07-14-2020, 08:45 PM | #603 |
Drives: 2014 Camaro Join Date: Jan 2020
Location: NE
Posts: 31
|
|
07-14-2020, 08:48 PM | #604 |
Drives: 2014 Camaro Join Date: Jan 2020
Location: NE
Posts: 31
|
|
07-15-2020, 07:03 AM | #605 |
Drives: 2010 camaro limited edition turbo Join Date: Mar 2014
Location: saint petersburg, florida
Posts: 500
|
I am making slow progress for my Zl1 bumper. I have limited hours to work on it due to my shop being so busy but I am at the mid point, so I made a PART 1 video of my progress so far. I posted the video on Youtube and it is 25 minutes long but is very comprehensive for those who would like a step by step process. You can ignore some of the video because I had to move some components because I have a twin turbo set up. I hope this is informative.
https://youtu.be/Q6LI6ZWb2Sg Last edited by alice; 07-15-2020 at 07:06 AM. Reason: added information |
07-18-2020, 11:04 PM | #606 |
Drives: 2014 2LT Camaro RS Join Date: Sep 2016
Location: Uvalde
Posts: 69
|
So I know people been having issues with the ZL1 fog lights
So here’s my issue I had my ones that came with kit broke. So I ordered new ones tested everything boom everything works like it’s suppose to. As soon as I put bumper on and bolt it up, the DRL won’t work when turn signal is plugged in. Then I finally get it to work by just cycling lights on and off. Then the switch backs for fog lights won’t work. I have the Fog light spliced into DRL for headlight because I want the fog lights on all the time. And I spliced the switch back to the turn signal. Any suggestions |
07-19-2020, 02:56 PM | #607 | |
Drives: 2014 Camaro Join Date: Jan 2020
Location: NE
Posts: 31
|
Quote:
|
|
07-19-2020, 06:17 PM | #608 |
Drives: 2014 2LT Camaro RS Join Date: Sep 2016
Location: Uvalde
Posts: 69
|
|
07-20-2020, 03:17 AM | #609 |
WHPLSH
Drives: 2010 SS Maggie,ARH,Meth,AFE Coilove Join Date: Mar 2010
Location: San Clemente ,Ca
Posts: 128
|
The whole 14-15 wiring on a 10-13 is an absolute nightmare I still don't have mine working yet. I had to walk away before I went ballistic what got me was I kept killing the battery and did not know it from so many tests so something would work then wouldn't. Almost had a mental breakdown lol not really but shit was flying in the garage. and I even call two headlight shops to fix and wire correctly and neither wanted anything to do with it
|
07-20-2020, 06:51 PM | #610 |
Drives: 2014 Camaro Join Date: Jan 2020
Location: NE
Posts: 31
|
First is of the addafuse to the ignition fuse
Second is the load coming off that, splits off to the 5 amp fuse inline and then to the power on the fogs |
07-20-2020, 07:19 PM | #611 |
RIP Betsy ( Vitara )
|
Yea that's how I'm wired too.
__________________
First retrofitted 2014 mylink. |
09-26-2020, 07:44 AM | #612 |
Drives: 2010 camaro limited edition turbo Join Date: Mar 2014
Location: saint petersburg, florida
Posts: 500
|
Finally got the painting finished on my ZL1 Ikon front bumper. All the pieces are simply setting in their respective positions because I am not ready to install them permanently. But you get the idea.
|
09-26-2020, 02:36 PM | #613 | |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
Quote:
Looks good btw! I’ve had this bumper for a couple months now and just saw this post lol. I need to work on the sagging as well. |
|
09-26-2020, 02:41 PM | #614 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
Here’s mine, which as stated the center sags a little.
|
09-27-2020, 07:09 AM | #615 |
Drives: 2010 camaro limited edition turbo Join Date: Mar 2014
Location: saint petersburg, florida
Posts: 500
|
I made my own splitter because all the splitters I looked at stick out too far and I don't want to rip it off on a curb. I use the (2) 10MM bolt hole on the bottom subframe to secure it and should eliminate bumper sag.
|
09-27-2020, 10:41 AM | #616 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Can you show the the holes your talking about??
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|