Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Chevy Camaro vs...


Reply
 
Thread Tools
Old 07-06-2018, 11:03 AM   #1
LasVegasSS
 
Drives: 2013 Black 2 SS/1988 Firebird GTA
Join Date: Oct 2013
Location: Las Vegas
Posts: 10
Smile 2013 2 SS Camaro vs 2018 SS Camaro

So, I had to take my 2013 SS back in to my local dealership to correct an A/C door problem that I am still having issues with. The nice people at Henderson Chevrolet were kind enough to give me a 2018 SS Camaro with 1400 miles on it as a loaner.


Here are my observations based upon about 100 miles of driving to and from work in the last day.


Handling: 2018 SS all the way. With the different settings, touring, sport, and track, this car feels exceptional. It hugs the road. It feels more like a new Mustang than a Camaro in that it no longer feels like a big muscle car the way the 2013 does. It feels more like a sports car. The magnetic ride keeps it glued to the road. I've owned a 2005 Mustang GT, a 2011 Nissan 370 Z and an SS Camaro. The way the new SS handles feels like a cross between the Mustang and the 370 Z. I had a new Mustang GT on vacation this summer and the new SS feels very similar in its handling.



Exhaust note: 2018 SS wins again. As soon as you start it up, it rumbles. At highway speeds it growls like a big dog. Even with a K&N cold air intake on my 2013 SS, it doesn't sound as mean.


Electronics/Gauges: 2013 SS hands down. Everything on the 2018 is digital and clustered behind the steering wheel. I prefer the actual gauges in the 2013. They are easier to find and read. The 2018 Heads up Display is in color whereas the 2013 is monochrome, but I still prefer the look of the 2013 electronics vs the 2018. I think the infotainment unit on my 2013 SS is crap, yet I still like it better than the 2018.



Performance: Obviously, I can't take the 2018 to the track the way I have my 2013, but the 2013 wins again. The 2018 has about 30-40 more horses than my 2013 with the intake, but the way the power comes on is much different. On the 2018, you really have to get into the gas pedal to get it moving. On the 2013, you barely have to tap the pedal to get it moving, and if you really get into it, look out. I'm sure on the track, it would be pretty close with the 2018 likely winning, but around town and in traffic, I prefer the 2013 because it seems to accelerate quickly with less pedal effort.



Interior: Draw. Both my 2013 and the 2018 have the leather interior. I really like the new seats because they hug your body and feel more "sports car-like". They remind me of the way my 370 Z's seats felt. I'm not sure that they would be as comfortable on long trips as the 2013's though. Both cars are fairly cramped in the back seat. The 2018's rear window seams like it's even smaller than the 2013's and a bit harder to see behind you. It may be my imagination, but it looks like the 2018's trunk is bigger than the 2013's.


Styling: 2013. The 2013 just looks like a muscle car to me. It's big, bold, and says, "get out of my way, I'm coming through". It has a distinctive look with styling cues that remind you of the Camaros of the 60s. Although the 2018 has a distinctive look, and you still know that it's a Camaro, I don't think it shows as much heritage. The 2018 is a beautiful car, but I prefer a car that looks like a muscle car when lined up next to a Challenger or a Mustang.


To sum it up, the 2018 is a beautiful, great handling sports car, but I prefer our 5th Generation Camaros. If the dealership was hoping I would trade my 13 SS in for a 2018 SS, they are going to be disappointed.
LasVegasSS is offline   Reply With Quote
Old 07-07-2018, 09:18 PM   #2
LCPLPunk
Formerly 5LAVE1
 
LCPLPunk's Avatar
 
Drives: 2010 Camaro SS/2SS
Join Date: Jul 2016
Location: Near DC
Posts: 1,111
Have you upgraded your 2013 suspension at all?
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."

