamaroDIYking Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013 Location: Georgia Posts: 229	Thanks for the feedback guys. The only thing is, I don't want to have to deal with going through with painting alot of stuff as this is my daily driver . __________________ 2010 2SS/RS- every option possible in 2010 Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.

03-26-2013, 06:55 AM	#12
nyrfan Let's go Rangers! Drives: 13' AGM 2SS/RS L99 Join Date: Jun 2011 Location: Orlando, FL Posts: 10,742 View My Garage	Car looks good! I'm just not a fan when people put the big Camaro lettering on their cars (windshield, rear, etc.) but that just me. __________________ Soprano 4/1/00-6/14/11, Gone but NEVER forgotten! FSP tuned: 377/389 Last edited by nyrfan; 03-26-2013 at 09:52 AM.

03-26-2013, 07:56 AM	#13
biggerisbetter lll Drives: 2010 camaro ss L99 Join Date: Jan 2013 Location: new orleans Posts: 1,176	loks great and in this case i like the camaro lettering __________________ PERFORMANCE DYNATECH LT 1 7/8 HEADERS, CATLESS MID PIPES, CORSA CATBACK, CAI. COLD AIR INTAKE w/ SCOOP, 1LE 3:91 GEARS, LETHAL RACING PROWLER CAM, LETHAL RACING DYNO TUNE, ENERGY CRADDLE BUSHING INSERTS, PADDLE SHIFTER RELOCATE KIT, 449RWHP/438TQ APPEARANCE COPO HOOD, ZL1 SPOILER, SLP BLACKOUT PANEL, PLASTI DIP WHEELS, HERITAGE GRILL, RETRO SS EMBLEMS, WEATHER TECH FLOOR MATS, ORANGE STITCHING

03-26-2013, 07:57 AM	#14
Secret Squirrel Drives: 1965 Chevelle Malibu Join Date: Jan 2012 Location: San Antonio, Tx Posts: 472 View My Garage	Very nice! __________________