Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > 5th Gen Camaro SS LS LT General Discussions


Reply
 
Thread Tools
Old 05-23-2020, 10:42 PM   #1
SR71
 
SR71's Avatar
 
Drives: 2012 45th Anniversary 2SS
Join Date: Dec 2011
Location: Lacey, WA
Posts: 336
ISO Door window wiring diagram

Does anyone have a wiring diagram for the door? My passenger window isn't going up and the car doesn't even seem to recognize it to try and calibrate it. Trying to see if there is an issue in the wiring somewhere. Thanks.
__________________
SR71 is offline   Reply With Quote
Old 05-24-2020, 12:05 AM   #2
Camaro_Fuzion
 
Camaro_Fuzion's Avatar
 
Drives: 2010 Chevy Camaro 2SS
Join Date: Dec 2016
Location: Houston, TX
Posts: 68
Quote:
Originally Posted by SR71 View Post
Does anyone have a wiring diagram for the door? My passenger window isn't going up and the car doesn't even seem to recognize it to try and calibrate it. Trying to see if there is an issue in the wiring somewhere. Thanks.
In the past. I have gone to a chevy dealer's parts department and they have provided me with a complete assembly diagram of said part in question. Sometimes if you choose your keyword searches on google. You can find the diagram and the complete assembly of related parts in PDF.
Camaro_Fuzion is online now   Reply With Quote
Old 05-24-2020, 01:28 PM   #3
InFiD3ViL


 
InFiD3ViL's Avatar
 
Drives: 2010 CGM 2SS LS3 Swapped A6
Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 3,000
It's going to take me some time to get it all together but I will start posting some info in here for you. I have been dealing with driver side window issues for over a year. Unfortunately, with your issue being on the passenger side it actually makes things a little more difficult to troubleshoot, as the problem can be rooted in either the driver side (master switch/wiring or passenger side switch/wiring).

I will post or PM full window wiring schematic (Window Schematic.pdf), switch and connector pinouts, and door blowouts. Some of the diagrams are corrupt, but you should still have enough info to start troubleshooting. It is easy to determine if the issue is a switch or window motor as you can apply ground to the pins for 'Master Passenger Up' command at both the passenger and driver's door window switch connector (Pinout Diagram attached). If the window goes Up while bypassing the switch...it is likely the switch. Just keep in mind that the Driver's side switch MAY override the Passenger side, so I am not sure if a bad driver's side switch will cause loss of related controls on the Passenger side, even if the Pass side switch is good.

Also included is the GM diagnostic troubleshooting/testing flow for each window.

I would suggest ordering a bag of these or similar from another manufacturer (This brand is brittle). Every time I take my door panel off to work on the window I break at least 1 or 2: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Finally, there may be some duplicate information between the pdfs. Good luck and please let us know what you find.
Attached Images
File Type: pdf Driver Door Window & Switch Diagram and Testing.pdf (112.4 KB, 6 views)
File Type: pdf Driver door Window Regulator Diagram.pdf (69.1 KB, 3 views)
File Type: pdf Driver Window Switch Connector.pdf (69.0 KB, 2 views)
File Type: pdf Driver&PassDoorX500X600 Connectors.pdf (669.3 KB, 6 views)
File Type: pdf Driver&PassengerWindowMotorConnector.pdf (425.9 KB, 1 views)
File Type: pdf LIN BUS 1-3 Error.pdf (163.4 KB, 2 views)
File Type: pdf LIN BUS 3-4 Error.pdf (153.2 KB, 2 views)
File Type: pdf Window Schematic.pdf (442.2 KB, 3 views)
File Type: pdf PassWindow Motor connector.pdf (69.8 KB, 2 views)
File Type: pdf PassWindowSwitchConnector.pdf (60.8 KB, 3 views)
__________________
2010 CGM Camaro 2SS LS3 Swap A6 - GPI SS1 .646/.637, (224/237, 112 +4) 8620 core, Melling HV 10296, CHE trunnions, heads milled .015, TSP longtubes (Catless), X-Pipe, FM Outlaw axle back, Stage 2 ported throttle body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, Hinson wires/NGK TR6IX plugs, 160º stat, Vitesse TC, slotted/cross drilled rotors w/Hawk performance ceramic pads, ZL1 leather steering wheel swap, ZL1 Add-Ons wicker bill spoiler, SLP front splitter - Megan Racing adjustable coilovers, Firestone Firehawk Indy 500s - Tuned by Ryan @ GPI

Last edited by InFiD3ViL; 05-24-2020 at 02:16 PM.
InFiD3ViL is offline   Reply With Quote
Old 05-24-2020, 10:12 PM   #4
SR71
 
SR71's Avatar
 
Drives: 2012 45th Anniversary 2SS
Join Date: Dec 2011
Location: Lacey, WA
Posts: 336
Thank you so much! This will be super helpful!
__________________
SR71 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:33 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.