You are browsing camaro5 
 |
|
06-04-2022, 04:18 PM
|
#1 |
 
|
Spring compressor for shocks/struts
I was wondering what spring compressors other people are using for suspension springs? I just used the garbage claw one I picked up ages ago to replace a spring on a friends car, and it got me thinking it might be nice to treat myself to something newer and likely easier to use.
__________________
2010 Camaro 2SS
2018 Charger GT+ 2005 Cavailer LS S/C - Sold '87 HD FXRT - Wrecked pending repair |
|
|
|
07-31-2022, 02:56 PM
|
#2 |
       
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,216
|
I use the ones that have a threaded rod going through the two hooks. I think the first time I swapped springs I used ratchet straps. It does not take much to relieve the pressure on the stock springs.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, and meth. Z28 suspension.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. |
|
|
|
|
08-08-2022, 02:17 PM
|
#3 |
|
Anthony S
Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021
Location: Oakland park , FL
Posts: 165
|
I took my struts apart and reinstalled them without a compressor. They really dont have alot of tension on them in these cars.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181 Texas Speed 2 inch headers, high flow cats, X-pipe and Mufflers. Cold air inductions Cold air intake with JRE intake scoop mod. Tuned by Redline Motorsports. MGW Shifter. DSS One-piece 3.5" Driveshaft, BCRacing Coilovers. BMR everything. |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
