09-09-2018, 06:54 PM | #1 |
Drives: 2015 ZL1 Join Date: Oct 2010
Location: California the Republic
Posts: 521
|
NPP Flaps Not Working w/ Mild 2 Wild
I just installed the Mild 2 Wild and the NPP flaps do not switch. I can hear the clicking noise coming from the Mild 2 Wild box when I press on or off on the remote, but nothing happens. I successfully programmed the remote to the MyLink buttons as well. Everything was installed correctly so I’m wondering if I missed something or there’s a deeper issue that needs to be discovered. Any ideas?
|
09-09-2018, 08:02 PM | #2 |
Team 913
Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015
Location: USA, Central CA
Posts: 1,119
|
Wish i could help my man, i have a Forza 3 way controller... no remote.
Double check that everything is hooked up correctly... NPP working prior to install? Where in CA are you? |
09-09-2018, 08:39 PM | #3 |
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,485
|
Don't really know but;
So if you squat back there (with eye protection, sunglasses at least, don't want that metal packing goin in your eyes that's BAD) and see if the flaps actuators move upon initial startup in the OEM configuration? That was you can see if the vacuum lines and valves and actuators are working. If yes, Then see if a proper signal is coming out of the module, I don't recall if it was 12v electrical to a vacuum valve or what. |
09-10-2018, 11:23 AM | #4 |
Drives: 2013 VR ZL1, M6 Join Date: Nov 2017
Location: PA
Posts: 335
|
Have you rev'd it up or taken it for a drive to determine if the flaps aren't working?
The flaps are always open at idle, so you won't hear them close/open unless you rev it up a bit, or take it for a spin and get the car up past 1k rpm.
__________________
#3257 | 485whp 526wtq | K&N 63-3079 | Gates K080660HD (Green Belt) | ACDelco UPF48R | ZL1 Addons Wicker Bill | Mild2Wild
|
09-10-2018, 11:41 AM | #5 |
Drives: Camaro 1LE Join Date: May 2018
Location: USA
Posts: 1,348
|
|
|
|
Tags |
mild 2 wild, npp exhaust, zl1 |
|
|