Anyone in the Smyrna - Nashville, TN Area Doing Any Mods Soon?

[RAYSRT8]

If anyone in the Smyrna - Nashville, TN area plan on doing any mods soon then let's get together and help each other out. Working on big projects along stink plus I would like to meet someone else with a Camaro in this area. By the way I have a compressor and air tools...

[RAYSRT8]

Bump

[RAYSRT8]

No one local doing any mods?

[VcrusaderV]

ya dude. I want to install a new intake and tint my windows. I have some disablities that prevent me from doing much, but I really used to love to wrench on my car. I have a 66 Chevelle (SS 396) that I was in the process of restoring with my sons. Well...I deployed to Iraq, and that dream is on the back burner. Its been 3 years and I get around good now, and the boys really want to get the car going. Im afraid you have a lot more to offer than I do though. Let me know if you need some help.

[RAYSRT8]

I am just an average mechanic at best, but if you need help just let me know. I eventually do get done what I set out to do, but it may take me longer than others...LOL

[RAYSRT8]

bump

[Speedy1975]

I'm in Smyrna friend. Always tinkering on my hot rod. Not a Camaro, but the help's the same haha.

[RAYSRT8]

Originally Posted by Speedy1975

I'm in Smyrna friend. Always tinkering on my hot rod. Not a Camaro, but the help's the same haha.

Are you planning on doing any mods anytime soon? I want hold you owning a Dodge against you.. LOL.

I am planning on doing quite a bit to mine real soon.

I have a Billett 3.2" Gator SC Pulley, BMR Sways, Springs, Trailing Arms, Toe Links and Bushing Kit to install and I also have the following on the way:

LPE Dual Fuel Pump
Fidanza 7.6 Dual Disc Clutch
Dynamic Fuel Injectors
Upgraded Fuel Rail
Dual Pillar Pod
AEM AFE Guage
AEM Boost Guage

As you can see it a lot of work to take on so I am going to take a week off to complete this plus if anyone else has anything they need help with.

[Speedy1975]

Lemme know when you're gonna be doing some things and I'll try to get by and help. I never see you out and about?

[RAYSRT8]

I know.. I am always working... LOL.. Welcome to management...

I really apprciate that and only if you let me return the favor...I am not looking just for help I am also looking to meet folks in this area and for us to help each other out.

[Speedy1975]

Cool by me. I love all cars. Mine's about done...just gotta get her dialed in at the track now.

I'm OCD so working with me on my car may prove difficult hahaha. I paint bolt heads and crap I'm so anal.

[RAYSRT8]

My wife says I am OCD as well "Obsessive Camaro Disorder" LOL.... I would rather have a perfection helping than someone that wants to rush..

[RAYSRT8]

Well here is the list of Mods I am starting on this week-end.. I am sure I will not get all the way done, but I should have it completed by next week. All depends on if we get the snowfall they are calling for tomorrow night if I get to start on time. I am so sick of the cold weather and I can not wait for spring.

LPE Dual Fuel Pump,BMR Springs, Sways, Trailing Arms, BMR Pro Bushing Kit, Fidanza 7.6 Series Dual Disc Clutch, JRE Upgraded Fuel Rail, 85 LB Dynamic Injectors, Dual Pillar Guage Pod, AEM Wideband, AEM Boost Gauge, 3.25 Billett SC Pulley with Gator Grip, BMR 4 Point Strut Tower Brace, BMR Drive Shaft Safety Loop and updated JRE Tune. I am also removing the rear-end pumpkin and mailing it to Jannetty Racing and they are sending me an upgraded unit that has Billett Caps, upgraded Posi Unit and 4:10 Gears.

[Speedy1975]

Sweet man, I can't wait to check out the ride.

You sure you want 4.10 gears? Mine are 3.92 from the factory and it's quite tall in 1st.

You auto or manual?