09-04-2020, 05:10 PM | #1 |
Drives: 2010 2SS Join Date: Jun 2019
Location: Springfield, MO
Posts: 4
|
Flex Fuel Sensor
I was given a SMG flex fuel sensor off of a 6th gen and was wondering if it would work with my 5th gen? From what I can tell it looks exactly the same as the 5th gen ones. Thanks in advance!
|
09-05-2020, 12:43 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
It’s the same sensor just different tubing and you need to build a wiring harness, see my thread in the engine section.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-05-2020, 10:41 PM | #3 |
Drives: 2010 2SS Join Date: Jun 2019
Location: Springfield, MO
Posts: 4
|
Thank you very much
__________________
TSP F-35 Cam Kit, CAI, 3" Long Tube Headers
|
09-06-2020, 06:50 PM | #4 | |
Quote:
https://www.camaro5.com/forums/showthread.php?t=581086 That post doesn't have diddly-squat in it.
__________________
2010 2SS living in Los Angeles
replaced engine @ 93,000 miles w/ crate engine, camshaft by Comp Cams installed by me, replaced valve train parts, 1.4" BMR lowering springs ZL1 factory rims misc: drilled and slotted rotors, fresh air brake cooling system, new speakers, installed reverse camera, muffler delete |
||
09-06-2020, 09:37 PM | #5 | |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Sensor
Quote:
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
09-07-2020, 05:03 AM | #6 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|