My 2010 1SS M6 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bo White · 12-30-2013, 09:36 PM

Yes, I bought it from him. Thanx

Bo White · 10-02-2014, 04:52 AM

Just an update. Put the splitter back on when I replaced the bumper and had the grill painted. Swapped the 60lb injectors for 80s and swapped to a 3.12 pulley. Also took the Vortech intake off.

camaro500 · 10-02-2014, 07:29 AM

Really nice setup! How do the KW ride?

Bo White · 10-02-2014, 08:08 AM

Fairly stiff. Not too bad though.

Bo White · 02-04-2015, 08:20 PM

Update
I swapped my lower 7" pulley for a 7.8" so I could have use of the pulleys I have. 3.47, 3.33 and 3.12
I was running the 7 x 3.33 and was getting 9lbs boost at 588rwhp. I then swapped to the 3.12 to get 12lbs and pushed 628rwhp. I then swapped to the 7.8 lower and went to the 3.47 upper to keep things were they were at 12psi.
I did a cam swap and used the Lingenfelter GT1 that's really a teeny baby cam compared to the norm but it provides me what I was looking for. Results on the dyno was 677rwhp.
I also put Holley fuel rails on. Very sweet setup I must say.

BEASSTING · 02-04-2015, 08:36 PM

Nice! What gears in the rear? I had 4.10's & a centri(mustang) & loved it...by the time i got in my powerband that blower would kick in &

...it was no where near your power level though!!!

Bo White · 02-04-2015, 10:05 PM

Stock 3.45s and will be doing a th400 swap eventually. I'm porting a set of cylinder heads for myself right now too.

BEASSTING · 02-04-2015, 10:44 PM

Yea at that power level I imagine there's lil room for error with the M6. I bet you're gonna spend a lil EXTRA time on them heads...

I see you're in Alabama. How far are you from Cottonwood Dragway? You ever run there & are they still open? Last few times I called they just said they weren't running??

Bo White · 02-05-2015, 02:52 AM

Nah I've never been there. I'm in Tuscaloosa county.
I'll actually spend less time on mine than I would on a customers lol.

Behic2320 · 02-05-2015, 10:39 AM

Awesome ride, that's stance looks absolutely insane.

oakley · 02-05-2015, 11:06 AM

Curious as to what rims those are and what they are wrapped in. Love the car man!

wiles426 · 02-05-2015, 11:27 AM

That is a awesome looking ride.

Bo White · 02-05-2015, 12:09 PM

Quote:

Originally Posted by oakley

Curious as to what rims those are and what they are wrapped in. Love the car man!

Listed under the suspension part of the mods. Forgestar F14 22x9 and 22x10.5 with 265/35 and 295/30 tires.

Bo White · 09-07-2016, 12:22 AM

Update on my ride. Changed from FI to NA and from 22s to 18s. List on 1st page is updated.

12-30-2013, 09:36 PM	#15
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Yes, I bought it from him. Thanx __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

10-02-2014, 04:52 AM	#16
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Just an update. Put the splitter back on when I replaced the bumper and had the grill painted. Swapped the 60lb injectors for 80s and swapped to a 3.12 pulley. Also took the Vortech intake off. Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

10-02-2014, 07:29 AM	#17
camaro500 Drives: 2017 Jaguar F Type R Tuned 498awhp Join Date: Apr 2013 Location: Canada Posts: 871 View My Garage	Really nice setup! How do the KW ride? __________________ JRE cammed w.full bolt ons 444rwhp/422rwtq SOLD 2017 Jaguar F Type R ''Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.'' - F. Bueller

10-02-2014, 08:08 AM	#18
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Fairly stiff. Not too bad though. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

02-04-2015, 08:20 PM	#19
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Update I swapped my lower 7" pulley for a 7.8" so I could have use of the pulleys I have. 3.47, 3.33 and 3.12 I was running the 7 x 3.33 and was getting 9lbs boost at 588rwhp. I then swapped to the 3.12 to get 12lbs and pushed 628rwhp. I then swapped to the 7.8 lower and went to the 3.47 upper to keep things were they were at 12psi. I did a cam swap and used the Lingenfelter GT1 that's really a teeny baby cam compared to the norm but it provides me what I was looking for. Results on the dyno was 677rwhp. I also put Holley fuel rails on. Very sweet setup I must say. Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

02-04-2015, 08:36 PM	#20
BEASSTING Drives: 2010 IBM Camaro SS Join Date: Dec 2013 Location: GA Posts: 263	Nice! What gears in the rear? I had 4.10's & a centri(mustang) & loved it...by the time i got in my powerband that blower would kick in & ...it was no where near your power level though!!!

02-04-2015, 10:05 PM	#21
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Stock 3.45s and will be doing a th400 swap eventually. I'm porting a set of cylinder heads for myself right now too. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

02-04-2015, 10:44 PM	#22
BEASSTING Drives: 2010 IBM Camaro SS Join Date: Dec 2013 Location: GA Posts: 263	Yea at that power level I imagine there's lil room for error with the M6. I bet you're gonna spend a lil EXTRA time on them heads... I see you're in Alabama. How far are you from Cottonwood Dragway? You ever run there & are they still open? Last few times I called they just said they weren't running??

02-05-2015, 02:52 AM	#23
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Nah I've never been there. I'm in Tuscaloosa county. I'll actually spend less time on mine than I would on a customers lol. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

02-05-2015, 10:39 AM	#24
Behic2320 SoCal HT5 COTW 4/21/13 Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011 Location: Sandy Eggo Posts: 3,047	Awesome ride, that's stance looks absolutely insane. __________________

02-05-2015, 11:06 AM	#25
oakley Drives: 2011 Chevy Camaro Join Date: Nov 2013 Location: AZ Posts: 22 View My Garage	Curious as to what rims those are and what they are wrapped in. Love the car man! __________________

02-05-2015, 11:27 AM	#26
wiles426 Drives: 2010 2LT RS Join Date: Dec 2014 Location: Clio Mi Posts: 55	That is a awesome looking ride.

09-07-2016, 12:22 AM	#28
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 7,873	Update on my ride. Changed from FI to NA and from 22s to 18s. List on 1st page is updated. Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE stock for now.... Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X