12-30-2020, 05:27 PM | #1 |
Drives: 2018 ZL1 1LE #928 Join Date: Sep 2013
Location: Indiana
Posts: 17
|
Question about knock sensor pigtail
Found an exhaust manifold leak on cylinder number5 which burned up the pigtail to the knock sensor
I have a new pigtail and sensor but my question is is the pigtail spliced into the wiring harness or is it on continuous wire or lead I'm asking because the least amount of cutting the better Thanks Dennis AKA:ZapperZ |
12-31-2020, 11:27 PM | #2 |
Drives: 18 ZL1-1LE, 10 JKU Join Date: Jul 2018
Location: AR
Posts: 585
|
If you have a pic of it i can try to track it down in mine and see if i can tell. Engine bay is torn to pieces for a cam/header/oil pump install
|
01-09-2021, 01:51 PM | #3 | |
Drives: 2018 ZL1 1LE #928 Join Date: Sep 2013
Location: Indiana
Posts: 17
|
Quote:
The new leads of the pigtail are short so I'm going to strip back the burned harness wires and solder & heat shrink Hey Thanks |
|
|
|
Post Reply
|
|
|