12-19-2014, 06:51 AM | #1 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
P0306 Code and Service stabilitrac
P0306 Code and Service stabilitrac . Anyone knows what this possibly could be. Cleared code and cars runs fine. MSD 8.5mm wires and NGK Laser Iridium plugs installed. Would a cylinder 6 misfire trigger the stabilitrac mode or is this possibly tune related?
|
12-23-2014, 07:32 PM | #2 | |
SHKE BKE
Drives: 2013 Camaro Join Date: May 2014
Location: SoCal
Posts: 3,108
|
Quote:
Everytime someone posts about a misfire they also complain of the stabilitrac light coming on so I'm sure it's related. |
|
12-26-2014, 01:33 AM | #3 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
|
12-26-2014, 01:35 AM | #4 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
Compression
|
01-03-2015, 11:51 PM | #5 |
Drives: 2010 camaro ss Join Date: May 2009
Location: Tacoma WA
Posts: 779
|
did this start after the parts or before? and yes it will turn your stability light on.
|
01-07-2015, 07:21 PM | #6 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
|
01-08-2015, 02:37 PM | #7 |
Drives: 2014 v6 Join Date: Nov 2013
Location: NY_LI
Posts: 395
|
I'm having the same issues. Goes from p0306 to p0300, I'm starting to get Te feeling it has sometbing to do with the cold temps bc it happned last winter. Was fine allll summer and now it's happening again
|
01-08-2015, 03:52 PM | #8 |
SHKE BKE
Drives: 2013 Camaro Join Date: May 2014
Location: SoCal
Posts: 3,108
|
Most likely an ignition coil, a 306 is for cyl 6 which can cause both codes
|
01-11-2015, 09:41 PM | #9 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
Knocking sound now like spun rod bearing.
|
12-07-2018, 07:23 PM | #10 |
Drives: 2012 Chevrolet Camaro SS Convt Join Date: Nov 2018
Location: Bradenton, FL 34202
Posts: 43
|
What was the verdict on your car - I’m going through exactly the same things . .
|
12-08-2018, 08:54 PM | #11 |
Drives: Camaro 2012 v6 nanual transmission Join Date: Nov 2018
Location: Austin tx
Posts: 2
|
Did you got it fix
|
12-12-2018, 09:17 PM | #12 |
Drives: 2010 Camaro 2SS RS Join Date: May 2017
Location: Wichita, KS
Posts: 30
|
In for diagnosis. Throwing sporadic p0300 recently since it got colder. Changed plugs last night, threw code again today. About to pick up wires and hope for an easy fix. Almost wish I was getting a p0171 or p0174 so I knew a bank was running lean .
__________________
2010 Camaro 2SS/RS M6. Vararam Street Spec tune intake. Speed Engineering 1-7/8 LTH. Powerbond 25% UDP. Custom camshaft from Powell. .660" dual springs from BTR. Trunnion upgrades. Chromoly pushrods.
Tuned by DynoSteve at RDPStore. |
12-12-2018, 09:55 PM | #13 |
Space Shuttle Aficionado
|
If the CEL is flashing and you're getting a "Service Stabilitrak" message on your DIC, your car is misfiring. You'll have to get a code reader to see exactly which cylinder is misfiring. Can be plugs, wires or ignition coils. Could be something as simple as something came unplugged, or something more extensive.
__________________
|
|
|
Thread Tools | |
|
|