R2C Cold Air Intake / VMAX Throttle Body / Speed Engineering LTHs / 3.91 gears / DynoSteve tuned / Z28 Replicas in rear (275 square)/ 1LE Suspension / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Transmission Dipstick
LCPLPunk is offline   Reply With Quote
Old 07-10-2018, 06:10 PM   #3
LasVegasSS
 
Drives: 2013 Black 2 SS/1988 Firebird GTA
Join Date: Oct 2013
Location: Las Vegas
Posts: 10
Hi LCL,


I have not upgraded my 2013 suspension at all yet. My 2013 is stock except for the intake. I'm 3 payments away from it being paid off and then I'll start spending money on it. What would be your suggestion of the first thing to do for the suspension?
LasVegasSS is offline   Reply With Quote
Old 07-10-2018, 07:03 PM   #4
KenKat
 
KenKat's Avatar
 
Drives: 2014 2LT RS Summit White
Join Date: Apr 2017
Location: Cincinnati
Posts: 261
Nice write-up!

When I had to take my Camaro back for warranty service, I got a Chevy Cruise...
KenKat is offline   Reply With Quote
Old 07-14-2018, 08:19 AM   #5
Royal Tiger
Sd Kfz 182
 
Royal Tiger's Avatar
 
Drives: 2013 2SS/RS L99 GFX Convertible
Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,043
Quote:
Originally Posted by LasVegasSS View Post
Hi LCL,


I have not upgraded my 2013 suspension at all yet. My 2013 is stock except for the intake. I'm 3 payments away from it being paid off and then I'll start spending money on it. What would be your suggestion of the first thing to do for the suspension?
Junk all the bargain basement crap Chevy put on the car to save money. It makes a WORLD of difference. I’d take the 2018 on in your above comparison.
Royal Tiger is offline   Reply With Quote
Old 07-14-2018, 10:26 AM   #6
LCPLPunk
Formerly 5LAVE1
 
LCPLPunk's Avatar
 
Drives: 2010 Camaro SS/2SS
Join Date: Jul 2016
Location: Near DC
Posts: 1,111
Depends what your goal is really, but I've upgraded my front suspension with 1LE struts and I can tell it's WAY better than the stock struts. The ride is still smooth, but much more controlled. I've also got a ZL1 rear sway bar to go on.


You can check out my sig for a good mod list. I've done a crap-ton of research to pick those parts.
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."

R2C Cold Air Intake / VMAX Throttle Body / Speed Engineering LTHs / 3.91 gears / DynoSteve tuned / Z28 Replicas in rear (275 square)/ 1LE Suspension / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Transmission Dipstick
LCPLPunk is offline   Reply With Quote
Old 07-18-2018, 10:18 PM   #7
Screwblower
 
Drives: 14' 2ss convertible
Join Date: Oct 2017
Location: In my underwear
Posts: 101
I’ll take a 15 - Z-28
Screwblower is offline   Reply With Quote
Old 07-19-2018, 09:07 PM   #8
pyroguy
Started#gottalovethatblue
 
pyroguy's Avatar
 
Drives: ABM #830
Join Date: Apr 2013
Location: MO
Posts: 3,128
Nice write up, I’d concur with your final assessment. I’ve driven a few newer SS Camaros and I’m not signing up for trading my ‘10 SS out any time in the near future. The 6th gen SS cars are nice and the newer technology is great but I like the interior space of the 5th gen and overall look better.
__________________
'10 Camaro 2SS/RS | Aqua Blue #830 of 3,903 | Silver Stripes
Check out my build thread
pyroguy is offline   Reply With Quote
Old 07-25-2018, 12:25 PM   #9
DT10
 
DT10's Avatar
 
Drives: 2015 2SS/RS
Join Date: Feb 2018
Location: Poughkeepsie
Posts: 70
To me the interior of the new body style just looks like any other modern car. Nothing about it says “Camaro”. Its gone typical chevy engineering, cram everything into one space or component. And I think that makes the interior boring to look at. The exterior styling is ok but again a departure from the classic Camaro and trying to look more exotic. Its following in the Corvettes footsteps, just not as gracefully.
DT10 is offline   Reply With Quote
Old 08-06-2018, 12:05 PM   #10
Nb1081
 
