12-20-2014, 01:36 PM | #1 |
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
Harness Plate (tank plate)
* Manufactured from HSLA (High Strength Low Alloy) Steel
* 5lbs each including hardware (2lbs lighter than other plates) * Low profile and follows the contour of the floor closely * Retains the use of the factory seat bolts. * Low profile eye bolts won’t interfere with seat tracking * Eye bolts are grade 8.8 high tensile strength and shouldered for angular loads * Multiple locations for mounting anti-sub strap * Can be used with 4/5/6 point harnesses * Requires snap hook harness ends * powder coated semi-gloss black but there is a possibility of alternate colors at additional cost. Pricing: -$225.00 each, (driver or passenger) FREE SHIPPING (within the lower 48) Payments through PayPal
__________________
LMS Engineering
Last edited by White_SS/RS; 07-29-2015 at 01:52 PM. Reason: availible to ship. new pics |
12-20-2014, 02:22 PM | #2 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Looking real good man. Price is a lil more then I thought but if it's all quality stuff I'm perfectly ok with that.
3 questions. Are you making a harness bar? Running the plates, and a harness bar I should be able to run a 6 point set up safely with the stock seats right?(until I get the recaros) and lastly this is all bolt on, Or are modifications necessary?
__________________
Patiently waiting for my 2023 SS 1LE |
12-20-2014, 02:54 PM | #3 |
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
I know it just seems like a plate of steel but its much more... Research and engineering, (I didn't just copy) plating, cutting, bending, edge finish, coatings, hardware, time, it all adds up. It really gave me a perspective on why speedwares plates were $370 ea. and am glad I was able to offer a high quality part for less. You won't be disappointed!
I am in the process of designing a harness bar... At a minimum something similar to other designs but I want to improve on it. It will be a little while before I get it into production. Plates are purely bolt on -move the seat forward remove the seat bolts going into the floor with a T50 torx bit and place the plate between the seat and floor, reuse the same bolts and your done. Harness bar will not require modification to your interior pieces. Yes, you'll be able to run a 6 point with your stock seats, or any other seat for the matter.
__________________
LMS Engineering
|
12-20-2014, 04:09 PM | #4 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
Are these a limited run, or do you plan to keep them stocked?
Sent from my iPhone using Tapatalk |
12-20-2014, 05:12 PM | #5 |
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
I'm going to do limited runs at a time, but I'm hoping the market will lead to keeping a stock.
__________________
LMS Engineering
|
12-21-2014, 06:51 AM | #6 |
BeckyD Rocks :-)
|
Looks like this is where some of my tax refund is going to be spent on.
__________________
2015 CRT 1SS/1LE RS/Recaro's/NPP/Nav/Rear vision pkg./BA speaker upgrade. Stage 3 BMR cam, ARH 1 7/8 headers, CAI,
BMR 1.25 drop springs, JPSS Billet Bushings, Peddars Cradle Bushings...460 whp...so far....SOLD, but not forgotten! |
12-21-2014, 12:20 PM | #7 | |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Quote:
__________________
Patiently waiting for my 2023 SS 1LE |
|
12-21-2014, 01:01 PM | #8 | |
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
Quote:
__________________
LMS Engineering
|
|
12-21-2014, 02:33 PM | #9 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
I think a bolt in harness bar that connects to as many points as possible to stiffen the chassis and provides a good place to mount the belts is what 99% of your buyers would probably want. Once you have the design for the harness bar you could always incorporate that into a roll cage design for those who need that kind of protection. Make the roll cage a custom made to order item. That way your not sitting on inventory forever. And as far as names goes maybe something like track tech? Race Spec Engineering?(RSE!) my ideas are free! Lol
__________________
Patiently waiting for my 2023 SS 1LE |
12-21-2014, 03:16 PM | #10 |
Master Amateur Mechanic
Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013
Location: South Barrington, IL
Posts: 1,720
|
I would like a pair, thanks.
|
12-21-2014, 03:21 PM | #11 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
I'm glad these are available, great job - reasonably priced, but not an easy buy for me at the moment. I'll also probably wait until I can get them as a set with a harness bar.
|
12-21-2014, 03:27 PM | #12 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Same here I'd want to do a harness bar with the plates as well.
__________________
Patiently waiting for my 2023 SS 1LE |
12-21-2014, 05:34 PM | #13 | ||
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
Quote:
Quote:
__________________
LMS Engineering
|
||
12-23-2014, 01:29 PM | #14 |
Drives: 2013 IOM ZL1 Join Date: Nov 2013
Location: United States
Posts: 4
|
Put me down for a set and I'll take them as soon as I can get them.
|
|
|
|
|