nitrous plate

[camaro_nos]

hi

i have new nitrous system

https://nitrousoutlet.com/i-30560016...te-system.html

the plate size is 102 mm

and my intake and tb is stock ls3 ( camaro 2010 )
So it will not fit .

i asking for link plate working with my nitrous system and my setup ( stock ls3 intake &tb )

i find this but i need to be sure

https://nitrousoutlet.com/i-30560097...-fittings.html

[CamaroCracka]

That 90mm plate should work fine with the LS3. IIRC, when I installed my NX one I had to flip the TB for some reason, extend the plug and ditch the engine cover, well I notched the cover and ditched it when I went turbo.

[Badbubba]

Originally Posted by CamaroCracka

That 90mm plate should work fine with the LS3. IIRC, when I installed my NX one I had to flip the TB for some reason, extend the plug and ditch the engine cover, well I notched the cover and ditched it when I went turbo.

Yeah, got to rotate 180°. The plate sandwiched between the intake and tb, extends the tb to the front of the vehicle. The actuator on the tb then hits the pulley, thus the flip, iirc.

[Badbubba]

Originally Posted by camaro_nos

hi

i have new nitrous system

https://nitrousoutlet.com/i-30560016...te-system.html

the plate size is 102 mm

and my intake and tb is stock ls3 ( camaro 2010 )
So it will not fit .

i asking for link plate working with my nitrous system and my setup ( stock ls3 intake &tb )

i find this but i need to be sure

https://nitrousoutlet.com/i-30560097...-fittings.html

Nitrous Outlet used to have Camaro specific setups, I believe they still do. Contains all the basic items needed. TB wire extension, pressure safety switch, fuel rail adapter, controller, solenoids, pre-bent lines, etc. Contact N.O. They have great customer service. Since it's new, I'd send it back and get the correct kit. Unless it's a "new" unused kit bought 2nd hand. If so, you'll need that plate and then piece together any other components needed. I've had my N.O. for about 10 years, no issues. But mine's more than the basic kit.