Drives: 10 2ss/rs
Join Date: Jul 2018
Location: Shelby ny
Posts: 173
Quote:
Originally Posted by LCPLPunk View Post
Depends what your goal is really, but I've upgraded my front suspension with 1LE struts and I can tell it's WAY better than the stock struts. The ride is still smooth, but much more controlled. I've also got a ZL1 rear sway bar to go on.


You can check out my sig for a good mod list. I've done a crap-ton of research to pick those parts.

I noticed in sig you have speed engineering headers How do you like them how long have you had them any regrets im torn on getting them being so cheap cause basically im to poor to b cheap i rather spend it once
__________________
]10 2ss/rs ls3 pretty much stock sctx4 cai mbrp axle back bmr toe rods 10.4wires

I've always been crazy. It keeps me from going insane
Nb1081 is offline   Reply With Quote
Old 08-10-2018, 09:52 AM   #11
pyroguy
Started#gottalovethatblue
 
pyroguy's Avatar
 
Drives: ABM #830
Join Date: Apr 2013
Location: MO
Posts: 3,128
Quote:
Originally Posted by Nb1081 View Post
I noticed in sig you have speed engineering headers How do you like them how long have you had them any regrets im torn on getting them being so cheap cause basically im to poor to b cheap i rather spend it once
Do you want/need high flow cats? If so I'd say go a step above and get Texas Speed, Stainless Power, or OBX headers. If not, the choice is yours, but many people have had success with Speed Engineering here. Some have been less lucky, but there's more happy customers than sad ones it seems. I know you didn't ask my opinion, but I've talked with a lot of Speed Engineering customers over the years and more are happy than not. The welds are sometimes a little ugly and the pipes are welded to the flanges is not all that smooth, especially compared to a Kooks, SW, or ARH. Also, sometimes people have to dimple a pipe to get it to not touch something, typically a frame rail. However, it has been shown that dimpling a header only effects its ascetic appeal not its performance. Good luck and happy modding!
__________________
'10 Camaro 2SS/RS | Aqua Blue #830 of 3,903 | Silver Stripes
Check out my build thread
pyroguy is offline   Reply With Quote
Old 08-10-2018, 05:06 PM   #12
Royal Tiger
Sd Kfz 182
 
Royal Tiger's Avatar
 
Drives: 2013 2SS/RS L99 GFX Convertible
Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,043
I try and buy parts made in America when possible, not China. Very happy with my AR headers.
Royal Tiger is offline   Reply With Quote
Old 08-11-2018, 07:20 AM   #13
Nb1081
 
Drives: 10 2ss/rs
Join Date: Jul 2018
Location: Shelby ny
Posts: 173
Quote:
Originally Posted by Royal Tiger View Post
I try and buy parts made in America when possible, not China. Very happy with my AR headers.
Id b happy with your headers too but way to rich for my blood im just a poor union bricklayer but i am leaning more towards texas speed and pyroguy i appericate your info/input thats purpose of these forums i was never steered wrong on pirate 4x4 or cummins forum which are very similar except more member discounts from more vendors
__________________
]10 2ss/rs ls3 pretty much stock sctx4 cai mbrp axle back bmr toe rods 10.4wires

I've always been crazy. It keeps me from going insane
Nb1081 is offline   Reply With Quote
Old 08-19-2018, 09:31 AM   #14
GossipSquirrelJelena

 
GossipSquirrelJelena's Avatar
 
Drives: 2015 Mustang GT. Supercharged.
Join Date: Jul 2014
Location: South Jersey
Posts: 799
I had Texas Speed headers on my 11SS. They seamed pretty high quality.
__________________
9.34@145
GossipSquirrelJelena is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:01 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.