09-23-2014, 10:33 PM | #1 |
Drives: 2014 camaro ss Join Date: Jan 2014
Location: Camdenton Mo
Posts: 35
|
c5 z06 wheels
Will they fit on a camaro with brembos
|
09-24-2014, 06:30 AM | #2 |
|
You will have to get wheel spacers for Corvette wheels to fit. They have a different backspacing than what you need. You can contact Factory Reproductions, they make reproduction Corvette wheels, and they'll be able to give you all the info you need.
|
09-24-2014, 08:56 AM | #3 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
18x9.5" (+40) Corvette C5 Z06 wheels WILL fit on the rear without spacers. The only modification being the need to tie back the emergency brake cables with a couple zip ties so they don't rub on the inner wheel. That is the ONLY Corvette wheel that I know of that has been proven to fit without any need for spacers or other modifications.
|
09-24-2014, 04:37 PM | #4 |
Drives: 2014 camaro ss Join Date: Jan 2014
Location: Camdenton Mo
Posts: 35
|
Thanks for the info
|
09-24-2014, 08:46 PM | #5 | |
|
Quote:
|
|
01-19-2015, 11:06 PM | #6 | |
Drives: IBM L99 1SS/RS A6 Join Date: May 2010
Location: Soledad CA
Posts: 88
|
Quote:
__________________
AMERICAN REVOLUTION RACING BLUE_SHARK |
|
01-20-2015, 12:48 AM | #7 |
"Cam Only"
|
Better question should be, where on earth can I find c5 Z06 wheels in a 9.5 18" +40
Or a 10.5 18" +53 ??
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
01-20-2015, 02:39 AM | #8 |
TEAM NIGHTFURY
Drives: 2010 2SS/RS Join Date: Jun 2014
Location: OAHU, HI
Posts: 227
|
What about z06 rims on the front ? I have a rear set but can they fit up front ?
__________________
|
01-21-2015, 12:00 PM | #9 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
I ran 18x9.5 ZR1 replicas front and back, if you search you can see what work was needed.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
|
|
|
|