Eagle Eye Headlights with HIDs

[erk5000]

Originally Posted by SMITTY8

In thinking about getting these, do you think it's possible to just Wire the halo to a tap-a-circuit and into the fusebox. Preferably the cigarette lighter fuse? Instead of into the parking lights or side markers

Yes you can. I had done this prior to getting RS headlights. It is very easy.

[SMITTY8]

Originally Posted by erk5000

Yes you can. I had done this prior to getting RS headlights. It is very easy.

cool thanks, yea i plan on purchasing next week, and will most likely wire them from the fusebox to a switch. hopefully this will prevent the halo from going out by parking lights quickly flashing.

also can can i join both left and right postive wire together or should I use 2 different power sources for each side?

sorry I just dont want to reinstall once i put them in.!

[erk5000]

Originally Posted by SMITTY8

cool thanks, yea i plan on purchasing next week, and will most likely wire them from the fusebox to a switch. hopefully this will prevent the halo from going out by parking lights quickly flashing.

also can can i join both left and right postive wire together or should I use 2 different power sources for each side?

sorry I just dont want to reinstall once i put them in.!

I had both headlights wired to one source of power.

[SMITTY8]

ok I pulled the trigger and ordered earlier than expected!...after spending 10+ hours looking into these, I was convinced that these are what I want, im going with a non hid kit and gonna use a h11(hopefully it fits) ultrabright bulb. Will wire halos to a switch on my dash.
I will post a thread of the entire install from start to finsh!

wish me luck fellas!

[erk5000]

Originally Posted by SMITTY8

ok I pulled the trigger and ordered earlier than expected!...after spending 10+ hours looking into these, I was convinced that these are what I want, im going with a non hid kit and gonna use a h11(hopefully it fits) ultrabright bulb. Will wire halos to a switch on my dash.
I will post a thread of the entire install from start to finsh!

wish me luck fellas!

Sounds good! Good luck!

[jeanpaulvieira]

Guys, I had CCFL angel eyes installed in my Camaro 2012 SS (Brazil), but when it's on the parking assistance sound alert stops working. It seems that the CCFL makes some electronic noise or something like that...
Do you have any suggestion to solve this problem?

tks.

[Hayden]

So I just ordered H13 DDM Hid Kit.. Im using them in my stock housings.. I know I know Im an ass hole thats going to be too bright.. But Im doing it always until I get my Eagle Eyes! Seeing as I purchased the Relay and H13 kit.. and the eagle eyes require the h9 bulb. I would only have to purchase different bulbs right?! Not a whole different kit?

I feel like its obvious that only bulb sizes would change but I just want to clarify.

Thanks.

[Hamilton2400]

Originally Posted by Hayden

So I just ordered H13 DDM Hid Kit.. Im using them in my stock housings.. I know I know Im an ass hole thats going to be too bright.. But Im doing it always until I get my Eagle Eyes! Seeing as I purchased the Relay and H13 kit.. and the eagle eyes require the h9 bulb. I would only have to purchase different bulbs right?! Not a whole different kit?

I feel like its obvious that only bulb sizes would change but I just want to clarify.

Thanks.

That is correct sir. All you'll need next is the h9 bulbs.

[Hayden]

Originally Posted by Hamilton2400

That is correct sir. All you'll need next is the h9 bulbs.

Phew, good. I was worried for a moment.. DDM Shipping from china is less than appealing but. Supposedly great product though..

[C586]

Originally Posted by Hayden

Phew, good. I was worried for a moment.. DDM Shipping from china is less than appealing but. Supposedly great product though..

They aren't all that great. Most people that get HID from them haven't used any other HID products before. Thy are the same kits you get on ebay for 15 bucks or whatever. They aren't that great at all. I have used them a few times. When you need the warranty replacement parts it will take 2-3 weeks. They work like AAC. they want the old parts back most of the time so it takes forever because they are dropped shipped from china after they get the old one back. It's cheaper just to order an extra ballast and bulb. There aren't very many good aftermarket kits. Especially ballasts. I'd recommend a denso d2s with a converter.